05 Compliance

The regulatory file for ferrous bisglycinate

Technical document 05 · Reviewed 2026-11-19 · Iron Bisglycinate

On this page
  1. What the file contains
  2. European Union
  3. United States
  4. Contaminants and the finished dose
  5. Claims and the label
  6. Documents in the file
  7. Before the first order

Ferrous bisglycinate is supplied as an iron source for food supplements, and whether it may be used in a destination, at what dose and with what label is a route question that the buyer's regulatory team confirms. The supplier's file carries the specification, the lot certificate, the identity evidence and the contaminant results; the buyer supplies the destination route, the finished dose and the label review. This page sets out what belongs in that file and where the framework sits; it is not a permission for any market.

In one line

The specification describes the chelate; the destination file has to prove the route, the limits and the label, and that call belongs to the buyer's team.

What the file contains

Four questions organise the file. Which material and specification revision is on the purchase order? Which lot was released, and what did its certificate measure? Which route, limit and label rule applies in the destination? And what happens to the approval when the supplier, the manufacturing route or the packaging is changed?

The route question is the one a supplier cannot answer for the buyer. An iron source added to a food and an iron source in a supplement are built under different rules — the supplement route and the food-additive route are separate files — and a form accepted in one route is not automatically accepted in the other. For Great Britain, the GB register and GB labelling rules apply; Northern Ireland follows the EU rules, and the buyer's team confirms which file is the right one and keeps the evidence with the order.

European Union

Directive 2002/46/EC sets the framework for food supplements, including the lists of vitamin and mineral substances and the forms in which they may be used. The exact iron form has to be matched to the current list and to the member state's implementation; that match is a regulatory check, not a label wording choice. General food law, the food-information rules and the contaminant regulation apply alongside it.

Regulation (EU) No 1169/2011 governs the nutrition declaration, where iron is declared in mg against a reference intake of 14 mg. Regulation (EC) No 1924/2006 governs claims, and Regulation (EU) 2023/915 governs contaminants. As of this review, those are the instruments to check; the current consolidated text is the reference, and the buyer confirms the version in force at the destination.

United States

A dietary supplement is regulated under the DSHEA framework, with the finished product made under the dietary-supplement cGMPs of 21 CFR 111 and labelled under 21 CFR 101. Iron is declared in the Supplement Facts panel in mg and as a percentage of the 18 mg Daily Value, while the ingredient list names the form. The buyer confirms the ingredient basis for the exact chelate and the finished product's compliance with the labelling and manufacturing rules.

Iron-containing dietary supplements also carry the accidental-overdose warning required by 21 CFR 101.17(e): the finished label warns about overdose in young children and gives a poison-control instruction. That warning is a finished-product obligation, not a line on the bulk certificate, and it should be part of the label review before the first print run.

Contaminants and the finished dose

The panel has to be worked out at the finished-product level, not just measured on the drum. The table gives a starting point for a supplement file; the destination text in force and the daily dose set the final figure.

Contaminant limits for a supplement file
ParameterStarting referenceEvidence required
Lead (Pb)3.0 mg/kg in the supplementMeasured value, method, release limit and the calculation at the finished dose
Cadmium (Cd)1.0 mg/kg, with category exceptionsMeasured value and the category used
Mercury (Hg)0.10 mg/kg in the supplementMeasured value and method
Arsenic (As)Customer or market limitAgreed limit and method on the certificate

The iron dose is a separate check. The label declares elemental iron, and the market may set a maximum daily intake for the finished product or a condition on the label. The brand confirms that the dose and the population on the label fit the destination before the specification is fixed.

Claims and the label

Label and claim review sit outside the certificate. In the EU, the wording has to come from the authorised list for iron; in the US, a structure/function statement needs the standard disclaimer. The brand's reviewer selects wording that fits the nutrient, the dose and the market, and checks that the finished label carries the required statement. This page makes no health claim for the ingredient, and no disease-related claim is made or implied.

The ingredient list must name the form that is actually present. “Ferrous bisglycinate” and a generic “iron chelate” are not interchangeable on a label, and a change of form is a relabelling exercise as well as a specification change. The reviewer should have the specification revision that matches the lot before approving any wording.

Documents in the file

Documents and the question each one answers
DocumentQuestion it answers
Specification, with version and dateWhat is being bought, including the form, the ratio and the iron window
Batch COAWhat this lot measured, with method and release limit
Technical data sheetAppearance, solubility, particle size and pack
Safety data sheetHandling, dust control and storage hazards
Allergen, GMO, origin and residual-solvent statementsThe declarations the importer needs for the destination
Change-control recordWhat changed in source, process or pack, and when

Undated documents gathered in a folder do not make a controlled file. Each document should carry a version that can be matched to the quotation, the specification and the lot.

Before the first order

  • Specification version, CAS number and the exact chelate form are named.
  • The certificate, data sheet, safety sheet and the allergen, GMO, origin and solvent declarations are collected and dated.
  • The destination route and the iron form have been checked against the current list.
  • Each contaminant result has been recalculated at the finished-product dose.
  • The label wording, the iron warning and the claim have been checked for the destination.
  • The supplier, route and packaging are under change control, and the documents match the lot.

Start with the catalog specification on the product page; the COA page walks through a lot's certificate; the identity page covers the testing behind it; the MOQ page covers pack and documents; how lots are released is described under quality.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation