Minerals & Electrolytes · Core range

Iron Bisglycinate

C₄H₈FeN₂O₄ · CAS 20150-34-9 · Ferrous bisglycinate, powder

Ferrous bisglycinate specified at 98.0–102.0% with 26.0–28.0% elemental iron; the chelate, the glycine ratio and the iron figure are part of the specification.

Assay (HPLC)
98.0–102.0%
Minimum order
1 kg
Indicative lead time
1–7 days
Standard packing
1 kg foil pouch25 kg fiber drum

Specification

What the certificate will report

Assay (HPLC)98.0–102.0%
Iron (titration)26.0–28.0%
AppearanceGreenish-grey to off-white powder
IdentificationIR and HPLC conform
Loss on drying≤5.0%
Heavy metalsPb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg
MicrobiologyAPC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent
Particle size≥95% through 40 mesh
Chemical formulaC₄H₈FeN₂O₄
CAS20150-34-9
Marker setFerrous bisglycinate 98.0–102.0%; Fe 26.0–28.0%
AppearanceGreenish-grey to off-white, free-flowing powder
SolubilitySoluble in water; the solution is acidic.

Primary method Complexometric titration and HPLC — the method behind each figure matters as much as the figure. How the COA is built →

What to confirm before ordering

  • Name the form: ferrous bisglycinate is a chelate, not the same material as ferrous sulfate or fumarate.
  • Ask for the iron figure, the glycine ratio and the assay; the chelate name alone does not state the dose.
  • The chelate is sensitive to oxidation and moisture; the pack and the storage condition belong in the specification.
  • Do not use the page as a label or a claim: the finished product's status is a separate legal question.

Buyer questions

Practical answers

What is Iron Bisglycinate specified to?

Assay (HPLC): 98.0–102.0%. The full specification adds Iron (titration), Appearance, Identification, Loss on drying, Heavy metals and the contaminant panel. Every figure on the batch COA is reported with the method used to produce it.

Is Iron Bisglycinate a chelate or a blend?

The catalog grade is a 1:2 iron–glycine chelate. Blends with the corresponding oxide or carbonate are a different material and are not supplied under this specification. The identity page explains how the distinction is tested.

Which dosage forms does this grade fit?

Capsules and tablets, Powder blends. The grade is selected against the dosage form and the target dose: capsule fill and tablet flow depend on bulk density and particle size, while a stick pack or gummy depends on dissolution and taste.

Which documents are supplied with the batch?

A batch-specific COA, TDS, SDS, allergen and GMO statements, an origin record and a residual-solvent statement. Third-party heavy-metal or microbiological reports can be arranged, and the specification comparison is issued before the first order.

What is the minimum order and lead time?

1 kg minimum, packed in a 1 kg foil pouch from a released lot; 25 kg fiber drums are available as quantities scale. 1–7 days after specification and order confirmation. Samples are typically 100–500 g and carry the COA of the lot they were drawn from.

Documentation

Released with every lot

  • Batch-specific certificate of analysis against the agreed specification
  • Technical data sheet with form, CAS or species, carrier, storage and packing
  • Safety data sheet in the 16-section format
  • Allergen, GMO and origin statements signed for the batch
  • Residual-solvent statement for the crystallisation system
  • Specification comparison against the specification you sent

What this page does not claim

Iron Bisglycinate is sold as an ingredient powder. No therapeutic or disease claim is made here, and no finished dosage form is offered. In the EU, claims for the nutrient or ingredient are restricted to the authorised list; in the US, structure/function statements are the responsibility of the brand that makes them and require substantiation. We publish specification, method, form and documents — that is the boundary of what we write.

Next step

Send the spec. We will confirm the form.

A competitor COA, a label claim or a target dose is enough to start. We reply with the grade we can release, the documents behind it and the questions we still need answered.