02.1 Gluconate vs citrate

Potassium gluconate vs potassium citrate: the potassium figure and the fill

Technical document 02.1 · Reviewed 2026-11-19 · Potassium Gluconate

On this page
  1. Two salts, two identities
  2. The potassium figure, worked from the formula
  3. What the difference does to the fill
  4. Solubility, pH and taste
  5. What the label must declare
  6. When to choose which

Potassium gluconate and potassium citrate monohydrate are both potassium salts, but they are not interchangeable by weight. The gluconate is C6H11KO7 at 234.25 g/mol and carries 16.69% potassium; the citrate monohydrate is C6H5K3O7·H2O at 324.41 g/mol and carries three potassium ions, or 36.16%. The same potassium figure therefore needs about 2.2 times the gluconate mass, and that difference decides the capsule, the stick and the tablet.

In one line

A gram of potassium gluconate carries about 167 mg of potassium and a gram of potassium citrate monohydrate about 362 mg, so the same potassium figure needs roughly 2.2 times the gluconate weight.

Two salts, two identities

Both materials are potassium salts of organic acids, and both are white, water-soluble powders used in supplements. The difference is the anion and the number of potassium ions it balances. Gluconic acid is monobasic, so potassium gluconate carries one potassium per molecule. Citric acid is tribasic, so the fully neutralised citrate carries three, and the commercial monohydrate also carries one molecule of water.

That gives each salt its own CAS number, molecular weight, assay, water limit and label name; a purchase order that says only “potassium” has named neither, and one cannot replace the other by adjusting the scoop.

Potassium gluconate against potassium citrate monohydrate
PropertyPotassium gluconatePotassium citrate monohydrate
CAS number299-27-46100-05-6
FormulaC6H11KO7C6H5K3O7·H2O
Molecular weight234.25324.41
Potassium per gramAbout 167 mgAbout 362 mg
Catalog potassium16.0–17.0%35.0–37.0%
Catalog assay99.0–101.0%99.0–100.5%
Water≤1.0%5.0–6.5%
SolutionClose to neutralAlkaline
Label namePotassium gluconatePotassium citrate (monohydrate)

The potassium figure, worked from the formula

The potassium percentage is not a label convention; it follows from the molecular weight. For the gluconate, 39.10 ÷ 234.25 = 16.69%. For the citrate monohydrate, three potassium ions give 3 × 39.10 ÷ 324.41 = 36.16%. The catalog ranges, 16.0–17.0% and 35.0–37.0%, sit around those theoretical values and absorb method variation.

Read the figures as grams of potassium per gram of salt: 0.167 g/g for the gluconate and 0.362 g/g for the citrate. The ratio between them is 2.17, and it stays the same whatever portion size the formula uses. A 5 g serving of the gluconate carries about 835 mg of potassium; a 5 g serving of the citrate carries about 1,808 mg. The second is not a better material, it is a more concentrated one.

The figure also has to be read against the assay basis. At 1.0% water, a 100% dried-basis gluconate assay is 99% of the salt as received, and the as-received figure is the one that reaches the balance. The citrate's wider water range makes that gap larger.

What the difference does to the fill

Start with a common capsule fill of 500 mg. It delivers about 83 mg of potassium as the gluconate and about 181 mg as the citrate monohydrate. To deliver 99 mg of potassium, the gluconate needs about 593 mg of salt and the citrate about 274 mg. Those are capsule-scale differences: one fits a single capsule comfortably, the other is close to the limit of a standard fill.

The gap widens as the claim rises. A 300 mg potassium portion, which is the EU source-of-potassium threshold, needs about 1.80 g of the gluconate and about 830 mg of the citrate. A 500 mg potassium portion needs about 3.0 g and about 1.38 g respectively. The gluconate answer is a two-gram stick or several large tablets; the citrate answer is a single tablet or a small stick.

The salt choice is therefore a dosage-form decision before it is a taste decision: a capsule size fixed first will fit only one of the two, and a potassium claim fixed first still has to survive the tablet weight and the stick fill.

Solubility, pH and taste

Both salts are freely soluble in water, so neither presents a dissolution problem at a normal serving. The difference is the solution pH. Potassium gluconate gives a solution close to neutral; potassium citrate monohydrate gives an alkaline solution because the citrate anion is the conjugate base of a weak acid. The taste follows the pH and the anion, and the two are not interchangeable in a flavoured drink without a taste panel.

The alkaline citrate solution can also react with acidic components in a formula, which changes the pH of the finished drink and may move the flavour. The neutral gluconate solution is the easier starting point for a system that is already pH-sensitive. Neither point is a health claim; both are formulation facts that belong in the trial, not in the marketing copy.

In solution, both leave the potassium as the ion and an organic anion that microorganisms can use; a liquid needs preservation and a validated hold time either way.

What the label must declare

The ingredient list names the salt that was weighed, not the mineral alone. In the EU, the nutrition declaration states potassium in milligrams and as a percentage of the 2,000 mg reference intake. A product declaring 500 mg of potassium gluconate is declaring about 83 mg of potassium, and a panel whose potassium line carries the salt weight overstates the nutrient sixfold.

In the United States, the Supplement Facts panel declares potassium against the 4,700 mg Daily Value and names the source in the ingredient list, for example “Potassium (as potassium gluconate)”. The 100 mg-per-tablet threshold in 21 CFR 201.306 belongs to oral potassium salt drug products; it is not a supplement maximum, and the buyer's team confirms which framework applies.

A source-of-potassium claim in the EU needs 300 mg per portion, about 1.8 g of the gluconate or 830 mg of the citrate; the salt choice decides whether that fits the dosage form, and the label follows the choice.

When to choose which

Choose the gluconate when the formula wants a neutral solution, a milder taste and a larger fill is acceptable in the capsule, stick or tablet. Choose the citrate monohydrate when the fill is tight, the alkaline solution is wanted, or the label is already built around the citrate. In both cases, the label name, the potassium figure and the market file have to match the salt that was ordered.

A switch either way is a change control: it moves the molecular weight, the potassium per gram, the water limit, the pH and the label name together. The potassium gluconate hub carries the catalog specification; the grades page covers the powder options; the potassium citrate page carries the other specification; the magnesium gluconate page shows how the same gluconate anion behaves with a different cation; the analytical methods library covers the assays; and the quality page describes the release file.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation