03 Stability

Microencapsulated DHA is protected, not immune; oxidation decides the shelf life

Technical document 03 · Reviewed 2026-11-19 · DHA Powder

On this page
  1. The powder in its pack
  2. In dispersion and in the formula
  3. What actually moves the result
  4. The stability protocol
  5. Formulation and packaging
  6. How shelf life is assigned

Microencapsulation slows oxidation; it does not stop it. The starch wall limits the oil's contact with air and light, but the oil inside still reacts with oxygen and moisture, and peroxide value and p-anisidine value are the figures that show it. The catalog limits are peroxide value ≤5.0 meq/kg and p-anisidine value ≤20.0, and a shelf life has to be demonstrated on the grade and the pack.

In one line

The wall slows the reaction; it does not stop it, so shelf life is set by the oxidation state of the oil and the barrier of the pack.

The powder in its pack

Sealed in a foil pouch or a lined drum, the powder is stable enough for commercial handling. The weak point is the seal and the headspace. Oxygen trapped in the pouch starts the reaction, and moisture that enters after opening raises the water content of the starch matrix. The catalog limit for moisture is ≤5.0%; a powder near that ceiling has less distance to caking and hydrolysis than one at 2%.

Caking and loss of flow are the visible effects. Colour and odour are the chemical ones: a white to light yellow powder that darkens or develops a fishy, paint-like or cardboard note is showing oxidation that the DHA assay may not reflect. The assay measures the fatty acid, not its condition. Bring the pack to room temperature before opening so condensation does not form on the powder, and close it promptly after weighing.

Temperature acts even in a sealed pack. Reaction rates roughly double for every 10 °C, so a drum stored against a warm wall ages faster than the same drum in a cool store. The storage condition belongs in the specification and on the label, not only in the warehouse procedure.

In dispersion and in the formula

The powder is dispersible, not soluble. In a stick or a drink mix it clouds the liquid and will settle unless the formula keeps it suspended. In a wet matrix the encapsulated oil is exposed to water, oxygen and often heat; high-shear mixing can whip air into the dispersion and raise the peroxide value. A nitrogen blanket, a deaerated process and a low-shear transfer reduce that exposure.

Trace metals matter at low levels. Iron and copper catalyse lipid oxidation, so the water and the other ingredients should be checked as well as the powder. An acidic or alkaline pH accelerates hydrolysis of the oil, and a high water activity makes the starch wall plastic and more permeable. A cool, neutral, low-water-activity matrix is the easier environment.

Antioxidants slow the change but do not reverse it. The powder already carries a declared antioxidant; adding another to an oxidised lot does not restore the peroxide value. The antioxidant has to be shown to work in the real matrix, not assumed from another product, and it has to appear on the label.

What actually moves the result

Stability factors · microencapsulated DHA powder
FactorEffectControl
OxygenPeroxide value rises; off-notes developSealed pack, nitrogen headspace, low-shear handling
MoistureCaking, hydrolysis, higher water activityFoil laminate, sealed liner, desiccant, dry room
HeatFaster oxidation and hydrolysisCool store, cool process, short heat exposure
LightPhoto-oxidation, colour driftOpaque pack, foil or amber secondary
Iron and copperTrace-metal catalysisSpecification limits, equipment check, ingredient screen
Mechanical shearWall damage, oil release, faster oxidationLow-shear mixing, controlled conveying
TimeSlow change even in a good packReal-time data, retest or expiry date

The stability protocol

The bulk study keeps the powder in its commercial pack at 25 °C/60% RH and at 40 °C/75% RH, with pulls at the start and then at 3, 6, 12 and 24 months. The warm leg is an accelerated condition, not a storage instruction; it exists to make a trend appear inside the study window. Test DHA by GC, peroxide value, p-anisidine value, moisture, appearance and microbiology at each pull, and add the fatty-acid profile where the method allows it.

Peroxide value is the early indicator, but read it with care. Hydroperoxides are intermediates: they rise, then decompose into aldehydes and other secondary products, so a peroxide value that falls late in the study can mean the oil has moved past the hydroperoxide stage rather than recovered. p-Anisidine value, colour, odour and the DHA figure tell the rest of the story. A specification that tracks only DHA and peroxide value can miss the secondary change.

The finished-product study runs alongside, not instead. The capsule, tablet or stick goes into its own pack at 30 °C/65% RH and 40 °C/75% RH and is tested for DHA, peroxide value, p-anisidine value, moisture, colour and taste where it applies. Bulk powder can pass while the finished product fails, and the finished product is what carries the date.

Formulation and packaging

Capsules and tablets shield the powder from water and light; the remaining risks are the excipients and the process. A direct-compression blend with a hygroscopic carrier needs a dry room and controlled dwell time. A tablet coating adds a barrier but also adds heat, so the coating step belongs in the trial.

Sticks depend on the seal. A foil laminate with a continuous seam and a low moisture-vapour transmission rate is the baseline; a clear or paper format is a marketing choice that needs its own data. Nitrogen flushing the headspace is worth asking for on a lipid powder, and the pack should be rigid enough that the powder does not abrade the seam in transit.

A beverage is governed by pH, heat and dissolved oxygen. Add the powder at the coolest point that still disperses it, keep dissolved oxygen low, and check the peroxide value after the process rather than only on the raw material. In a drink mix the powder is consumed quickly once dispersed, but the stick still needs a moisture barrier for its own shelf life.

How shelf life is assigned

A shelf life is a conclusion from data on the grade and the pack, not a property of the chemical name. The specification should state the storage condition and the retest or expiry period the study supports. Bulk material that will be re-tested before use can carry a retest period; a consumer pack needs a date the shopper can read.

Where the pack or the matrix has not been studied, the defensible answer is a shorter period or a new study. A 24-month figure borrowed from another pack proves nothing about this pouch, drum or stick. Ask for the study behind the number, the conditions, the parameters and the lots covered; a shelf life without that file is a guess with a date on it.

The COA page lists the parameters that are followed over time. The packs and the ordering unit are on the MOQ page; the DHA powder hub carries the catalog specification; the grade page explains why the powder and the oil need separate studies. The quality page explains how stability data and retained samples are held.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation