05 Compliance

The regulatory file for magnesium sulfate

Technical document 05 · Reviewed 2026-11-19 · Magnesium Sulfate

On this page
  1. What the file contains
  2. European Union
  3. United States
  4. Contaminants and limits
  5. Label and claims
  6. Documents in the file
  7. Checklist before the first order

Magnesium sulfate heptahydrate sits at the intersection of two regulatory routes: a magnesium source for food supplements and a food additive with its own identity. The file has to name the exact hydrate, the destination and the finished-product dose, and the buyer's regulatory team confirms which route covers the product. This page lists the documents and checks that belong in that file, so the specification and the commercial pack can be reviewed together.

In one line

The specification describes the heptahydrate; the regulatory file shows the route, the limits and the label for the destination.

What the file contains

A complete file answers four practical questions. What is the material, and which specification version is being bought? Which lot is being released, and what does its certificate report? Which route, limits and label rules apply in the destination? And what changes if the source, the process or the pack changes? The technical data sheet answers the specification question, the certificate answers the lot question, and the safety data sheet answers the handling question. None of them answers the route question on its own.

The file should also carry the allergen and GMO statements, the origin record, the processing-aid statement and any customer-specific declaration. For an inorganic salt the list is shorter, but the hydrate, the particle form and the pack are still part of what is placed on the market. Where a statement is missing, name the gap before the order rather than discovering it at the port.

Each document should carry a date and a revision, and the specification, quotation and certificate should refer to the same version; undated PDFs are not a controlled file.

European Union

The EU file is built from the specification, the contaminant results and the label. Magnesium sulfate has an additive identity, E518, and the mineral-source route for food supplements is a separate framework; the two are not interchangeable, and neither is a conclusion for a particular finished product. The buyer's regulatory team confirms which entry covers the exact hydrate, the use level and the destination member state, using the current consolidated text as of this review.

General food law, labelling and contaminant rules apply alongside the product-specific route. The label should name the salt in the form the destination requires, and the nutrition declaration should state elemental magnesium rather than the heptahydrate mass. The word “magnesium sulfate” can describe the heptahydrate or a dried salt, so the hydrate should be written into the specification and the label.

Check the current text before relying on any summary, including this page. The EU lists and the labelling rules can change, and a file built on an old summary is a file that has not been checked.

United States

The US file is built around the dietary-ingredient basis the supplier relies on and the intended use in the finished supplement. The buyer confirms that the basis covers the product, the dose and the label. A conventional-food use and a supplement use are different files even when the material is the same; the route, the labelling and the claim review change with the category.

The Supplement Facts panel names the dietary ingredient and declares elemental magnesium. “Magnesium sulfate” alone may be ambiguous if the hydrate is not named, and a panel built on the anhydrous salt cannot be filled with the heptahydrate without recalculating the magnesium. The certificate supports the lot; it does not establish the regulatory route.

The US file also needs the facility and supplier information the buyer's quality team requires, the allergen and GMO statements, and the heavy-metal and microbiology results for the lot. The buyer's regulatory reviewer confirms the label and the claim separately from the certificate.

Contaminants and limits

The contaminant panel is a finished-product calculation, not only a drum result. The table below is a usual starting point for a food-supplement file; the current destination text and the daily dose decide the final limit.

Contaminant limits to confirm for the finished product
ParameterTypical supplement referenceWhat the file should show
Lead (Pb)3.0 mg/kg in the supplementLot result, method, limit and the finished-product calculation
Cadmium (Cd)1.0 mg/kg in the supplementLot result and any category exception that applies
Mercury (Hg)0.10 mg/kg in the supplementLot result and method
Arsenic (As)Customer or market limitThe agreed limit and the method, stated on the certificate

The water limit is a specification line, not a contaminant. The heptahydrate is supposed to carry 48.0–52.0% water; a “moisture” result below that range is a hydrate change, while a result above it can mean free water or a wet liner. The certificate should call the test water by Karl Fischer and report it against the hydrate range.

The finished-product arithmetic is worth doing before the first order. At a 2 g stick, a lead result of 3.0 mg/kg in the ingredient contributes about 6 µg of lead per serving, before any other ingredient is counted. The file should show that calculation against the limit for the supplement as consumed, not only the drum result.

Label and claims

The label names the material, the elemental magnesium quantity and the source in the form the destination requires. In the EU, a magnesium claim from the permitted list is available only when the finished product meets the conditions for a significant amount, and the claim is about magnesium, not about the sulfate. The claim review is separate from the specification and from the certificate.

In the US, a structure/function statement carries the required disclaimer; in the EU, the claim must be on the permitted list and meet its conditions. No therapeutic, curative or preventative claim belongs on the page or the label.

Do not use the product page as a label or a claim. The finished product's status is a separate legal question, and the buyer's regulatory reviewer signs it off for the destination.

Documents in the file

  • Specification with the hydrate, the assay, the magnesium and water ranges, the particle form and the pack.
  • Batch COA with the methods, the release limits and the measured results.
  • Technical data sheet and safety data sheet.
  • Allergen, GMO, origin and processing-aid statements.
  • Heavy-metal and microbiology results, with the method and the detection limit.
  • Packaging declaration and the lot code that links the pack to the certificate.
  • The destination route, the label review and the claim review, held by the buyer's team.

Checklist before the first order

  1. Is the exact hydrate, its CAS number and the particle form named in the specification?
  2. Do the assay, magnesium and water results describe the same lot and the same basis?
  3. Is the destination route confirmed by the buyer's regulatory team, as of this review?
  4. Do the contaminant results fit the finished-product limit at the real dose?
  5. Does the label name the salt and declare elemental magnesium correctly?
  6. Are the source, process, particle form and pack under change control?

The product hub carries the catalog specification; the COA page explains the lot certificate; the identity page covers the sulfate and water evidence; the EU regulatory note gives the framework references; the quality page describes the release file.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation