What the COA for lithium orotate actually contains
A lithium orotate certificate has to hold two measurements together: the HPLC assay of the salt and the elemental lithium figure. The catalog releases a lot at 98.0–102.0% assay with lithium at 4.0–4.5%, against a theoretical 4.28% for the anhydrous salt. A certificate that reports only the assay has measured the organic part and left the counter-ion untested.
Two numbers carry the certificate: the HPLC assay says how much orotate salt is present, and the titrated lithium figure says that the salt is lithium orotate.
The certificate as a test report
A useful certificate can be audited line by line: each parameter says what was measured, how it was measured, and the limit the lot had to meet. A line that reads only “conforms” leaves the reader with the laboratory's opinion and no way to check it. For this salt the assay and the lithium values decide, together, whether the material is the right salt at all.
| Parameter | Method | Release limit |
|---|---|---|
| Appearance | Visual | White to off-white powder |
| Identification | IR, plus HPLC against a reference | Conforms to the reference |
| Assay, lithium orotate | HPLC | 98.0–102.0% |
| Lithium | Titration | 4.0–4.5% |
| Loss on drying | Gravimetric | ≤1.0% |
| Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg |
| Microbiology | Plate count, yeast and mould, absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent |
| Particle size | Sieve analysis | ≥95% through 40 mesh |
The lithium line belongs to this material alone. Orotic acid carries none of it, and lithium carbonate carries a great deal more, so the elemental figure is what separates the salt from its neighbours. Read it beside the assay, never in place of it.
The lithium figure, the assay basis and the arithmetic
The anhydrous salt is C5H3LiN2O4 with a molar mass of about 162.03 g/mol. Lithium accounts for 6.94 of those grams, which is 4.28% by mass, and the orotate part for the remaining 95.7%. That calculation anchors both assay rows: a 100% pure salt cannot report more than 4.28% lithium, and it cannot report less than about 4.24% while the loss on drying is inside 1.0%.
The two rows are on different bases unless the certificate says so. Assay is usually reported on the anhydrous basis, and the lithium figure is usually reported as received. On a lot with 0.8% loss on drying, 4.283% theoretical becomes 4.249% as received: a small shift, but it is the difference between a result that looks low and one that does not. The basis belongs in the row, not in a footnote.
The same arithmetic sets a floor. To pull the lithium figure down to 4.00% by water alone, the powder would have to hold about 6.6% moisture, which fails the 1.0% loss-on-drying limit by a wide margin. A credible lithium result at the bottom of the window, on a lot whose moisture passes, is therefore a question about the salt rather than about the drying. Ask for the titration volume, the sample weight and the method.
Release limit versus batch result
The limit is the gate the lot had to pass; the result is the number the bench actually produced. When the second column simply repeats the first, nothing has been reported.
| Parameter | Limit | Result, as it should read |
|---|---|---|
| Assay | 98.0–102.0%, basis stated | The measured figure plus the basis it was calculated on |
| Lithium | 4.0–4.5% | The measured figure, as received, and the method |
| Loss on drying | ≤1.0% | The measured figure |
| Heavy metals | Per element | One figure per element, in mg/kg |
| Microbiology | Counts and absence | The count and the absence wording, by lot |
A pass statement is a conclusion, and the reader should be able to rebuild it from the figures above. A heavy-metal total hides the element that matters, so each one needs its own line. Microbiology needs a count and an absence statement, both tied to the lot code.
What moves between batches
Crystallisation and drying are what move the lithium figure and the moisture, and they move them together. A batch dried harder loses water and reads a little higher on lithium as received; a batch dried less reads lower and shows the extra water on the loss-on-drying line. That is why the two figures have to be read as a pair. A lithium result that moves while the moisture does not is a change in the salt or in the assay, not in the drying.
The mill and the sieve decide the mesh, and they decide little else. Mesh is a finishing step: a new mill or a new screen moves the number while the molecule stays exactly the same. Colour is the least quantitative line and the most revealing: white to off-white is a wide window, and a batch that turns grey or yellow while the assay still passes points to a different drying step, a hold or a metal contact.
Read the series, not the single lot: lithium sliding towards the floor of the window, moisture creeping up, or an extra peak that was not there before all say more than one result next to an edge. Trace the code through as well; it must agree on the certificate, the pouch or drum, and the retained sample.
When an outside laboratory earns its fee
An independent test earns its fee at a new source, at a first shipment into a market where the route is still open, where a salt claim rests only on the supplier's own certificate, or where a result is contested. The panel is not a copy of the certificate: HPLC and IR for identity, lithium by a second technique such as ICP-OES, moisture, ICP-MS and microbiology.
Add X-ray diffraction if the question is whether the powder is one crystalline salt or a blend, and add a pH and effervescence check if a carbonate is suspected. Ask the laboratory to report its detection limit for each screen, because a “not detected” line without a limit says something about the method, not about the sample. Keep the chain tight: the powder that was tested should be the powder that was retained, and the report should carry the lot number.
What to compare between suppliers
Put six lines side by side: the exact salt and CAS number; assay with its basis; lithium with its basis and method; loss on drying; the heavy-metal and microbiology panels; the pack, code and retest period. If two offers agree on the assay and disagree on the lithium figure or on the basis, they are offers for two different powders.
The catalog limits sit on the lithium orotate product page. The tests that separate the salt from a blend are on the identity page; the salt comparison behind the label is on the orotate versus carbonate page; the procedures are collected in the methods library; the release workflow is on the quality page. The same certificate logic applies to the magnesium salt of the same acid, where the element and the hydrate carry the risk instead.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation