DHA powder or DHA oil: choosing a grade
DHA powder and DHA oil carry the same fatty acid in different packages. The powder is an oil dispersed in a starch matrix and standardised to 10% DHA, so a dose weighs more; the oil is a concentrated liquid, so a dose weighs less. The choice is set by the dosage form, the dose per unit and the label, not by the DHA molecule.
The form decides how much material carries the dose and how much protection the oil has, while the DHA figure alone does not.
Two forms, one fatty acid
DHA is a long-chain fatty acid with six double bonds. In a powder it sits inside an oil droplet, and the droplet sits inside a starch matrix; in an oil it is the continuous liquid. The chemistry that oxidises is the same in both. What changes is the surface the oil exposes, the amount of non-DHA material that arrives with each gram, and the process the material can survive.
The catalog grade is a microencapsulated powder at 10% DHA, 40 mesh, with modified starch and an antioxidant declared. A 20% powder is available on request and carries its own specification. The oil form is a separate material with a different DHA concentration and no carrier; it should not be ordered by asking for “the same thing as a liquid”.
The comparison that matters
The first number to compare is DHA per gram of material, because that number sets the fill weight. The second is the protection the form gives the oil, because that number sets the shelf life. The third is the label, because the carrier and the source belong on it.
| Line | DHA powder 10% | DHA oil, concentrated |
|---|---|---|
| DHA per gram | About 100 mg | About 350–400 mg at 35–40% DHA |
| Material per 250 mg DHA | About 2.5 g | About 0.6–0.7 g |
| Physical form | Free-flowing powder, 40 mesh | Liquid at room temperature |
| Carrier | Modified starch and antioxidant | None; antioxidant may be added |
| Oil exposure | Encapsulated, lower surface area | Bulk liquid, larger surface area |
| Usual formats | Sticks, sachets, tablets, capsules, dry blends | Softgels, liquid capsules, emulsions |
| Label declaration | Powder, starch, antioxidant, source | Oil, antioxidant if used, source |
The oil figures are arithmetic for comparison, not a catalog grade. A concentrated oil at 40% DHA is a different raw material with its own peroxide value, p-anisidine value and source; ask for those before using the conversion in a formula.
Flow, dispersion and fill
The powder is dispersible, not soluble. In water it clouds the liquid and will settle unless the formula keeps it suspended; that is normal for an encapsulated oil, and a clear drink is the wrong target. The 40 mesh cut gives a powder that flows in a stick line and blends into a dry mix, but it is not dust-free, and the starch matrix takes up moisture when the seal is broken.
The oil is easier to weigh into a softgel or an emulsion and harder to keep out of the air. It wets equipment, needs a nitrogen blanket or a closed transfer where the process allows, and can migrate into a capsule shell or a sachet seam. A powder spill is swept; an oil spill is a cleaning and an oxidation-exposure event.
Capsule fill is the practical constraint. A 500 mg capsule cannot hold 2.5 g of powder, so a 250 mg DHA dose from the 10% grade means several capsules or a stick. The oil puts the same dose into one softgel. If the format is a capsule and the dose is high, the oil usually wins on fill weight; if the format is a dry stick or a tablet, the powder usually wins on handling.
Dose, overage and the label
Dose is a label decision, not a property of the raw material. Calculate from the assay: grams of powder = target DHA ÷ 0.10; grams of a 40% oil = target DHA ÷ 0.40. Use the lot result rather than the catalog minimum for the calculation, and add the manufacturing overage only after the process loss is measured. An overage declared as DHA on the label still has to be true at the end of shelf life.
The label follows the form. A powder contributes its starch and antioxidant to the ingredient list; an oil contributes only the oil and any antioxidant. If the front of the pack carries a DHA amount, the back needs the nutrition declaration and the quantitative ingredient declaration that the market requires. The source — algal or fish — should be named, because the allergen statement and the regulatory route follow it. The catalog entry does not fix the source, so the specification has to.
Writing the grade into the specification
For the powder, write: “Microencapsulated DHA powder, 10% DHA (GC), [source] oil, carrier modified starch, antioxidant [name], ≥95% through 40 mesh.” Then add DHA ≥10.0%, EPA reported, moisture ≤5.0%, peroxide value ≤5.0 meq/kg, p-anisidine value ≤20.0, the heavy-metal and microbiology panels, and the allergen statement. State the assay basis and the oil load.
For the oil, write the DHA concentration and the EPA figure, the triglyceride or ethyl-ester form, the source, the antioxidant, peroxide value, p-anisidine value, moisture and the contaminant panel. Do not carry the powder's starch line into an oil specification, and do not carry the oil's clarity expectation into a powder one.
When the other form is the better fit
Choose the powder when the format is dry, when the dose per unit is modest, when a tablet or a stick needs a free-flowing ingredient, or when the project wants the oil in a matrix that limits its exposure. Choose the oil when the dose per unit is high, when a softgel or a liquid capsule is the format, or when the carrier load cannot be accommodated in the serving size.
Do not switch forms late as a sourcing decision. A switch changes the fill weight, the capsule size, the label, the allergen statement, the oxidation data and often the stability study. It is a reformulation, and it belongs in change control. The powder-versus-oil page works through the dose and label arithmetic; the COA page lists the tests that both forms need; the compliance page sets out the source and allergen file. The catalog specification is on the DHA powder hub, and the mesh and flow terms are defined in the particle-size glossary entry.
In this document
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation