The regulatory file for copper bisglycinate
Copper bisglycinate is supplied as copper bisglycinate, CAS 13479-54-4, and the regulatory file is built around that exact chelate, the destination and the finished-product dose. The catalog specification and the batch COA describe the material; they do not establish that the form or the level is permitted in a named market. The buyer's regulatory team confirms the route, and this page lists the framework, the limits and the documents that belong in the file.
The specification describes the chelate; the regulatory file shows the route, the copper limits and the label for the destination, and the buyer's team confirms it.
What the file contains
For copper bisglycinate the file is built around the chelate: the copper figure, the glycine ratio, the ligand identity and the oxidation state. The certificate is the lot record, the technical data sheet is the specification record, and the safety data sheet is the handling record. None of the three, on its own, tells the buyer whether the form is permitted in the destination market.
The pack also carries the allergen and GMO statements, the origin record, the residual-solvent statement and any customer-specific declaration. If one of those is missing for the lot, name the gap before the order rather than at the port. A version-controlled document list is easier to audit than a folder of undated PDFs.
Great Britain and Northern Ireland are checked separately. The GB file uses the current GB register and GB labelling rules; Northern Ireland follows the EU framework. The buyer's team confirms which of the two applies to the destination and keeps the evidence with the order.
European Union
The EU file rests on the general food law, Regulation (EC) No 178/2002, the food-supplement framework in Directive 2002/46/EC, the labelling rules in Regulation (EU) No 1169/2011, the contaminant rules in Commission Regulation (EU) 2023/915, and the nutrition and health claims rules in Regulation (EC) No 1924/2006. The current consolidated texts are the reference; this summary is not a substitute for them.
Two reference points are useful when the dose is set. The labelling reference intake for copper is 1 mg/day under Regulation (EU) No 1169/2011, Annex XIII, and the tolerable upper intake for adults used in the EU risk assessment is 5 mg/day. Neither is a permission to place a particular form on the market, and neither replaces the destination member state's position. As of this review, the buyer's regulatory team confirms the route and checks the current text, including any national limit on copper in food supplements.
United States
The US file is built on the dietary-supplement route: the Federal Food, Drug, and Cosmetic Act as amended by the Dietary Supplement Health and Education Act of 1994, the current good manufacturing practice rules in 21 CFR 111, and the Supplement Facts rules in 21 CFR 101.36. A dietary ingredient that is not an old dietary ingredient needs a new dietary ingredient notification under 21 USC 350b; the supplier should be able to say which basis it relies on.
The tolerable upper intake for copper used in the US assessment is 10 mg/day for adults, and the Daily Value is set in the current Supplement Facts regulations. The buyer confirms that the ingredient's status and the finished-product dose fit the route. The label and any structure/function wording are reviewed separately from the certificate, and the current text should be checked as of this review.
Contaminants and limits
The contaminant panel is a finished-product calculation, not only a drum result. The table below is a starting point for a food-supplement file; the destination text and the daily dose decide the final limit.
| Parameter | Typical supplement reference | What the file should show |
|---|---|---|
| Lead (Pb) | 3.0 mg/kg in the supplement | Lot result, method, limit and finished-product calculation |
| Cadmium (Cd) | 1.0 mg/kg in the supplement | Lot result and any category exception that applies |
| Mercury (Hg) | 0.10 mg/kg in the supplement | Lot result and method |
| Arsenic (As) | Customer or market limit | The agreed limit and the method, stated on the certificate |
| Copper per daily dose | The declared figure and the upper intake | The dose arithmetic from the label to the finished product |
The copper line is the one that is easy to leave out. A premix or a capsule may meet the contaminant panel and still deliver a copper dose that the destination does not accept. The calculation starts from the chelate's copper figure, 29.0–31.0%, and ends at the declared elemental copper on the label.
Label and claims
The label names the source of the copper: “copper (as copper bisglycinate)”. The declared quantity is elemental copper, not the chelate mass. The claim review is separate: the brand's regulatory reviewer confirms that the wording is allowed for the product, the form and the market, and that any permitted claim meets its conditions. The certificate does not approve a claim, and a claim does not change the specification.
No disease-related claim is made for this material, and the raw-material page is not a label. Where a permitted claim for copper is used, it is the finished product that carries it, at the dose and in the wording that the destination register allows. The brand's reviewer keeps the evidence for the claim with the label file.
Documents the file needs
- Specification with the version, CAS number and chelate name.
- COA for the lot, with assay, copper, identity, loss on drying and contaminants.
- Technical data sheet and safety data sheet.
- Allergen, GMO, origin and residual-solvent statements.
- Elemental-impurity and microbiology results, with methods.
- Stability summary for the pack being bought.
- Packaging declaration and change-control statement.
- Halal or kosher certificates where the market requires them.
The documents should refer to the same specification version and the same lot family. A COA for a different pack, a specification from an earlier revision and a stability summary for another product do not make a file.
Checklist before the first order
- Specification version, CAS and the chelate form are named.
- COA, TDS, SDS and the declaration set are on file.
- The copper figure is converted to the declared elemental copper.
- The contaminant results are converted to the finished-product dose.
- The label and any claim have been reviewed for the destination.
- The source, process and pack are under change control.
The product hub carries the catalog specification; the COA page explains the lot certificate; the identity page covers the analytical evidence; the copper gluconate page shows the same file for the other salt; the methods library describes the tests; the quality page describes the release file.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation