04 MOQ & ordering

Magnesium sulfate: MOQ, packaging and ordering

Technical document 04 · Reviewed 2026-11-19 · Magnesium Sulfate

On this page
  1. Why the minimum is one pouch
  2. Packs and formats
  3. Lead time and dispatch
  4. What a quotation needs
  5. The sample is a lot
  6. Terms to settle before the first order

Magnesium sulfate heptahydrate ships from a 1 kg foil pouch, and the production pack is a 25 kg fiber drum. Standard 40 mesh powder leaves in 1–7 days; crystals are quoted as a separate line. A quotation is only comparable when it names the hydrate, the water range, the mesh and the destination.

In one line

The 1 kg pouch exists for trials and retained samples; the 25 kg drum is the production pack, and the heptahydrate's water content makes pack integrity part of the order.

Why the minimum is one pouch

The minimum is one pouch, not one kilogram of magnesium. A 1 kg pack carries about 99 g of elemental magnesium, which is enough for a bench trial, a retained sample and an independent check of the water, magnesium and sulfate identity. It is also the smallest unit with its own lot code and certificate. A smaller quantity is normally a split from a larger lot, and the split loses the direct link between the sample and the drum.

The drum is the production unit: 25 kg, or about 2.47 kg of magnesium. It is not a trial size, and it commits storage space and a storage period. The heptahydrate is more than half water by mass, so the freight and the warehouse footprint per kilogram of magnesium are larger than for a concentrated salt. Ordering the drum before the hydrate and the mesh are fixed is a commitment to a specification that may still change.

The MOQ is therefore a released-lot decision. It is the smallest quantity that can be sampled, tested and traced as one lot, not a volume target or a commercial incentive.

Packs and formats

Magnesium sulfate packs and what each one needs
PackNet weightUseWhat to watch
Foil pouch1 kgTrial, retained sample, small batchReseal; lot code on the pouch
Fiber drum25 kgProductionInner liner; lot code on drum and liner
Powder, 40 mesh1 kg or 25 kgCapsules, sticks, blendsStandard catalog format
CrystalsOn requestHandling and dissolutionSeparate particle specification
GranulatedOn requestFlow and dust controlBulk density and mesh change

The foil and the drum liner are moisture barriers, and the seal and the liner closure are the weak points. The heptahydrate is efflorescent: a pack that exchanges air with a dry, warm store can lose water and fail the 48.0% floor. A pouch that has been opened and folded over is not a sealed pack, and the drum liner should be closed after every sample.

Crystal form, mesh and granulation are specification lines, not packing choices. A coarser crystal dissolves more slowly and makes less dust; a finer powder blends more evenly and dissolves faster. If the process needs a different mesh, say so before the quotation, because the change moves the particle-size line and the lead time.

Lead time and dispatch

Standard powder is quoted at 1–7 days from order confirmation. That covers picking, paperwork and dispatch; it does not cover the sea or air transit, customs clearance or the customer's own quality release. A custom crystal size, a granulation or a non-standard pack adds time and should be quoted as a separate item.

Ask for a dispatch date, not only a lead time. A drum may travel on a pallet and a pouch as a parcel; the Incoterm decides who books the freight and who clears the entry. The certificate, the packing list and the lot label should travel with the material. If the certificate follows later, the warehouse is holding a drum it cannot release.

What a quotation needs

A comparable quotation carries six fields:

  1. Hydrate and CAS. Magnesium sulfate heptahydrate, CAS 10034-99-8. “Epsom salt” is a common name, not a specification.
  2. Specification. Assay, magnesium, water by Karl Fischer, identification, mesh, heavy metals and microbiology.
  3. Quantity and pack. 1 kg pouch, 25 kg drum, crystals or a granulated variant.
  4. Destination and Incoterm. Country, port or address, and the trade term.
  5. Documents. COA, TDS, SDS, allergen, GMO, origin and processing-aid statements.
  6. Use and market. Supplement, food or another use, and where the finished product will be sold.

A quote that says “magnesium sulfate” and gives a magnesium percentage but no hydrate or water range is not comparable with a heptahydrate quote. The water range is what separates the heptahydrate from the monohydrate and the anhydrous salt. Commercial terms are stated in the quotation, not on this page.

The sample is a lot

The pouch is a lot sample, not a demonstration. Test water first, because it is the result most affected by sample handling: seal the subsample, run Karl Fischer and compare it with 48.0–52.0%. Then test magnesium, sulfate identity, chloride where relevant and microbiology. Keep a retained sample from the same pouch, and make the lot code on the sample, the certificate and the quotation agree.

A bench trial that needs less than a kilogram should be discussed before ordering. A split from a bulk lot is a repack with its own traceability, and it may not come from the same lot as the production drum. Label it as a repack, and do not read its certificate as the drum's certificate.

Terms to settle before the first order

The commercial terms are in the quotation: the Incoterm, the pack, the lead time and the documents. The quality terms sit beside them: the specification revision, the COA per lot, the retained sample, the retest period and the change-control route for the hydrate, the mesh and the pack. A written quality agreement before the first production order is easier than a dispute after it.

Returns and replacements follow the quotation and the quality agreement. A lot that misses the agreed specification should be handled on the retained sample with a joint re-test, not on a photograph. Agree which laboratory is acceptable to both sides and who commissions the referee test.

The product hub carries the catalog specification; the COA page lists the release tests; the grade page explains the hydrate choice; the stability page covers water in storage; the quality page describes the release and retained-sample record.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation