The regulatory file for calcium chloride
Calcium chloride can enter a market as a food additive, as a source of calcium in a supplement, or as a processing aid, and each route carries its own limits, label rules and documents. In the EU the additive is E 509, with purity criteria in Commission Regulation (EU) No 231/2012; in the US, 21 CFR 184.1193 affirms it as GRAS for direct food use. The buyer's regulatory team confirms the route for the finished product and the destination; this page lists what the file should hold.
The same salt can enter a market as a food additive, a mineral source or a processing aid, and the route decides the limits, the label and the documents.
What the file contains
The file has four parts: the specification for the exact form, the certificate that releases the lot, the route and limits for the destination, and the change-control record for source, process and pack. The COA reports the lot, the TDS states the specification and the SDS covers handling. None of them decides the route, which is recorded separately.
Start with the form. The dihydrate, CAS 10035-04-8, is the catalog material; the anhydrous salt, CAS 10043-52-4, is a different product with a different mass per dose. A file that names “calcium chloride” without the hydrate has left the identity open, and the label cannot be checked against an open identity.
European Union
In the EU, calcium chloride is authorised as the food additive E 509 under Regulation (EC) No 1333/2008, and its purity criteria sit in Commission Regulation (EU) No 231/2012. For a food supplement, Directive 2002/46/EC Annex II lists calcium chloride among the permitted calcium sources, as amended; the buyer checks the current annex and the member-state route, as of this review. General food law, labelling under Regulation (EU) No 1169/2011 and the contaminant limits apply alongside those entries.
The additive use and the supplement use are not the same file. An additive entry has a functional class and conditions of use in the additive annexes; a supplement source is a nutrient form. A product can rely on both, but the file and the label should say which basis is being used for which purpose.
United States
In the US, 21 CFR 184.1193 affirms calcium chloride as GRAS for direct food use in accordance with good manufacturing practice. For a dietary supplement, the ingredient has to be positioned as a dietary ingredient, and the Supplement Facts panel declares the calcium; 21 CFR 101.36 sets the panel format. The supplier names the basis it relies on, and the buyer checks that the basis covers the finished product and the claim.
State rules are separate. California Proposition 65 has its own lead threshold, and a pharmacopoeial claim brings USP <232> and <233> into the file. Neither question is settled by the COA, and both should be asked before the formula is fixed.
Contaminants and the finished dose
The contaminant limits are a finished-product calculation. At the catalog limits, a 500 mg calcium dose from the dihydrate is about 1.83 g of powder, so a lead result of 3 mg/kg contributes about 5.5 µg of lead to that dose. The calculation has to be repeated for the actual dose and the actual lot result.
| Parameter | Ingredient limit | What the file should show |
|---|---|---|
| Lead (Pb) | ≤3 mg/kg | Lot result, method and the finished-dose calculation |
| Arsenic (As) | ≤2 mg/kg | Lot result and method |
| Cadmium (Cd) | ≤1 mg/kg | Lot result and the EU supplement level |
| Mercury (Hg) | ≤0.1 mg/kg | Lot result and method |
In the EU, Regulation (EU) 2023/915 sets maximum levels for food supplements: lead 3.0 mg/kg, cadmium 1.0 mg/kg with limited exceptions, and mercury 0.10 mg/kg, as of this review. The finished-product level applies to the supplement as sold, not to the drum, and a highly soluble salt is easy to distribute unevenly in a small batch if the premix is not validated.
Label and claims
Claims are a separate review. In the EU, a calcium claim has to come from the authorised list in Regulation (EU) No 432/2012 and be used under Regulation (EC) No 1924/2006; the claim is about calcium, not about the salt. In the US, a structure/function statement needs substantiation and the DSHEA disclaimer. A disease-related claim is a separate route in both markets, and a certificate does not support a claim.
The label names the salt. In the EU ingredient list, calcium chloride is declared by name, and where it functions as an additive the E number and the functional class are added in the form the destination requires. In the Supplement Facts or the nutrition declaration, calcium is declared as the nutrient, not as the salt. If the brand claims a source, the source in the file has to match the pack.
The chloride side needs its own check. The salt contributes chloride as well as calcium, and the destination's rules decide whether that contribution is declared or only counted in the formula. A label that declares calcium but not the counter-ion is not necessarily wrong, but the omission should be a decision rather than an oversight.
Documents for the file
The file needs the COA with the titration assay, calcium, water by Karl Fischer, the identity tests and the metal panel; the TDS with the specification version; the SDS; the food-additive compliance statement for E 509 and the purity criteria; the GRAS citation for the US; the allergen statement, which for this mineral salt declares no allergen; the GMO statement; the country of origin; and any halal or kosher certificate the customer requires.
The specification must name the dihydrate and the assay basis, because a 99.0–101.0% figure expressed as the dihydrate is not the same number as an anhydrous assay. Add the pack and the storage condition: for a deliquescent salt, the barrier is part of the material's identity in use, and a certificate for a pouch does not automatically cover a repacked container.
Checklist before the first order
- Specification version, CAS number and hydrate form are named.
- COA, TDS, SDS, additive and GRAS statements are on file.
- The contaminant results are converted to the finished-product dose.
- The label and the claim have been reviewed for the destination.
- Source, process and pack are under change control.
- The quotation, the specification and the certificate refer to the same version.
The product hub carries the catalog specification; the COA page explains the lot certificate; the identity page covers the analytical evidence; the grades page covers the form; the quality page describes the release file.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation