05 Compliance

The regulatory file for magnesium oxide

Technical document 05 · Reviewed 2026-11-19 · Magnesium Oxide

On this page
  1. What the file contains
  2. European Union
  3. United States
  4. Contaminants and the finished-product calculation
  5. Claims and the label
  6. Documents the file needs
  7. Checklist before the first order

Magnesium oxide is supplied as MgO, CAS 1309-48-4. The catalog specification is the starting point; the regulatory file is built around the exact grade, the destination and the finished-product route. This page lists the instruments, limits and documents that belong in that file. The buyer's regulatory team confirms the route for the destination before the label or the claim is fixed.

In one line

The specification describes the material; the regulatory file shows the destination route, the contaminant calculation and the label, and the buyer's team confirms it.

What the file contains

The file answers four questions. What is the material, and which specification version is being bought? Which lot is being released, and what does its certificate report? Which limits and label rules apply to the finished product? And what changes if the source, the calcination route or the pack changes? The COA answers the lot question, the TDS the specification and the SDS the handling; none answers the route question alone.

The file should also contain the origin record, allergen and GMO statements, the residual-solvent statement and any customer declaration. Magnesium oxide is an inorganic mineral, so several of those statements are short; they still belong in the file, dated and versioned. A document list with revision numbers is more useful than a folder of undated PDFs.

The grade belongs in the regulatory description as well as the commercial one. A dead-burned oxide and a precipitated oxide share a CAS number and a formula, but they are not the same material for a supplement file. Name the source and calcination route in the specification and hold them under change control.

European Union

First check Directive 2002/46/EC on food supplements. Annex II is where the permitted forms of vitamins and minerals are listed; the buyer's regulatory team confirms the current entry for magnesium oxide and the conditions that apply to the finished product. The directive sits alongside general food law, labelling and contaminant rules; the current consolidated text is the reference, not a summary.

Magnesium oxide also has a food-additive entry, E 530, under Regulation (EC) No 1333/2008. The additive and food-supplement routes are separate: an additive use in one food category is not automatically covered by a supplement file in another. The buyer's team confirms which route the finished product uses and whether the grade and the use level fit it.

Labelling follows Regulation (EU) No 1169/2011 and the supplement-specific rules; claims follow Regulation (EC) No 1924/2006. The nutrition declaration, the source name and the elemental magnesium figure have to agree with the certificate and with the dose per portion. A change of grade can change the particle size and the fill without changing the label, but a change from oxide to carbonate changes the label line.

United States

The US route for a dietary supplement is the dietary-supplement framework, with current good manufacturing practice under 21 CFR Part 111 and the Supplement Facts panel under 21 CFR 101.36. The supplier should be able to name the basis it relies on for the ingredient and point to the supporting document. The buyer confirms that the basis covers the finished product and the intended use.

This page does not assert a GRAS or grandfathered basis for magnesium oxide, and it does not read a food-additive listing as a supplement authorisation. The routes are different; the basis belongs in the supplier's file, not a catalogue description. If a specific basis is documented for the grade, it should be stated in the specification and reviewed for the destination.

The US Daily Value for magnesium is 420 mg, and the tolerable upper intake level for supplemental magnesium is 350 mg/day for adults. They are used for the label and the finished-product check; they are not targets and do not replace the destination's rules.

Contaminants and the finished-product calculation

The contaminant panel is a finished-product calculation, not only a drum result. The table below is the starting point for a food-supplement file; the current destination text and the daily dose decide the final limit. The certificate should report a measured figure per element, with the method.

Contaminant limits to confirm for the finished product
ParameterTypical supplement referenceWhat the file should show
Lead (Pb)3.0 mg/kg in the supplementLot result, method and the finished-product calculation
Cadmium (Cd)1.0 mg/kg in the supplementLot result and any category exception that applies
Mercury (Hg)0.10 mg/kg in the supplementLot result and method
Arsenic (As)Customer or market limitThe agreed limit and the method, stated on the certificate

The EU figures come from Regulation (EU) 2023/915; the US has no single harmonised set for all supplements, so the customer limit and state or federal rules have to be checked. The calculation uses the ingredient in the daily serving, not the drum. A lot that passes the drum limit can still fail the finished-product calculation if the dose is high.

Do the arithmetic before the label is written. A 500 mg magnesium oxide capsule at the catalog floor of 57.0% Mg delivers 285 mg of elemental magnesium. The EU tolerable upper intake level for supplemental magnesium is 250 mg/day for readily dissociable magnesium salts, and the US level is 350 mg/day for supplemental magnesium. Whether a given oxide grade falls inside the EU category is part of the destination review; the calculation itself is not optional.

Claims and the label

The label names the material, the amount of elemental magnesium and the source in the form the destination requires. The claim review is separate. The EU claims register contains authorised magnesium nutrient-function claims, but use depends on the dose per portion, the food category and the exact wording. The brand's regulatory reviewer confirms that wording for the finished product; this page does not approve or repeat a claim.

No disease-related claim is made for magnesium oxide here. A certificate does not approve a claim, and a claim does not change the specification. The label and the certificate should use the same ingredient name, elemental figure and basis.

Documents the file needs

  • Specification with the revision, the source and the calcination route named.
  • Batch COA with assay, magnesium, loss on drying, acid-insoluble matter, contaminants and microbiology.
  • Technical data sheet and safety data sheet for the grade.
  • Particle-size and bulk-density data on the qualification sample.
  • Origin record and a statement that the material is mineral in origin.
  • Allergen and GMO statements, including a statement that no organic solvent is used.
  • Packaging declaration and the change-control route for source, route and pack.

Checklist before the first order

  • Specification version, CAS number and grade are named.
  • COA, TDS, SDS, origin, allergen and GMO statements are on file.
  • The contaminant results are converted to the finished-product dose.
  • The label and the claim have been reviewed for the destination.
  • The source, calcination route and pack are under change control.
  • The quotation, the specification and the certificate refer to the same version.

The product hub carries the catalog specification. The COA page explains the lot certificate; the identity page covers the analytical evidence; the ICP-MS method note describes the contaminant panel; the EU regulatory note gives the framework references; the quality page describes the release file.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation