04 MOQ & ordering

MCT oil: MOQ, packaging and ordering

Technical document 04 · Reviewed 2026-11-20 · MCT Oil

On this page
  1. Why the minimum is 1 kg
  2. Packs and formats
  3. Lead time and dispatch
  4. What a quotation needs
  5. The sample is a packed lot
  6. Terms to settle before the first order

MCT oil is packed in a 1 kg HDPE bottle and a 25 kg HDPE drum, and the minimum order is one bottle. Standard packs leave within 1–7 days of order confirmation. A firm quotation needs the C8/C10 ranges, the free-fatty-acid basis, the quantity and pack, the destination and Incoterm, the document set and where the oil will be used.

In one line

One kilogram is the smallest unit that can be sealed, sampled and traced as a single lot; the drum changes the handling and the headspace, not the specification.

Why the minimum is 1 kg

The bottle is the qualification unit. One kilogram covers a bench trial, a retained sample and an independent test, and it flies without a pallet. It is filled and sealed as a lot, so the code on the label belongs to that oil rather than to a drum someone scooped from.

Below a kilogram the oil is decanted from a larger lot, which adds handling and breaks the link between the pack and the original lot. The drum is the production unit: fewer containers per tonne, but a bigger headspace and a longer open life. A buyer who needs 2 kg is better served by two bottles and one unopened reserve than by a drum that stays half empty.

The minimum is therefore a packing fact. It is not a volume incentive, and it is not a statement about the commercial terms of the oil.

Packs and formats

Standard MCT oil packs
PackNet weightTypical useNotes
HDPE bottle1 kgTrial, sample, small batchInduction seal; close after pouring; keep in the dark
HDPE drum25 kgProductionLarger headspace; note the date of first opening
Nitrogen-blanketed drum25 kgLong storageOn request; protection ends when the drum is opened
Split pack1–5 kgBench workDecanted from a bulk lot; carries its own code

Both standard packs are food-grade HDPE. The plastic keeps water out and lets light through, so the drum belongs in a dark store, and the closure is the part that fails first. Check the liner and the seal on arrival: an oil pack opened in transit is no longer a sealed lot.

The catalog form is oil. A carrier-borne powder has its own specification and is not a packing option; the carrier form is specified on the MCT powder page.

Lead time and dispatch

Standard packs are dispatched 1–7 days after order confirmation. The clock covers picking, paperwork and handover to the carrier, not the transit, the customs entry or the customer's own release. A nitrogen-blanketed drum or a split pack is scheduled separately.

Ask for a dispatch date rather than the range. The bottle usually travels as a parcel and the drum on a pallet, and the Incoterm decides who books the freight and who handles customs entry. Send the COA and the other lot documents with the consignment rather than after it.

What a quotation needs

Six details turn a quotation into something two suppliers can be compared on:

  1. The cut. Medium-chain triglycerides, CAS 73398-61-5, with C8 and C10 written as ranges.
  2. The test basis. Free fatty acid with its reference acid, peroxide value, moisture, metals and microbiology.
  3. The pack. 1 kg bottle, 25 kg drum, nitrogen-blanketed drum or split.
  4. The route. Destination country, port or address, and the trade term.
  5. The paperwork. COA, specification, SDS, source and allergen statement, and any market-specific document.
  6. The use. Supplement, food or another application, and the country where the finished product will be sold.

A quote that leaves out the reference acid or the market cannot be compared with another. Commercial terms belong on the quotation itself, not on this page.

The sample is a packed lot

The bottle is the sample. Run the GC profile, free fatty acid, peroxide value and moisture on it before committing to a scale-up, and keep part of the same pack as the retained sample. The lot code should follow the sample, the COA and the quotation; a sample without a code is a demonstration.

A trial that needs only 200 g will be decanted from a bulk lot. That is a legitimate service, but it is a repack: ask for it in writing and keep the split's lot code with the trial data, because the bench oil and the production oil may not share a lot even when the specification reads the same.

Terms to settle before the first order

Settle the commercial and the quality terms in one document: Incoterm, pack, dispatch window, specification revision, a COA for every lot, a retained sample, the retest period and the notice required for a source or fractionation change.

If a lot fails the agreed specification, the evidence is a re-test of the retained sample against the named method; a photograph of the drum is not evidence. Name the referee laboratory and say who pays for it before the first order, because a dispute is the wrong moment to negotiate either.

Specifications are listed on the MCT oil product page; the release tests are described on the COA page; the carrier form is on the MCT powder page; the glossary explains what MOQ means; the quality page sets out how a lot is released; the methods section describes the analytical tests.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation