04 MOQ & ordering

Copper gluconate: MOQ, packaging and ordering

Technical document 04 · Reviewed 2026-11-19 · Copper Gluconate

On this page
  1. Why the minimum is 1 kg
  2. Pack sizes
  3. Dispatch and lead time
  4. What a quotation needs
  5. The sample carries a lot
  6. Terms to settle first

Copper gluconate is packed as a 1 kg foil pouch, and that pouch is the minimum order; production volumes ship in 25 kg fiber drums. The standard pack is quoted at 1–7 days. A quotation can be compared only when it carries six things: the salt and CAS number, the specification with its assay basis, the quantity and pack, the destination and Incoterm, the document set, and the end use and market.

In one line

A kilogram is the smallest unit that can carry its own lot code, sample and test record; the 25 kg drum is the production pack.

Why the minimum is 1 kg

One kilogram is a working unit. It leaves enough for a bench run, a retained sample and a third-party identity check, and it can fly without a pallet, so a formulator can hold material before the production plan is signed. The pack carries its own lot code and certificate; it is not a scoop out of a drum.

Copper is a low-dose mineral, so a kilogram goes a long way. At 14.0% copper, 1 kg of salt contains about 140 g of the element, and a 1 mg label claim uses 7.14 mg of salt. The real constraint is traceability, not the amount of copper in the pack.

Repacking below 1 kg adds a handling step and breaks the link to the original lot. The 25 kg drum lowers handling per kilogram, but it also means a longer storage period and more inventory. The minimum is a pack decision, not a volume incentive.

Pack sizes

Standard copper gluconate packs
PackNet weightTypical useNotes
Foil pouch1 kgBench trial, sample, small runMoisture barrier; close tightly after use
Fiber drum25 kgFull productionLiner bag; lot code repeated on drum and liner
Granulated powderOn requestBetter flow, less dustChanges the mesh and flow spec
Split or repackProject-specificBench workNew pack identity; record the split

The catalog powder passes 40 mesh at ≥95%. A granulated version is a separate physical specification: if the line needs coarser particles or freer flow, raise it before the quotation, because the mesh line and the schedule can both move. A diluted premix is a third specification, with the carrier and the copper figure written out.

Dispatch and lead time

Standard packs are quoted at 1–7 days after confirmation. That covers picking, paperwork and dispatch, not the transit, customs or the customer's own release. A granulated or non-standard pack takes longer, and the extra time should appear separately on the quotation.

Ask for the dispatch date as well as the lead time. A 25 kg drum usually moves on a pallet; a 1 kg pouch can go as a parcel. The Incoterm decides who books freight and who clears customs, so the documents need to travel with the lot.

What a quotation needs

A quotation can be compared only when it states six things:

  1. The salt and CAS number. Copper gluconate, 527-09-3, with the name written out.
  2. The specification. Assay and basis, copper, water, mesh, heavy metals and microbiology.
  3. The quantity and pack. 1 kg pouch, 25 kg drum, granulated or split.
  4. The destination and Incoterm. Country, port or address, and trade term.
  5. The documents. COA, specification, TDS, SDS, allergen, GMO and origin statements.
  6. The end use and market. Supplement, food or another category, and the country of sale.

A quotation that omits the market or the salt is not comparable with one that includes them. The same powder can fit one destination and fail the file for another, and the assay basis belongs in the offer. Commercial terms sit on the quotation, not on this page.

The sample carries a lot

The 1 kg pouch is the lot used for qualification. Check identity, assay, copper, water and microbiology before scaling, and keep a portion from the same pack. The lot code should run through the sample, the COA and the quotation. Without that link, the sample is a demonstration.

For a bench quantity below 1 kg, ask first. A split from a bulk lot becomes a repack with new traceability, not the catalog pack; record it as a split. The bench sample and the production drum are not guaranteed to be the same lot.

Terms to settle first

The quotation states the commercial terms, Incoterm, pack, lead time and documents. The quality terms belong next to them: specification revision, COA per lot, retained sample, retest period and change control. A quality agreement before the first production order is easier than one written after a dispute.

Returns and replacements are governed by the quotation and the quality agreement. If a lot fails the agreed specification, use the retained sample and a joint re-test rather than a photograph. Agree in advance which laboratory is acceptable to both sides and how a disputed result will be settled.

The catalog specification is on the product hub. Release tests are on the COA page, market files on the compliance page, and the MOQ glossary entry defines the term. Freight and documents are covered by the logistics page, and release and retained samples by the quality page.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation