Chromium picolinate: MOQ, packaging and ordering
The minimum order for chromium picolinate is 1 kg, packed as a 1 kg foil pouch; the standard larger pack is a 25 kg fiber drum, and the catalog lead time is 1–7 days. One kilogram is not a dose-count minimum. At 12.2–12.4% chromium it contains about 122–124 g of elemental chromium, which is more than 600,000 doses at 200 µg. It is the smallest unit that can be drawn from a released lot, shipped with its own COA and used for qualification.
One kilogram is a qualification unit, not a production batch: it carries the lot identity, the COA and enough material to run the blend and stability trials before the drum is ordered.
Why the minimum is 1 kg
The arithmetic explains why the minimum is not driven by the number of doses. One kilogram at 12.3% chromium contains 123 g of chromium, or 123,000 mg. At 200 µg per dose that is 615,000 doses; at 100 µg it is 1.23 million. Even a 1% dilution of one kilogram contains 10 g of picolinate, about 1.23 g of chromium and roughly 6,150 doses at 200 µg.
What one kilogram does buy is a released lot with a lot code, a COA, a retained sample and enough material for identity checks, a blend trial and the first stability pull. For a low-dose ingredient, that is the useful unit. A larger drum is a production decision; the pouch is the qualification decision.
Packs and what they are for
| Pack | Net content | Typical use | What to confirm |
|---|---|---|---|
| 1 kg foil pouch | 1 kg | Qualification, small batches | Seal, lot code, COA |
| 25 kg fiber drum | 25 kg | Production | Inner liner, lot code, COA |
| 1% dilution | Net weight as agreed | Low-dose blending | Carrier, dilution ratio, blend assay |
| Granulated grade | Net weight as agreed | Flow-sensitive lines | Granulation, particle size |
The pack is the net weight of the material as sold. A dilution is its own article: the carrier, the ratio and the chromium assay of the blend belong on its COA, not only the assay of the parent picolinate. The same applies to a granulated grade, where the particle size and flow are part of what was ordered.
Lead time
The catalog lead time is 1–7 days. That window covers material from a released lot; a custom dilution, a granulated grade or a document that has to be issued for a new market can add time. Destination and transport are separate from production, and the quotation should state which part of the timeline is which.
If the order is for a first launch, ask for the lot's release date and the current retest period at the same time as the lead time. A short lead time on a lot that is close to its retest date is not the same offer as a short lead time on a fresh lot.
What a quotation needs
| Detail | Why it changes the quotation |
|---|---|
| Product and source | Picolinate, a dilution or a granulated grade |
| Chromium assay | 12.2–12.4% or a diluted assay with a named carrier |
| Quantity and pack | 1 kg pouch, 25 kg drum or an agreed net weight |
| Destination and delivery term | Port, Incoterm, documents and any label work |
| Document set | COA, SDS, specification, allergen and identity records |
| Timing and sample | First order, repeat order, trial date and tests |
A quotation that omits the source, the assay and the pack is a number without an article. The six lines above are the minimum needed to compare two offers, and they are also the minimum needed to write the purchase order so that the lot arrives as specified.
Samples and qualification
A sample should come from a released lot and carry the same lot code as the COA. Say what you will test: chromium by ICP-OES, IR and HPLC identity, LOD, particle size, and a blend trial at your intended dilution. If the sample is a subsample from a pouch, ask how it was taken and whether the remainder was retained.
The 1 kg pouch is the smallest standard pack; a documented subsample can be agreed for a laboratory check. The point of either is the same: the material you test should be traceable to the certificate you file.
Terms to settle before the order
Terms are confirmed on the quotation: delivery term, payment term, documents, pack and the retest period. Two clauses deserve a line of their own. First, the specification that governs the lot should be attached to the order, not left in an email. Second, the label and the ingredient name should be agreed before the material is packed; a change after packing is a new lot or a new label, not a note on the invoice.
For a repeat order, quote the lot code and the specification revision. That is how a second drum is compared with the first without reopening the whole qualification file.
The certificate lines that travel with the pack are described on the COA page; the storage and pack questions are on the stability page; the release workflow is on the quality page; the catalog specification sits on the chromium picolinate hub.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation