What the COA for phosphatidylcholine actually contains
A phosphatidylcholine certificate reports the PC figure by HPLC, the phospholipid class profile, moisture, acid value and peroxide value, plus the heavy-metal and microbiological panels. The PC figure is class-specific, so it is not interchangeable with total phospholipids or with acetone-insoluble matter. The limits in the first table are the catalog gates; the lot certificate is what proves a given pack met them.
The PC figure is a class-specific HPLC result, and it only means something beside the phospholipid profile, the moisture and the acid value.
The certificate as a class assay
A PC certificate is auditable when each line can be read on its own: the parameter, the method that produced the number, the release limit and the measured result. A bare “conforms” leaves the reader unable to see how the conclusion was reached.
The defining line is the PC assay by HPLC. It is not the same line as total phospholipids, and it is not the same line as acetone-insoluble matter. A certificate that reports only the last two has described a phospholipid mixture, not the grade.
| Test | Method | Release limit |
|---|---|---|
| Appearance | Visual | White to light yellow waxy solid or powder |
| Identification | Phospholipid profile by HPLC | Profile conforms to the reference |
| Phosphatidylcholine | HPLC, class separation | ≥90.0% |
| Moisture | Karl Fischer or loss on drying, as stated | ≤1.0% |
| Acid value | Titration, mg KOH/g | ≤30 |
| Peroxide value | Titration, meq O2/kg | ≤5.0 |
| Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg |
| Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent |
Two figures are often confused. The PC figure answers how much of one phospholipid class is present; the total phospholipid figure answers how much phosphatide the lot carries across all classes. The first is the grade; the second is context, and it is usually reported as a separate line.
What the PC percentage is a percentage of
The HPLC method separates the phospholipid classes and measures the PC peak against a PC reference standard. The certificate should name the column and mobile phase, the detector, the standard and the integration basis. A PC result without a method is a figure without meaning.
Detectors differ. Evaporative light-scattering and charged-aerosol detectors respond to the mass of the eluted phospholipid; UV detection at a low wavelength is less specific and can miss the difference between classes. If two suppliers report 90% PC by different detectors, the figures are not automatically comparable.
The basis matters too. The catalog sets PC at ≥90.0% by HPLC and moisture at ≤1.0%. The certificate should say whether the PC figure is calculated on the material as received or on the dried basis. With moisture near the limit the two readings differ by about one point, which is enough to move a lot across the release line.
A PC figure is also not a purity figure for a single molecule. The CAS number covers a soy-derived mixture of molecular species with different fatty acids, so there is no single molecular weight to convert from. The assay measures the class, not one compound.
Release limit versus batch result
On a well-built certificate, the limit and the measurement sit in different columns, and the method sits beside them. A column that echoes the limit has recorded no result.
| Parameter | Release limit | Result column |
|---|---|---|
| PC by HPLC | ≥90.0% | A measured percentage, with the detector and the basis |
| Moisture | ≤1.0% | A measured percentage and the method |
| Acid value | ≤30 mg KOH/g | A measured figure |
| Peroxide value | ≤5.0 meq O2/kg | A measured figure |
| Heavy metals | Per element | A result for each metal, not one combined total |
| Microbiology | Counts and absence | Each count and each absence statement |
“Passes specification” should be something the reader can verify from the figures. For the oxidation lines it is worth seeing both the acid value and the peroxide value, because a lot can pass one and fail the other.
What moves between batches
Fractionation moves the PC figure and the class balance. The starting lecithin, the ethanol fractionation and the number of concentration steps decide how much PC is collected and how much PE, PI and PA remain. Drying moves the moisture; storage moves the acid value and the peroxide value; milling moves the particle size if the grade is a powder.
Colour follows the process and the oxidation state. White to light yellow is a wide window, and a shift inside it is not an identity failure. A lot that has darkened, or turned duller, can point to a longer heat hold, a different drying step or an oxidation product while the PC assay still passes.
Look at the direction across lots, not at one certificate. A PC figure drifting toward 90, an acid value climbing, or a peroxide value that has doubled across shipments says more than a single result at the centre of the range. The lot code printed on the certificate ought to appear on the pouch, the drum and the retained sample.
When an outside laboratory is worth using
An outside laboratory makes sense when the source is new, the market is new, the potency claim needs evidence the supplier's certificate does not carry, or a result is in dispute. The useful panel is built around the question rather than copied from the certificate.
For a potency question, ask for PC by HPLC with the chromatogram, the full phospholipid class profile, total phospholipids by phosphorus and the fatty acid profile by GC. For a condition question, ask for moisture, acid value, peroxide value and appearance. For a source question, add the sterol profile and the residual-solvent panel.
Each screen should come with its detection limit. “Not detected” says more about the method than about the lot unless that limit is printed. For a disputed lot, send the referee the retained sample, the supplier's certificate and the agreed specification, and ask for the discriminating tests rather than a second run of the same assay.
Comparing two suppliers
Set six items against each other: the PC figure and its method; the class profile; moisture, acid value and peroxide value; the source and the allergen statement; the heavy-metal and microbiological panels; and the pack and lot code. Agreement on the 90% headline is not agreement on the material if the detector, the basis or the source differs.
Traceability is the next question. The certificate should name who manufactured the lot, which lecithin it came from and which fractionation and drying steps were applied. The catalog specification sits on the phosphatidylcholine product page. The lecithin page shows the mixture this grade is fractionated from; the methods library explains the HPLC and phosphorus assays; the quality page sets out the release sequence. The grades page compares the potency and form options, and the identity page covers the source checks.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation