Calcium chloride MOQ, packs and lead time
The minimum order is a single 1 kg foil pouch of calcium chloride dihydrate; production volume ships in a 25 kg fiber drum, and the standard pack is quoted at 1–7 days. A deliquescent salt makes the pouch and its seal part of the quotation rather than a dispatch detail. A granulated form or a different particle profile is a separate specification, with its own particle-size line and lead time.
One kilogram is the smallest pack that can be sampled, tested and traced as a lot, and for a deliquescent salt the seal on that pack is part of the specification.
Why the minimum is 1 kg
One kilogram covers a bench trial, a retained sample and an independent identity test, and it fits a courier parcel. That matters when a formulator needs powder before the production plan is fixed. Each pouch is a commercial unit with its own lot code and certificate, not a scoop taken from a drum.
Below 1 kg the material is normally split from a production lot and repacked. For calcium chloride dihydrate that costs more than the handling: the split exposes the powder to room air, the replacement pouch may not have the same moisture barrier, and the original lot trail becomes harder to follow. The 25 kg drum cuts handling per kilogram, but it ties up inventory and storage time. The minimum follows the pack, not a volume target.
Packs and formats
| Format | Net weight | Typical use | Notes |
|---|---|---|---|
| Foil pouch | 1 kg | Trial, sample, small batch | Moisture barrier; reseal, or transfer the remainder after opening |
| Fiber drum | 25 kg | Production | Liner; lot code stamped on drum and liner |
| Granulated powder | On request | Dust control and flow | Particle size changes; chemistry unchanged |
Catalog calcium chloride dihydrate is milled to ≥95% through 80 mesh. Granulation changes that sieve profile, so it is a new physical specification rather than another bag size. If a capsule filler or sachet line needs a coarser, freer-flowing granule, raise it before the quotation: the sieve line changes and the lead time may move with it.
Lead time and dispatch
An order confirmed on the standard pouch or drum is quoted at 1–7 days. Those days cover picking, the lot file and handover to the forwarder; transit, customs and the buyer's own release sit outside them. A special granulation, a split pack or a non-standard pack gets its own date in the quotation instead of being folded into the standard window.
Put the dispatch date in the order, not just the 1–7 day range. The pouch usually leaves as a courier parcel; the drum is palletised, and the Incoterm decides who books the freight and who clears entry. Send the COA and the lot file with the material rather than after it, because a quality team may have to release a hygroscopic powder before the pack is opened.
What a quotation needs
Six details make two quotations comparable:
- Product and form. Calcium chloride dihydrate, CAS 10035-04-8, written as CaCl₂·2H₂O with its water range.
- Specification. Assay and its hydrate basis, calcium, Karl Fischer water, heavy metals, microbiology and the 80 mesh particle size.
- Amount and pack. A 1 kg pouch or a 25 kg drum; a granulated form is quoted separately.
- Delivery point and Incoterm. The country, port or street address, and the trade term that applies.
- Documents. COA, TDS, SDS, food-grade statement, allergen and GMO statements, and any market-specific declaration the importer needs.
- Intended use and market. Whether the destination file counts it as a food additive, a mineral source or a processing aid, and where the finished product will be sold.
Leave out the hydrate form or the water range and the offer cannot be compared: the dihydrate and the anhydrous salt share a name but not a mass per dose. Commercial terms are not printed on this page; they belong in the quotation.
The sample is a lot, not a demonstration
Use the 1 kg pouch as the qualification lot, not as a demonstration. Before scale-up, run identity, assay, calcium, Karl Fischer water and microbiology, and retain a portion from that same pouch. Repeat the water test when the parcel arrives as well as at release: powder that has stood open on a bench no longer represents what was shipped. Pouch label, COA and quotation should all carry one lot code.
A bench trial that needs less than a kilogram is normally a repack from a production lot, not the catalog pouch. Request the split in writing, and file its lot code beside the trial data. The bench sample and the drum that follows can be different lots even when every certificate line reads the same.
Terms to settle before the first order
The quotation and the quality agreement should read as one document: spec revision, pouch or drum, Incoterm, the dispatch window, a COA for every lot, the retained sample, the retest period and how a change is handled. Settle all of it before the first production order; once a dispute exists, the same conversation is much harder.
When a lot misses the agreed specification, the evidence is the retained sample and a joint re-test by the named method — not a photograph of the drum. Caking is the awkward case: a pouch that has set solid can still pass the assay and yet jam the filler. The agreement should say whether caking is a defect, how it is judged and what remedy follows.
Catalog figures are on the product hub; the release tests are on the COA page; market files are on the compliance page; moisture and pack behaviour are on the stability page; the release workflow is on the quality page.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation