02 Grade comparison

Potassium gluconate grades: the powder, the granulation and the fill

Technical document 02 · Reviewed 2026-11-19 · Potassium Gluconate

On this page
  1. Why the grade question is a powder question
  2. Standard powder and granulation, side by side
  3. Flow, dust and the fill
  4. The fill follows 16.7%, not the grade
  5. Specification lines that close the grade
  6. When the granulated grade is wrong

Potassium gluconate has one salt form in the catalog, so a grade here is a physical choice rather than a chemical one: the standard 40 mesh crystalline powder or a granulation made to order. The potassium figure is the same in both, because it is fixed by the formula at about 16.7%. What changes is flow, dust, bulk density, dissolve rate and water pickup — and those decide whether a capsule, tablet or stick can hit its fill.

In one line

There is one potassium gluconate salt, so a grade cannot raise the potassium figure; what it changes is mesh, flow, dust and water, and those decide whether the fill weight can be hit.

Why the grade question is a powder question

The catalog material is potassium gluconate, CAS 299-27-4, with one potassium per molecule. There is no monohydrate, no chelate and no second salt to choose, so a grade cannot make the powder stronger. A granulated lot from the same batch carries the same 16.69% potassium as the standard powder.

What a buyer can change is the particle. A granulation binds fine crystals into larger, more uniform particles; that usually improves flow and cuts dust, while making the powder slower to dissolve. The standard 40 mesh material keeps a faster dissolve and is the usual starting point for sticks and drink mixes.

Water is the variable that behaves like a grade. The anhydrous salt is specified at ≤1.0% loss on drying, but an open liner in a humid room will let water in. A purchase order that says only “potassium gluconate powder” leaves the mesh, the density and the water open.

Standard powder and granulation, side by side

Powder options · potassium gluconate
AttributePowder, 40 mesh (catalog)Granulated, on request
Mesh95% or more passes 40 meshCoarser; set by the granulation
Bulk densityMeasured per lot; request the figureTypically higher; request both figures
FlowWorks in capsules; may bridge in a hopperSteadier on a tablet press
DustNoticeable at transferLess at transfer
Tablet compressionBinder and density check neededThe usual tablet starting point
Stick or sachet fillAccurate fill; disperses fastDissolves more slowly; check the mesh
Caking riskGreater in an open linerLower, though not removed
Specification statusThe catalog itemSeparate specification; any aid declared

The catalog names the mesh but not the bulk density, so ask for the density of the lot being offered. Granulation is a separate specification: it can change the particle-size line and may introduce a granulation aid that has to be declared. It is not a packing option.

Flow, dust and the fill

Dissolution is not the differentiator at this particle size: the salt is freely soluble and the solution is neutral. The differences appear at the filling line. A finer powder can bridge in a hopper, fluidise at the weigh station and leave dust on the equipment; a granulation flows more evenly and is easier to extract.

Bulk density decides how much mass fits a fixed volume. Two 40 mesh lots can differ enough in density to move a capsule fill by several percent, and a volumetric stick filler is more sensitive still. For tablets, density and flow together decide whether the press runs cleanly; a granulated grade is usually trialled first.

Hygroscopy links the powder to storage. Granules cake less in an open liner, but they still take up water; the 25 kg drum also has more air space and stays open longer than a 1 kg pouch. Close the liner and note the date it was opened.

The fill follows 16.7%, not the grade

Every gram of salt carries about 167 mg of potassium whether it is powder or granulate. A 500 mg capsule therefore holds about 83 mg; a 1 g stick about 167 mg; a 2 g stick about 334 mg. To reach the 300 mg per portion that the EU source-of-potassium claim requires, the formula needs about 1.80 g of salt.

That number is the reason gluconate products are often larger than citrate products. The citrate monohydrate carries about 362 mg of potassium per gram, so the same 300 mg needs only about 830 mg of salt. The grade can improve how the gluconate fills; it cannot close that gap.

Tablet weight behaves the same way. A 1,000 mg tablet of this salt delivers about 167 mg of potassium, and a 1,500 mg tablet about 250 mg. A formulator can change the tablet weight, the units per serving or the salt, but not the percentage of potassium in the salt. This page recommends no intake; the arithmetic is what keeps the label and the fill consistent.

Specification lines that close the grade

  • “Potassium gluconate, CAS 299-27-4, C6H11KO7.”
  • “Assay 99.0–101.0% by titration, with the dried or as-is basis stated.”
  • “Potassium 16.0–17.0% by titration; report the method and the basis.”
  • “Loss on drying ≤1.0%; particle size ≥95% through 40 mesh.”
  • “Identification by infrared and titration; heavy metals and microbiology as listed.”
  • “Granulated or diluted variants are separate specifications with their own release limits.”

We supply the 40 mesh powder as the catalog item. A granulated or diluted grade is a different purchase with its own specification, and substituting it without a written change control and a label check would leave the certificate and the fill out of step.

When the granulated grade is wrong

For a stick that must dissolve quickly, coarse granules can leave a gritty residue and slow the dissolve. For a high-speed press, the standard powder may flow too poorly to run, and granulation is the practical answer. The grade should be chosen against the process, not against a general preference.

A diluted grade is a different decision: it lowers potassium per gram, so the fill must rise, and the carrier must be declared. It cannot make a small capsule carry a large potassium claim. If the claim needs more potassium in less powder, the salt has to change.

Catalog limits and the standard packs are on the product hub. The gluconate-versus-citrate comparison works through the potassium and fill arithmetic in full; the COA page shows where the assay and potassium figures sit; the MOQ page covers packs and lead time; the particle-size entry explains what a mesh result does and does not say.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation