04 MOQ & ordering

Anhydrous magnesium sulfate: MOQ, packs and ordering

Technical document 04 · Reviewed 2026-11-20 · Magnesium Sulfate Anhydrous

On this page
  1. Why the minimum is one pouch
  2. Packs and formats
  3. Lead time and dispatch
  4. What a quotation needs
  5. The sample is a lot
  6. Terms to settle before the first order

The minimum order is 1 kg, supplied in a foil pouch; production ships in a 25 kg fiber drum, and the standard powder leaves in 1–7 days. A quotation needs the form (anhydrous, CAS 7487-88-9), the magnesium and loss-on-drying limits, the mesh, the pack and the destination.

In one line

A one-kilogram foil pouch is the smallest released lot we can sample, test and trace, and for a hygroscopic salt the pack is part of the specification.

Why the minimum is one pouch

A kilogram of the anhydrous salt carries about 190–205 g of elemental magnesium, depending on where the lot sits in the 19.0–20.5% range. That is enough for a bench trial, a retained sample and an independent check of the magnesium, sulfate and drying results. It is also the smallest unit with its own lot code and certificate, which is the part that matters when a trial result has to be traced back to the powder that produced it.

A smaller quantity is normally a split from a larger lot. The split adds handling, creates a second container and breaks the direct link between the sample and the drum it came from. For a hygroscopic material the handling is not neutral: every transfer exposes the powder to air, and the split container may carry a different moisture history from the parent pack.

The 25 kg drum is the production unit, carrying roughly 4.75–5.1 kg of magnesium. It reduces handling per kilogram, but it also commits storage space and an in-use period. Once the liner is opened, the drum is on the clock, and the remaining powder has to be protected between samples. The minimum is a released-lot decision, not a volume incentive.

Packs and formats

Anhydrous magnesium sulfate packs and what each one needs
PackNet weightTypical useWhat to watch
Foil pouch1 kgTrial, retained sample, small batchReseal after opening; lot code on the pouch
Fiber drum25 kgProductionInner liner; close after every sample
Granulated form1 kg or 25 kgFlow and dust controlSeparate particle specification
Split packOn requestBench trial below 1 kgRepack record; new lot identity

The foil is the moisture barrier and the seal is the weak point. A pouch that has been opened and folded over is not resealed in the same sense as a heat-sealed pack; the headspace now holds room air, and the powder at the surface starts to take water. For a long in-use period, transfer the remainder to a smaller dry container or use the pouch within the stated period.

The drum relies on its inner liner. Keep the liner closed and tied between samples, stand the drum on a pallet rather than a concrete floor, and write the opening date on the label. A desiccant can help inside a secondary container, but it is not a substitute for a closed liner, and it should not be in direct contact with the powder unless the pack design says so.

Lead time and dispatch

The standard pack is quoted at 1–7 days from order confirmation. That window covers picking, document preparation and dispatch; it does not include the sea or air transit, customs clearance or the customer's own quality release. A granulation or a non-standard pack is a separate line and adds time, which the quotation should state rather than fold into the standard range.

Ask for a dispatch date, not only a lead-time range. A 1 kg pouch usually moves as a parcel, while the 25 kg drum travels on a pallet; the Incoterm decides who books the freight and who clears entry. The certificate, packing list and lot label should travel with the material. If the certificate follows later, the warehouse is holding a drum it cannot release.

What a quotation needs

A comparable quotation answers six questions:

  1. Product and form. Magnesium sulfate anhydrous, CAS 7487-88-9, MgSO4. “Magnesium sulfate” alone is ambiguous.
  2. Specification. Magnesium range, loss on drying, sulfate identity, mesh, heavy metals and microbiology.
  3. Quantity and pack. 1 kg pouch, 25 kg drum, or a granulated variant.
  4. Destination and Incoterm. Country, port or address, and the trade term.
  5. Documents. COA, TDS, SDS, allergen, GMO, origin and the statements the importer needs.
  6. Use and market. Supplement, food or another use, and where the finished product will be sold.

A quotation that gives a magnesium percentage but no drying limit cannot be compared with an anhydrous quotation, because the two offers may describe different water contents. A quotation that gives a mesh but no particle-form statement is similarly incomplete. Commercial terms are stated in the quotation, not on this page.

The sample is a lot

The pouch is a lot sample, not a demonstration. Test loss on drying first, because it is the result most affected by handling: take a sealed subsample, weigh it quickly or in a controlled-humidity box, and compare the result with the ≤1.0% limit. Then test magnesium, sulfate identity, heavy metals and microbiology. Keep a retained sample from the same pouch, and make the lot code on the sample, the certificate and the quotation agree.

A sample left open during weighing reads wetter than the pack. That is a handling artefact, not necessarily a batch failure, and it is hard to argue after the fact. Record the time between opening and weighing, and keep the subsample sealed until the balance is ready. If a result is disputed, the retained sample is the referee, not the powder on the bench.

If the bench trial needs less than a kilogram, discuss it before ordering. A split is a repack: it carries its own handling record and may not share a lot with the production drum. Say so on the label, and keep its certificate separate from the drum's.

Terms to settle before the first order

Put the commercial and quality terms in one document: Incoterm, pack, dispatch window, specification revision, the COA per lot, the retained sample, the retest period, and the change-control route for particle form, pack and source. A quality agreement signed before the first production order is easier than the same discussion after a dispute.

Returns and replacements follow the quotation and the agreement. A lot that misses the agreed specification should be handled on the retained sample with a joint re-test against the named method, not on a photograph of the drum. Agree which laboratory both sides accept and who commissions the referee test before the material ships.

The product hub carries the catalog specification; the COA page lists the release tests; the stability page covers water uptake in storage; the MOQ glossary entry defines the term; the quality page describes the release and retained-sample record.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation