02.1 Picolinate vs chloride

Chromium picolinate vs chromium chloride: chromium content, stability and the label

Technical document 02.1 · Reviewed 2026-11-18 · Chromium Picolinate

On this page
  1. Two sources, line by line
  2. The chromium conversion
  3. Dry stability and solution behaviour
  4. What the label has to say
  5. When to choose which
  6. What a switch changes

Chromium picolinate and chromium chloride hexahydrate deliver the same element from different compounds. The picolinate carries 12.2–12.4% chromium; the chloride hexahydrate carries about 19.5%, so a 200 µg chromium dose is about 1.63 mg of picolinate or 1.03 mg of chloride. The chloride is freely soluble and hygroscopic; the picolinate is sparingly soluble and stable dry. Both forms are on the EU permitted list, so the choice turns on the dosage form, the pack and the label rather than on the chromium number alone.

In one line

The same 200 µg of chromium is 1.63 mg of picolinate or 1.03 mg of chloride hexahydrate; the difference in the powder, not the dose, is what changes the formula.

Two sources, line by line

Chromium picolinate and chromium chloride hexahydrate compared
ParameterChromium picolinateChromium chloride hexahydrate
FormulaC18H12CrN3O6CrCl3·6H2O
CAS14639-25-910060-12-5
Chromium content12.2–12.4%About 19.5%
Powder for 200 µg CrAbout 1.63 mgAbout 1.03 mg
Solubility in waterSparingly solubleFreely soluble
Moisture behaviourCrystalline solid, LOD ≤0.5%Hygroscopic, deliquescent
Solution behaviourpH-sensitive complexAcidic solution
EU permitted listChromium picolinateChromium(III) chloride
Label ingredientChromium picolinateChromium chloride or chromium(III) chloride

The two rows that matter most are the chromium content and the moisture behaviour. The first sets the powder weight; the second sets the pack and the process. The label row is not a formality: the ingredient list has to name the source that the COA describes.

The chromium conversion

The conversion is simple arithmetic, and it is the first thing to put in a comparison. Divide the elemental chromium target by the chromium fraction of the source. At 12.3%, 200 µg ÷ 0.123 = 1,626 µg, or 1.63 mg. At 19.5%, 200 µg ÷ 0.195 = 1,026 µg, or 1.03 mg. A 1 mg chromium dose would need 8.13 mg of picolinate or 5.13 mg of chloride hexahydrate; both are still small weights for a capsule.

Those weights explain the dilution. A formulator cannot weigh 1.63 mg into a capsule at production speed, so the picolinate can be supplied as a 1% dilution or blended from a premix. At 1%, a 200 µg dose is about 163 mg of blend. The chloride can be dissolved instead, which avoids the weighing problem but introduces water, pH and preservative questions. The assay behind the fraction is described in the ICP-OES method note.

Dry stability and solution behaviour

Dry, the picolinate is the easier material. It is a crystalline solid with a ≤0.5% loss-on-drying limit, and a sealed foil pouch or fiber drum keeps it dry. The chloride hexahydrate is hygroscopic and will pick up water from the air; an open drum changes weight, flow and the assay as sold, and the pack has to be moisture-tight. The chloride also gives an acidic solution, so a liquid formula needs a pH check and a stability study on the finished matrix.

In solution, the comparison reverses. The chloride dissolves freely, while the picolinate is sparingly soluble and may need a dispersion or a dilution. The picolinate complex is also pH-sensitive: an acidic drink and an alkaline drink are different experiments. Neither source can be swapped into a formula on the strength of a dry-stability result alone.

What the label has to say

The label has to name the source, not just the element. In the EU, both forms are on the Annex II list, but they are separate entries: “chromium picolinate” and “chromium(III) chloride”. In the US, the ingredient list names the form used, and the Supplement Facts panel declares chromium as the element. A switch from picolinate to chloride therefore changes the ingredient list even when the chromium amount per serving stays the same.

Three other label elements move with the source: the powder weight in the batch record (not usually on the label, but in the specification), the carrier or dilution statement if a premix is used, and the storage statement if the chloride's hygroscopicity requires a tighter pack. The claim wording is a separate check; this page does not propose one. The label should not describe the chloride as picolinate or the picolinate as chloride, and a generic “chromium” ingredient line is not a substitute for the source name.

When to choose which

Choose the picolinate for a dry capsule or tablet when the label names picolinate, the pack can keep moisture out, and the formula can carry a 1% dilution. Choose the chloride hexahydrate for an aqueous format where solubility is required and the pH, preservative and pack are under control; it is the more soluble source and the more demanding dry ingredient. Choose neither on the basis of the chromium percentage alone, because the percentage is the one line the two sources can be made to share.

If the label needs chromium polynicotinate, this comparison does not apply; that is a different complex with a supplier-defined chromium content, and the grade page covers it. If the destination is the EU, check the Annex II entry for the exact form before the formula is fixed.

What a switch changes

A source switch changes six groups of things: the ingredient name, the chromium assay and the powder weight, the solubility and the dosage form, the moisture limit and the pack, the identity methods, and the stability protocol. It can also change the permitted-form check. A switch that updates the purchase order but not the label, the specification and the stability file leaves three documents describing the old material.

The safest sequence is to fix the label and the market first, then choose the source that can meet both, then run the blend and stability work on that source. The chromium arithmetic is the easy part; the pack and the label are where the switch is won or lost.

The broader source comparison is on the grade page; the moisture and blend questions are on the stability page; the EU listing is on the compliance page; the identity tests are on the identity page; the catalog specification sits on the chromium picolinate hub.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation