Magnesium oxide: MOQ, packaging and ordering
The MOQ for magnesium oxide is 1 kg, supplied as a 1 kg foil pouch; the standard bulk pack is a 25 kg fiber drum. Lead time is 1–7 days for the standard pack. A firm quotation needs six pieces of information: the grade and source, the assay basis and magnesium figure, the quantity and pack, the destination and Incoterm, the documents, and the intended use and market.
One kilogram is the smallest pack that can be sampled, tested and traced as a lot; the 25 kg drum is a production unit, not a volume incentive.
Why the minimum is 1 kg
A 1 kg pack covers a bench-scale trial, a retained sample and an independent identity test. It is also small enough to ship as a parcel, which matters when a formulator needs material before the production plan is fixed. The pack is a commercial unit with a lot code, not a scoop from a bulk drum.
Below 1 kg, the material is usually split from a larger lot and repacked. That adds handling, loses the original pack identity and makes traceability harder, without changing the chemistry. The 25 kg drum is the bulk unit: it reduces handling per kilogram and commits inventory for a longer storage period. The minimum is a pack decision, not a volume test.
One kilogram is a useful trial quantity for either grade, but the grade matters more than the weight. A light, precipitated oxide at low bulk density delivers less mass per capsule than a dense, ground oxide, so a kilogram fills more capsules. The trial should use the grade that the production order will use, or the fill result will not transfer.
Packs and formats
| Pack | Net weight | Typical use | Notes |
|---|---|---|---|
| Foil pouch | 1 kg | Trial, sample, small batch | Moisture barrier; reseal after opening; lot code on the pouch |
| Fiber drum | 25 kg | Production | Inner liner; keep the liner closed; lot code on drum and liner |
| Granulated powder | On request | Flow and dust control | Binder and particle profile change; acid reaction may slow |
| Split pack | On request | Bench trial | Repack from a bulk lot; document the new pack identity |
The catalog form is a 40 mesh powder: ≥95% through 40 mesh. Granulation is a different physical specification, not a packing choice. If the filling line needs a free-flowing granule or the blend cannot tolerate dust, say so before the quotation, because the change moves the particle-size line, the bulk density and possibly the lead time.
The pack should match the storage plan. A 25 kg drum that will be opened repeatedly over months is a different risk from a 1 kg pouch used in one trial. If the drum will be opened in a humid room, ask for the liner specification and plan to use the contents within the agreed in-use period.
Lead time and dispatch
The standard pack is quoted at 1–7 days from order confirmation. That window covers picking, document preparation and dispatch; it does not include shipping transit, customs clearance or the customer's own quality release. A custom granulation, a split pack or a non-standard document set adds time, and the quotation should state it separately.
Confirm the magnesium oxide dispatch date at order; the 1–7 day lead time is a window rather than a date. One kilogram goes as a parcel and the drum as pallet freight; the Incoterm settles who arranges carriage and who clears customs. The COA and SDS should travel with the lot code so the receiving site can match the source and calcination route. A granulated or split pack is prepared separately, so its date may be later.
What a quotation needs
Six items make a quotation firm enough to compare:
- Product and grade. Magnesium oxide, CAS 1309-48-4, with the source and calcination route named.
- Specification. Assay and basis, magnesium figure, loss on drying, acid-insoluble matter, particle size and bulk density.
- Quantity and pack. 1 kg pouch, 25 kg drum, or a granulated or split variant.
- Destination and Incoterm. The country, the port or address, and the trade term.
- Documents. COA, specification, SDS, and any market-specific statement the importer needs.
- Intended use and market. Supplement, food or another use, and the market where it will be sold.
A quotation without the grade and the market is incomplete. The same formula can meet one destination's file and sit outside another's, and the source and calcination route are part of the offer. Commercial terms are stated on the quotation, not on this page.
The sample is a lot, not a demonstration
The 1 kg pack is the qualification sample. Test identity, assay, magnesium, loss on drying, acid-insoluble matter and microbiology before scaling, and keep a retained sample from the same pack. The lot code on the sample, the COA and the quotation should match. A sample that cannot be traced to a lot is a demonstration, not a qualification.
The sample should also be tested in the intended form. A capsule fill trial, a tablet compression trial or an acid-consumption check on the sample will show whether the grade fits the process. A certificate alone cannot show how the powder flows or how fast it reacts.
If the project needs less than 1 kg for a bench trial, discuss it before ordering. A split from a bulk lot is a repack with its own traceability, not the catalog pack, and it should be documented as such. Do not assume that a bench sample and the production drum will come from the same lot.
Terms to settle before the first order
Magnesium oxide offers are not comparable on the MgO percentage alone. The offer should state the delivery term, the shipping window and the pack, whether 1 kg pouch or 25 kg drum. Beside them go the revision in force, what each COA must report, the sample held on file and the retest point. Add the source and calcination route, because they set bulk density and acid reaction. A quality agreement covering the change-control route from light precipitated powder to granulated oxide is worth having before the first production run.
A magnesium oxide return turns on the grade and the test, not on the powder's colour. Keep the retained sample, re-test assay, magnesium, loss on drying and acid-insoluble matter together, and run the acid-consumption check on the same portion if flow or reactivity is the complaint. The source and calcination route decide how the lot behaves, so the claim should name them. The quotation and quality agreement are the place to fix the laboratory and the party that funds the referee test.
The product hub carries the catalog specification; the COA page lists the release tests; the compliance page covers the market files; the MOQ glossary entry defines the term; the quality page describes the release workflow.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation