04 MOQ & ordering

DHA powder: MOQ, packaging and ordering

Technical document 04 · Reviewed 2026-11-19 · DHA Powder

On this page
  1. Why 1 kg is the first unit
  2. Packaging options
  3. Lead time and what moves it
  4. What a quotation needs
  5. Samples
  6. Order terms to settle before the PO

The minimum order is 1 kg, packed in a foil pouch, with a 25 kg fiber drum for larger quantities and a 1–7 day lead time from a released lot. One kilogram is enough for a bench trial, a label trial and a first stability pull, but it is a qualification unit, not a production run. The order is shaped by the pack, the documents and the destination as much as by the quantity.

In one line

One kilogram from a released lot is the qualification unit; the pack, the documents and the destination shape the order.

Why 1 kg is the first unit

A 1 kg pouch of 10% powder carries about 100 g of DHA. That is enough to run a formulation trial at a realistic dose, fill a small batch of capsules or sticks, and put a sample into a stability chamber. It is not enough to validate a production line or to cover a launch, and it is not meant to be: the first order is there to qualify the material before the quantity grows.

The pouch is drawn from a released lot, so the batch COA describes the material in the sample. That link matters more than the pack size. A sample from a development batch, or a pouch filled from a different lot than the drum that follows, breaks the chain between the trial and the commercial supply. Ask for the lot code on the pouch, the certificate and the retained sample to match.

The 25 kg drum is the next step. It covers a pilot run, a small commercial batch or a stability study with spare material. The drum is not simply 25 pouches: it has one lot and one certificate, and it should be opened and closed under a controlled procedure so the whole drum does not take up moisture at once.

Packaging options

Catalog packs · microencapsulated DHA powder 10%
PackNet weightTypical useHandling
Foil pouch, heat-sealed1 kgSample, bench trial, first stability pullReseal after opening; keep dry; use the whole pouch where possible
Fiber drum25 kgPilot batch, small commercial runOpen in a dry area; reseal between withdrawals; do not store open

Both packs are barriers, not guarantees. A foil pouch protects the powder while the seal is intact; a drum protects it while the closure is sealed. Neither can protect a powder that is left open in a humid room. The storage condition in the specification applies to the pack as supplied, so transfer to a different container is a change the buyer owns.

Lead time and what moves it

The catalog pack is quoted at 1–7 days from a released lot. That window covers picking, the certificate, the export documents and the handover to the carrier; transit time is separate and depends on the destination and the service. Ask for the dispatch date rather than a delivery estimate if the trial date is fixed.

Several things move the date: a request for 20% powder, an agglomerated grade, a custom mesh, a specification change, an extra test or a destination that needs a particular document. A change to the specification after the lot is released is a new release, not a paperwork update. Build the review time into the trial plan, especially for a first shipment into a regulated market.

What a quotation needs

A useful quotation is a short technical document, not a number in an email. Give the supplier these six items and ask for each one to be confirmed back.

Six details that turn an enquiry into a comparable quotation
DetailWhat to stateWhy it changes the offer
Identity and sourceDHA powder 10%, oil source, intended marketThe source drives the allergen and the regulatory file
SpecificationDHA, EPA, moisture, PV, p-AV, mesh, carrier and micro limitsThe grade and the test panel decide the release
Quantity and pack1 kg pouch, 25 kg drum or bothThe pack and the lot split decide the dispatch
DestinationCountry, port or address, IncotermDocuments, transit and responsibility change
DocumentsCOA, TDS, SDS, source and allergen statement, stability dataA missing document can hold the shipment
DeviationsAny tighter or additional test, and the acceptance limitA non-catalog test is a new release condition

Samples

A sample is drawn from a released lot and ships with its certificate. State the amount needed and what it is for: a bench trial, a sensory trial, a stability pull or a customer's own approval. A bench trial and a stability pull need different amounts, and a stability pull needs enough material for every time point plus a retained portion.

A sample is not a substitute for the specification. The sample shows how the powder flows and disperses; the specification and the COA show what the lot is. If the sample passes but the certificate is generic, the trial has qualified a powder that may not be the powder in the drum. Ask for the lot code and keep the retained sample.

Order terms to settle before the PO

Settle the commercial terms in writing: quantity and pack, Incoterm, payment terms, dispatch window, shelf life or retest date, document set and the change-control route. The specification, not the email thread, should be the document that the certificate is checked against, and the revision number should appear on both.

The catalog limits and the tests are on the COA page; the documents a regulated market needs are on the compliance page; the pack's effect on shelf life is on the stability page. The ordering terms are defined in the MOQ glossary entry and the retained-sample entry, and the catalog specification sits on the DHA powder hub.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation