05 Compliance

The regulatory file for phosphatidylcholine

Technical document 05 · Reviewed 2026-11-19 · Phosphatidylcholine

On this page
  1. What the file contains
  2. European Union
  3. United States
  4. Contaminants and limits
  5. Label and claims
  6. Documents to keep with the lot
  7. Checklist before the first order

Phosphatidylcholine from soy is used as a food and supplement ingredient, and its regulatory file has to connect four things: the specification, the lot certificate, the destination route and the label. The supplier can document the material and the lot; the buyer's regulatory team decides the route for the market. A soy-derived lot also needs the allergen and GMO declarations that the destination requires.

In one line

The specification covers the material; the file proves the route, the contaminant limits and the soy declaration for the market.

What the file contains

Start with the material: which specification version, which plant source and which physical form. Then the lot: the certificate and the raw results behind it. Then the route: the instrument under which the ingredient or the finished product is placed on the market. Then the label: the ingredient name, the allergen and any claim. A folder that holds only the first two is a purchasing record, not a regulatory file.

The certificate describes the lot, the technical data sheet describes the specification, and the safety data sheet covers handling. None of the three settles the route. Keep the allergen, GMO, origin and residual-solvent statements in the same version-controlled set as the specification, and retire the old versions when the specification changes.

European Union

Regulation (EC) No 178/2002 provides the general food-law frame, Directive 2002/46/EC covers food supplements, Regulation (EU) No 1169/2011 governs labelling and Regulation (EC) No 1924/2006 governs claims. The buyer's regulatory team confirms the route for the destination member state and checks that the specification describes the material actually placed on the market.

Soy appears in Annex II of Regulation (EU) No 1169/2011. The exemption for fully refined soybean oil does not cover phospholipids, so a soy-derived PC must declare soy. A soy source can also raise a labelling question under Regulation (EC) No 1829/2003; that is a separate assessment from the allergen declaration.

If a soy-derived PC fraction is placed under the lecithin additive entry E322, authorised by Regulation (EC) No 1333/2008, Commission Regulation (EU) No 231/2012 supplies the purity criteria. That entry caps lead at 2 mg/kg, while the catalog here allows 3 mg/kg; where the additive route applies, the tighter figure governs. Whether a particular PC grade fits the E322 definition is for the buyer's regulatory team to decide. This page does not assert that the route is open for a given lot.

Great Britain and Northern Ireland are assessed separately. Great Britain uses the current GB register and GB labelling rules, while Northern Ireland follows the EU framework; the destination decides which applies.

United States

The US review starts with the dietary-supplement framework and the exact ingredient and intended use. The Supplement Facts panel follows 21 CFR 101.36, and dietary-supplement current good manufacturing practice sits in 21 CFR 111. The buyer's regulatory team confirms the basis the ingredient relies on and whether any premarket notification applies to the ingredient or the finished product.

Soy is a major food allergen under FALCPA, so a soy-derived PC must be declared; the highly refined oil exemption does not extend to a phospholipid ingredient. Structure/function wording is reviewed separately from the certificate and must be truthful and not misleading.

Contaminants and limits

The catalog limits are gates on the ingredient. The finished-product limit is a calculation from the daily dose, and the destination text decides it. In the EU, Regulation (EU) 2023/915, as of this review, sets maximum levels for lead, cadmium and mercury in food supplements; arsenic has no harmonised level there, so the customer or market limit governs. Check the current consolidated text before relying on a number.

Catalog contaminant limits and the finished-product check
ParameterCatalog limitWhat to keep on file
Lead (Pb)≤3 mg/kgLot result, method, and the finished-product calculation
Arsenic (As)≤2 mg/kgLot result and the agreed limit for the market
Cadmium (Cd)≤1 mg/kgLot result, plus any category exception for the market
Mercury (Hg)≤0.1 mg/kgLot result and method
MicrobiologyCounts and absenceThe count and the absence statement for the lot

Residual solvents sit outside the catalog panel. Where the extraction route uses ethanol or hexane, ask for the statement and the limit behind it, and keep it with the lot file.

Ask for each metal separately. A combined “heavy metals” total hides which element drove the figure, and a “not detected” line needs its detection limit to mean anything.

Label and claims

The label states the ingredient name, the amount and the source. A PC claim is a claim on the PC figure, a lecithin claim is a claim on the mixture, and a choline claim is tied to the choline content of the finished product and its own conditions. Those are three different label calculations.

No disease-related claim is made here, and a certificate does not authorise one. The brand's reviewer checks the wording against the product, the form and the market; that review is separate from the specification and from the lot release.

Documents to keep with the lot

The lot file should hold the specification version, the COA, the technical data sheet, the safety data sheet, the soy allergen statement, the GMO or non-GMO statement, the origin record and the residual-solvent declaration. Add an E322 compliance statement where that route is used, and any halal or kosher certificate the market needs. Each document should carry a date and a version, and any gap should be identified before the order rather than at the port.

Checklist before the first order

  • The specification names the CAS number, the plant source and the physical form.
  • The PC method, detector and basis are written down.
  • The COA, TDS, SDS, allergen, GMO, origin and solvent statements are on file.
  • Each contaminant result is carried through to the finished-product dose.
  • The label declares soy where the material is soy-derived, and the claim has been reviewed.
  • The source, process and pack sit under change control.

The product hub carries the catalog specification; the lecithin page covers the mixture; the COA page explains the lot certificate. The identity page covers the source evidence, the methods library describes the assays and the quality page sets out the release file.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation