02 Grade and form

Calcium chloride dihydrate or anhydrous: choosing the form

Technical document 02 · Reviewed 2026-11-20 · Calcium Chloride

On this page
  1. Why one name covers several products
  2. The dihydrate and the anhydrous salt side by side
  3. Deliquescence, dissolution and the powder
  4. Dose arithmetic and the label
  5. What to write into the specification
  6. When the other form is the wrong choice

Calcium chloride is sold as the dihydrate powder, the anhydrous salt, and granulated or solution forms. The catalog grade is the dihydrate at 99.0–101.0% by titration with 27.0–29.0% calcium and 20.0–25.0% water; the anhydrous salt carries about 36% calcium and much less water. The form changes the mass that carries a dose, the hygroscopicity and the label before it changes the assay.

In one line

The dihydrate and the anhydrous salt are different products: the form fixes the calcium content, the water figure and the mass that carries a given calcium dose.

Why one name covers several products

Calcium chloride is a hydrate in its ordinary food and supplement form. The dihydrate, CaCl₂·2H₂O, holds two water molecules per calcium ion; the anhydrous salt, CaCl₂, holds none. Both are called calcium chloride on a purchase order, and both can titrate near 100% against their own formula, so the assay alone does not tell the buyer which powder is in the drum.

The commercial forms follow the water. A 74–80% flake is the dihydrate or a partly dried form of it, a 94–97% powder or granule is the anhydrous salt with some residual water, and a 30–40% solution is the salt in water. The catalog powder is the dihydrate at 80 mesh; the flake, the anhydrous granule and the solution are separate specifications, even though the chemistry is the same.

The choice is not a purity hierarchy. The anhydrous salt is not “stronger” in a useful sense; it is the same calcium in a smaller mass, with a greater affinity for water. The dihydrate is easier to weigh and less aggressive in the drum, but it brings 24.5% water with every gram. The form has to match the dosage form and the pack.

The dihydrate and the anhydrous salt side by side

Calcium chloride dihydrate and the anhydrous salt
PropertyDihydrate powderAnhydrous powder or granule
CAS number10035-04-810043-52-4
FormulaCaCl₂·2H₂OCaCl₂
Assay99.0–101.0% as the dihydrateUsually 94.0–97.0% as CaCl₂
Calcium27.0–29.0%About 34.0–35.0%
Water20.0–25.0% by Karl FischerA few percent or less
HygroscopicityDeliquescent in humid airMore aggressive; keep sealed
Typical useCapsules, blends, beverage concentratesConcentrates and moisture-tolerant systems
Label nameCalcium chlorideCalcium chloride

The last row is the same for both, which is why the form has to be written into the specification rather than inferred from the ingredient name. The assay figures are not directly comparable either: 99.0–101.0% as the dihydrate is about 75% calcium chloride, while 96.0% as CaCl₂ is about 96% calcium chloride. A buyer who compares the two percentages without the basis will draw the wrong conclusion about which powder is richer.

Deliquescence, dissolution and the powder

The catalog fixes ≥95% through 80 mesh. The dihydrate is a free-flowing powder when dry, but it is deliquescent: in humid air it absorbs water, cakes and eventually dissolves in the water it has taken up. The anhydrous salt is more aggressive, and it releases more heat when it dissolves. A spill on a damp bench or on skin needs water and care, not a dry brush.

Dissolution is exothermic. A concentrated stock warms as the salt goes in, so make it in a plastic or stainless-steel vessel, add the salt to the water rather than the water to the salt, and let the solution cool before it meets a heat-sensitive ingredient. The solution is neutral to slightly acidic as supplied; it does not buffer the formula.

Bulk density, flow and particle distribution are not on the catalog list, and they are what decide how the powder fills a capsule or a sachet. A granulated grade can run faster on a filler and generate less dust, while a fine powder disperses faster in a beverage concentrate. Ask for the particle profile and a sample from the production pack, not only the mesh line.

Dose arithmetic and the label

The arithmetic follows the calcium figure. A 500 mg elemental calcium dose needs 500 ÷ 0.2726 = 1.83 g of the dihydrate, or about 1.38 g of the anhydrous salt at 36.1% calcium. A 200 mg dose needs 734 mg of the dihydrate; 1,000 mg needs 3.67 g. The dihydrate mass is larger because a quarter of it is water.

The chloride comes with the calcium. About 1.83 g of the dihydrate carries 0.88 g of chloride, and the same 500 mg of calcium from the anhydrous salt carries about the same chloride, because the calcium-to-chloride ratio is fixed by the formula. A form change does not reduce the chloride load for the same calcium dose; it changes the mass, the water and the handling.

Taste is the other constraint. Calcium chloride is salty and slightly bitter at high concentration, and a stick pack carrying 500 mg of calcium is a strong taste. A capsule avoids the taste but needs a fill weight that can hold 1.83 g, which is two large capsules or a tablet. A beverage concentrate can carry the salt when the dilution and the flavour mask are designed for it. The label should state the salt and the elemental calcium, and the two figures should agree with the weigh-up.

What to write into the specification

  • “Calcium chloride dihydrate, CAS 10035-04-8, CaCl₂·2H₂O.”
  • “Assay 99.0–101.0% by titration, expressed as the dihydrate; calcium 27.0–29.0%; water 20.0–25.0% by Karl Fischer.”
  • “Identification: calcium and chloride conform.”
  • “Particle size ≥95% through 80 mesh; state the particle profile if the powder is to be filled.”
  • “Heavy metals Pb ≤3, As ≤2, Cd ≤1, Hg ≤0.1 mg/kg; microbiology as listed.”
  • “No carbonate, sulfate or sodium chloride added; hydrate form and water under change control.”
  • “Destination and intended use confirmed before the order; the label names the salt.”

The negative clause is part of the form decision. A dihydrate specification that does not exclude the carbonate, the sulfate and the sodium chloride leaves the cheaper substitutions inside the calcium window, and the chloride figure is the line that catches them.

When the other form is the wrong choice

If the formula needs a non-hygroscopic powder, neither form is a good answer: the dihydrate still picks up water, and the anhydrous salt is worse. A sealed sachet, a foil-lined pack or a granulated grade with a proper moisture barrier is the practical fix. If the process adds the salt to an acidic, water-rich mix and the powder must stay free-flowing on the line, the dihydrate is easier to handle but still needs a controlled room.

If the label names calcium carbonate, the chloride cannot be substituted. The carbonate carries more calcium per gram, behaves differently in acid and changes the pH, so the switch is a new formula and a new label. The chloride versus carbonate comparison takes the solubility, the pH and the label further.

The product hub carries the catalog figures; the COA page shows how the hydrate is reported; the calcium carbonate page is the other side of the salt choice; the methods index covers the titration and water tests; the quality page describes the release workflow.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation