Microencapsulated CLA is protected, not immune; oxidation decides the shelf life
The starch wall limits the CLA oil's contact with oxygen and light; it does not stop heat. A powder can pass its 10% assay while its peroxide value climbs, so shelf life is set by the oxidation figures, the moisture and the pack, not by the assay. The stability file has to show the powder in its commercial pack, at stated conditions, for the period claimed.
Microencapsulation slows oxidation; it does not stop it, so the shelf life is set by the peroxide and anisidine values, not by the CLA assay.
The dry powder is the protected state
In the dry powder, the oil sits in droplets inside a starch matrix, and the matrix limits the oil's contact with air. That is a barrier, not a seal. Oxygen permeates the starch and the pack, and the oil at the particle surface is already exposed before the powder is opened. Moisture matters because water softens the matrix, promotes caking and can carry oxygen and metals into the oil phase. The catalog moisture limit is ≤5.0%; water activity tells you more about caking and stability than the moisture percentage alone.
Free oil, or surface oil, is the fraction outside the wall. It oxidises first and it is not a standard line on the catalog certificate. A powder can meet its peroxide limit on release and still have a high surface-oil fraction that shortens the usable life in a warm warehouse. Ask for surface oil, bulk density and water activity when the formula is sensitive to oxidation or when the powder will be stored in a warm climate.
Caking is a physical failure: absorbed moisture can form lumps that no longer disperse even when the CLA and peroxide results pass.
Once dispersed, the protection is gone
The powder is dispersible, not soluble. In water, the starch matrix hydrates and the oil droplets are exposed to a water phase, dissolved oxygen and any metal ions in the mix. Oxidation that was slow in the dry powder accelerates in a slurry or a beverage. A drink mix should be consumed soon after preparation, and a wet slurry should not be held in a tank over a shift.
The dosage form sets the exposure. A capsule keeps the powder dry and shields it from light, so the capsule shell and the fill blend matter more than the water phase. A stick is dry until the consumer opens it, but it is hygroscopic once opened. A beverage is the hardest case: water, oxygen, possibly a heat step and a large interface. A tablet adds compression heat and can express surface oil; a gummy adds water activity and a warm holding step.
What drives the oxidation
| Factor | What it does | Control |
|---|---|---|
| Heat | Raises the rate of peroxide formation and aldehyde production | Cool storage; low drying temperature; short heat exposure |
| Light | Accelerates lipid oxidation, especially at the surface | Opaque pouch or drum; dark storage |
| Oxygen | Feeds hydroperoxide formation | Barrier pack; minimal headspace; nitrogen flush if offered |
| Moisture | Softens the matrix, promotes caking and mobilises metals | Moisture barrier; desiccant if needed; reseal after opening |
| Trace metals | Catalyse oxidation at low concentrations | Specify and test the metals; avoid iron and copper contact |
| Surface oil | Exposes unprotected oil from the start | Ask for surface oil; keep the oil load within the process capability |
The antioxidant slows the chain reaction; it does not restore oil that has already oxidised, and it is not a substitute for a barrier pack. The antioxidant is declared on the specification, and the declaration should name it rather than say only “antioxidant”.
A stability protocol for the powder
| Condition | Timepoints | Tests |
|---|---|---|
| 25 °C / 60% RH, commercial pack | 0, 3, 6, 12, 18, 24 months | CLA, isomers, PV, p-AV, moisture, appearance, micro |
| 30 °C / 65% RH, commercial pack | 0, 3, 6, 12 months | CLA, PV, p-AV, moisture, caking |
| 40 °C / 75% RH, accelerated | 0, 1, 3, 6 months | CLA, PV, p-AV, moisture, surface oil |
| Open pouch, 25 °C / 60% RH | 0, 1, 2, 4 weeks | Moisture, PV, p-AV, flow, dispersion |
| Finished form (stick, capsule, beverage) | 0, 3, 6, 12 months | CLA, PV, p-AV, sensory, micro |
The commercial pack is part of the test. A powder that is stable in a glass jar is not evidence for a foil pouch or a fiber drum with a liner. The accelerated condition is a screening tool; it supports a shelf life but does not replace real-time data at the storage condition the label states. For a hot, humid market, add a condition at 30 °C / 75% RH and read the moisture and caking results as carefully as the peroxide value.
Test the isomer ratio as well as the total; a ratio outside its specification is an identity failure.
The finished formula changes the answer
A capsule or tablet is a dry matrix, and the main risks are the compression step, the surface oil and the shell or excipient chemistry. A stick or drink mix is dry in the pack but wet in use, so the consumer's preparation matters. A ready-to-drink beverage is the most exposed: water, dissolved oxygen, pH, heat and metal ions from the process all act on the oil. The powder's stability data do not transfer automatically to any of these; each form needs its own study.
An overage is a formula decision, not a substitute for stability. If the label figure has to hold at the end of shelf life, the overage and the peroxide limit belong in the formula specification, supported by the study. Adding more powder to compensate for a rising peroxide value makes the oxidation worse, because more oil means more substrate.
How the shelf life is assigned
A shelf life is a date assigned to a pack under stated storage conditions. It is not a property of the CLA molecule. The assignment should come from real-time data on the commercial pack, with the accelerated arm as support, and it should name the storage condition and the tests that defined the end point. A CLA powder can fail on peroxide or p-anisidine value before the CLA assay moves, so the end point has to include the oxidation figures.
Once a pouch is opened, the clock changes. The powder picks up moisture and oxygen every time it is opened, so the label should give an in-use period and a resealing instruction. Retest after storage is not a licence to extend the date without data. The COA page lists the oxidation lines, the MOQ page describes the packs, and the CLA powder hub carries the catalog specification. The moisture term is defined in the loss-on-drying glossary entry, and the quality page explains how stability data and retained samples are held.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation