Potassium gluconate: MOQ, pack sizes and ordering
Orders start at 1 kg in a foil pouch. Production volumes normally move to the 25 kg fiber drum, and the standard dispatch window is 1–7 days. A quotation becomes comparable only when it names the salt and CAS number, the specification and basis, the pack and quantity, the destination and Incoterm, the documents and the intended route.
One kilogram is the minimum because it is the smallest pack that carries a lot code and a retained sample, and it holds enough salt for about two thousand 500 mg capsules.
How the 1 kg floor is set
A kilogram is a practical unit rather than a round number. It carries about 167 g of potassium, which is 2,000 capsules at a 500 mg fill or ten 100 g pilot blends. It is also small enough to ship as a parcel and to keep as a retained sample after the trial.
A 10,000-capsule pilot at the same fill needs 5 kg, so the buyer either takes five pouches from one lot or splits a drum. Below 1 kg the material is usually repacked from a larger lot, which adds a handling step and a new traceability record; the salt is unchanged, but the pack's identity is not.
The drum lowers the handling cost per kilogram and raises the storage commitment. For a hygroscopic salt the trade-off is real: a drum opened many times over a year is a different storage proposition from a pouch used in a week.
Packs and what they are for
| Pack | Net weight | Typical use | Notes |
|---|---|---|---|
| Foil pouch | 1 kg | Trial, sample, small batch | Water-vapour barrier; close it after use |
| Fiber drum | 25 kg | Production | Liner inside; same lot code on drum and liner |
| Granulated powder | On request | Tablet flow and dust control | Separate specification and lead time |
| Diluted grade | On request | Lower potassium per gram | Carrier and label change |
The catalog item is a 40 mesh powder. Granulation and dilution are separate specifications with their own minimum and lead time, because they are made to order. Ask for the minimum with the grade, not after it.
From confirmation to dispatch
The 1–7 day window covers picking, documentation and handover to the carrier. Transit, customs and the customer's quality release sit outside it. A non-standard granulation or pack adds time, and the quotation should show that separately.
Ask for a dispatch date as well as a lead time. A drum travels on a pallet, a pouch travels as a parcel, and the Incoterm decides who books the freight and clears the entry. Documents should accompany the lot.
Six details that make a quote firm
- Salt and CAS. Potassium gluconate, 299-27-4, spelled out.
- Specification. Assay and basis, potassium, water, mesh, contaminants.
- Quantity and pack. 1 kg pouch, 25 kg drum, granulated or diluted.
- Destination and Incoterm. Country, port or address, trade term.
- Documents. COA, specification, SDS and any market statement.
- Route and market. Supplement, additive or other use, and where it will be sold.
Without the route and the market, a quotation is a price for a powder rather than an offer for a use. Commercial terms are on the quotation, not on this page.
What the sample has to prove
The 1 kg pouch is the qualification unit. Test identity, assay, potassium, water and microbiology, and keep a retained sample from the same pack. The lot code on the pouch, the COA and the quotation should agree; a sample without a lot code is a demonstration.
If a bench trial needs less than a kilogram, ask first. A split is a repack with its own record, and it may not come from the same lot as the production drum.
Quality terms worth settling early
The quality schedule should cover which specification revision applies, what each lot's certificate must show, how long a sample is kept, when the retest falls due and how a change is notified. A quality agreement is easier to negotiate before the first production order than after a disputed result.
Decide how a failing lot will be handled: joint re-test on the retained sample, an agreed referee laboratory, and who pays. A photograph of the powder is not a test result.
Catalog limits are published on the product hub; the release tests are listed on the COA page; the market files are on the compliance page; the term is defined in the MOQ glossary entry; and shipping is covered on the logistics page.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation