Copper bisglycinate: MOQ, packaging and ordering
The minimum order is 1 kg, packed in a foil pouch; a 25 kg fiber drum is the production pack, and standard orders leave within 1–7 days. To turn an enquiry into a firm quotation, six details are needed: the chelate and CAS, the assay and copper figures, the quantity and pack, the destination and Incoterm, the documents, and the intended market. Custom granulation or a carrier premix is quoted separately.
One kilogram is the smallest traceable pack; at about 30% copper it holds roughly 300 g of the metal, so the minimum is a traceability unit, not a dose unit.
Why the minimum is 1 kg
At about 30% copper, a kilogram of chelate contains some 300 g of the metal — 300,000 mg. That is 300,000 servings at 1 mg of copper, or 150,000 at 2 mg. A bench programme cannot use that much, so the minimum is not a dose calculation; it is the smallest unit that can be sealed, coded and sampled as one lot.
A smaller quantity would be split from a bulk lot and repacked. The repack adds a handling step, the original pack identity is lost, and proving which lot the powder came from becomes harder. The 25 kg drum lowers handling per kilogram and suits production, but it ties up inventory and storage.
Copper content also changes how packs are compared. A 1 kg pack of a 14% copper salt holds less than half the metal of the same weight here. Compare copper per pack, not just kilograms.
Packs and formats
| Format | Net fill | Where it fits | Handling note |
|---|---|---|---|
| Heat-sealed foil pouch | 1 kg | Trial, sample, small batch | Moisture barrier; reseal after opening |
| Fiber drum | 25 kg | Production | Inner liner; record the opening date |
| Granulated powder | Quoted on request | Flow and dust control | New mesh and flow specification |
| Carrier premix | Quoted on request | Low-dose blending | Carrier, copper figure and label change |
The catalog powder passes 40 mesh at ≥95%. Granulation and dilution are not packing options; they change the specification. Tell us before the quotation if you need either one.
On the drum, the inner liner is the barrier: keep it closed, keep the drum off a damp floor and note when it is opened. On the pouch, the seal is the barrier. A folded top is not a reseal, and the headspace now holds humid air. Move a long-held remainder into a smaller opaque container, or finish it within the stated in-use period.
Lead time and dispatch
Standard orders are dispatched 1–7 days after confirmation. That covers picking, documents and handover to the carrier; transit, customs and the customer's quality release sit outside it. A custom granulation, dilution or non-standard pack adds time, quoted separately.
Ask for a dispatch date as well as a lead time. A drum may ship on a pallet and a pouch as a parcel; the Incoterm decides who books freight and who clears entry. Documents should travel with the goods, not follow them.
What a quotation needs
Six items make an offer firm enough to compare:
- Ingredient and form. Copper bisglycinate, CAS 13479-54-4, with the chelate named.
- Specification. Assay and basis, copper figure, loss on drying, mesh, metals and microbiology.
- Quantity and pack. 1 kg pouch, 25 kg drum, granulated powder or carrier premix.
- Destination and Incoterm. Country, address or port, and the trade term.
- Documents. COA, specification, SDS and any market-specific statement.
- Use and market. Supplement, food or another use, and where it will be sold.
An offer without the form and the market is incomplete. The same powder can suit one destination and fall outside the file for another. Commercial terms are stated on the quotation, not on this page.
The sample is a lot, not a demonstration
The 1 kg pouch is the qualification lot. Check identity, assay, copper, loss on drying and microbiology before scaling, and retain material from the same pack. Sample, COA and quotation should share a lot code; a sample that cannot be traced is a demonstration.
Because the dose is small, one pouch supports many bench trials and still leaves a retained sample. That is an argument for documenting the pack, not for assuming it will cover production. A smaller bench quantity is a repack and should be recorded as one.
Terms to settle before the first order
Before the first production order, settle the commercial and quality terms together. The quotation covers the specification, Incoterm, pack, lead time and documents; the quality agreement covers the specification revision, per-lot COA, retained sample, retest date and change control.
Decide how a failing lot will be handled before it happens: a joint re-test on the retained sample, an agreed referee laboratory, and a clear answer on who pays. A photograph of powder is not a result. Returns and replacements should follow the same document.
Also agree what counts as a change: source, process, pack or specification. Notification should be automatic, with a new COA and, where relevant, new stability data.
The catalog specification sits on the product page. The COA page explains the release tests; the compliance page covers the market file; the grades page covers mesh and dilution; the methods library describes the tests; the quality page describes release.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation