05 Compliance

The regulatory file for anhydrous magnesium sulfate

Technical document 05 · Reviewed 2026-11-20 · Magnesium Sulfate Anhydrous

On this page
  1. What the file contains
  2. European Union
  3. United States
  4. Contaminants and limits
  5. Label and claims
  6. Documents in the file
  7. Checklist before the first order

Anhydrous magnesium sulfate is a magnesium source, and the file answers four separate questions: whether the form is permitted, which contaminants apply, how the label reads and whether a claim is open. In the EU, magnesium sulphate is listed in Annex II to Directive 2002/46/EC as a permitted supplement form; in the US, 21 CFR 184.1443 affirms magnesium sulfate as GRAS. The buyer's regulatory team confirms the route for the exact material, the dose and the destination.

In one line

Anhydrous magnesium sulfate is a permitted magnesium source in the EU and a GRAS food ingredient in the US, but the hydrate, the route and the label still have to be checked for the destination.

What the file contains

The file holds four things: the specification version for the anhydrous salt, the certificate that releases the lot, the destination route with its limits and label rules, and the change-control record for source, particle form and pack. The technical data sheet answers the specification question, the certificate the lot question and the safety data sheet the handling question. None settles the route alone.

“Anhydrous” is part of the identity, not a marketing adjective. A file built around a heptahydrate certificate does not cover a powder sold as anhydrous, even when both are magnesium sulfate and both are food grade. The specification, the certificate and the label have to name the same form, the same CAS number and the same drying limit.

The destination decides which framework applies. Great Britain uses the GB register and GB labelling, while Northern Ireland follows the EU framework; the delivery address, not the buyer's headquarters, decides which one is in play. Record that decision with the order so the label and the citation can be checked later.

European Union

Directive 2002/46/EC sets the food-supplement framework, and Annex II lists magnesium sulphate among the permitted forms of magnesium. That listing is the starting point: Regulation (EU) No 1169/2011 governs labelling, Regulation (EU) 2023/915 the contaminants and Regulation (EC) No 1924/2006 the claims. Check the current consolidated text.

The additive route is separate. Magnesium sulfate has an additive identity, E518, with a monograph in Commission Regulation (EU) No 231/2012. That monograph is written around a defined magnesium sulfate specification, and it should not be assumed to describe the anhydrous powder without checking the current entry. The buyer's team decides whether the supplement route, the additive route or both cover the intended use.

On the label, the ingredient should be named in the form the file covers, and the nutrition declaration states elemental magnesium rather than the salt mass. A label that says “magnesium sulfate” without a form can be ambiguous when the file, the certificate and the weigh-up refer to the anhydrous salt.

United States

21 CFR 184.1443 affirms magnesium sulfate as GRAS for direct addition to food under current good manufacturing practice. A dietary supplement is also a dietary-ingredient question under DSHEA, and the Supplement Facts panel under 21 CFR 101.36 declares elemental magnesium against the current Daily Value, 420 mg for adults and children four years and older as of this review.

A GRAS affirmation for food use does not, by itself, write the Supplement Facts panel or settle a structure/function claim. The buyer's regulatory reviewer confirms that the ingredient basis extends to the finished product, the dose and the label.

A structure/function statement needs substantiation and the DSHEA disclaimer. No disease-related claim is open in either market, and a magnesium claim is about the nutrient, not about the sulfate. The label reviewer signs that off separately from the certificate.

Contaminants and limits

Contaminant results are read at the finished-product dose, not only at the drum. The table below is a working reference for a supplement file; the destination's current text and the real daily intake decide the final limit.

Contaminant checks for the anhydrous magnesium sulfate file
ParameterTypical supplement referenceWhat the file should show
Lead (Pb)3.0 mg/kg in the supplementLot result, method, limit and the finished-product calculation
Cadmium (Cd)1.0 mg/kg in the supplementLot result and any category exception that applies
Mercury (Hg)0.10 mg/kg in the supplementLot result and method
Arsenic (As)Customer or market limitThe agreed limit and the method, stated on the certificate

The finished-product arithmetic is worth doing before the first order. A 1 g capsule made from an ingredient at 3.0 mg/kg lead carries about 3 µg of lead before any other component is counted; a two-capsule serving doubles that. The file should show the calculation against the limit for the supplement as consumed, not only the drum result.

Loss on drying is not a contaminant. It is the line that supports the word anhydrous, and a lot above 1.0% is a specification failure even when every metal result is clean. Sulfate is the anion, not an impurity; a sulfate figure is part of the identity and the mass balance.

Label and claims

In the EU, a magnesium claim from the permitted list is available only when the finished product meets the conditions attached to it, including a significant amount of magnesium per daily portion. The claim is about the nutrient, not the sulfate, and the label calculation has to support it.

In the US, a structure/function statement needs substantiation and the DSHEA disclaimer, and the Supplement Facts panel must declare the elemental magnesium correctly. No therapeutic, curative or preventative claim belongs on the page or the label. This site publishes the specification and makes no health claim.

If the label uses the word “anhydrous”, the certificate has to support it with a loss-on-drying result inside the limit. If the label names the heptahydrate, the anhydrous certificate is the wrong document.

Documents in the file

  • Specification naming the anhydrous salt, CAS 7487-88-9, magnesium range, loss on drying, mesh and pack.
  • Batch COA with methods, release limits and measured results for the same lot.
  • Technical data sheet and safety data sheet.
  • Allergen, GMO, origin and processing-aid statements.
  • Heavy-metal and microbiology results, with the method and detection limit.
  • Packaging declaration and the lot code that links the pack to the certificate.
  • The destination route, label review and claim review, held by the buyer's team.

Start from the catalog entry, then attach the lot certificate. The COA page explains the certificate structure, the identity page the analytical evidence, the EU regulatory note the framework references and the quality page the release record.

Checklist before the first order

  1. Is the exact form, CAS number, drying limit and particle form named in the specification?
  2. Do the magnesium, loss-on-drying and sulfate results describe the same lot and the same basis?
  3. Is the destination route confirmed by the buyer's regulatory team, as of this review?
  4. Do the contaminant results fit the finished-product limit at the real dose?
  5. Does the label name the anhydrous salt and declare elemental magnesium correctly?
  6. Are the source, process, particle form and pack under change control?

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation