CLA 10% or 20%: choosing a powder grade
The catalog grade is a 10% CLA powder at 40 mesh; a 20% nominal grade and an agglomerated version are available on request. Moving to 20% halves the powder needed for a given CLA figure, but it also roughly doubles the oil the starch has to hold, which changes flow, dispersion and the oxidation load. The grade is a specification decision before it is a label decision.
The grade sets how much oil the starch has to carry, and the oil load decides the powder weight, the flow and the oxidation risk.
Why there is more than one grade
A microencapsulated CLA powder is a starch matrix holding oil droplets. Two numbers describe it: the CLA content on the certificate and the oil load, the total oil the matrix carries, of which CLA is only a part. A 10% CLA powder therefore carries more than 10% oil. Change either number and you have a different powder, even when the product name looks the same.
The 10% grade at 40 mesh is the standard because it is the easiest to dry, mill and blend. A 20% grade concentrates the oil, so less powder carries the same CLA, but the matrix has more oil to hold and less starch per gram to protect it. An agglomerated grade keeps the CLA content of its base powder and changes the particle size, wetting and dust. These are three process routes, not one product with three labels. Each needs its own specification, certificate and stability file.
10%, 20% and agglomerated side by side
| Line | 10% at 40 mesh (catalog) | 20% nominal (on request) | Agglomerated (on request) |
|---|---|---|---|
| CLA by GC | ≥10.0% | 20% nominal; range agreed | As the base grade |
| Powder per 100 g CLA | 1,000 g | About 500 g at 20% nominal | As the base grade |
| Oil load | Higher than the CLA figure; ask for the value | Higher again; ask for the value | As the base grade |
| Particle size | ≥95% through 40 mesh | Agreed for the grade | Agglomerated; size agreed |
| Flow and dust | Free-flowing; some dust | More oil; check caking and flow | Low dust; wets quickly |
| Oxidation check | PV, p-AV, moisture | PV, p-AV, surface oil | PV, p-AV after agglomeration |
| Typical format | Capsules, sticks, blends | Compact capsules, small sticks | Stick packs, drink mixes |
| Specification | Catalog limits | Written for the grade | Written for the grade |
The arithmetic is the first check. At a 500 mg CLA label figure, a 10% powder needs 5 g and a 20% grade about 2.5 g; at 1 g CLA, 10 g and about 5 g. The 10% grade is often the right choice for a stick or a blend where powder weight is not tight; the 20% grade is the choice when the fill weight is tight, provided the matrix can hold the oil and the oxidation data support it.
The second check is the label. The carrier and the antioxidant are ingredients and have to be declared, and the oil load drives the fat figure in the nutrition declaration. A grade with more oil per gram of CLA puts more fat into every serving. If the label figure is built around powder weight rather than CLA weight, a grade change can move the declared CLA without changing the serving size.
What the powder does on the line
The catalog mesh is 40, about 425 µm. At least 95% of the powder passes that sieve, so the grade is a coarse powder rather than a fine flour. Coarse particles flow better and dust less; finer particles disperse faster but can hang in a hopper and cloud a room. The mesh travels with the grade and should be written into the specification, not left as a note.
A higher oil load makes the powder more cohesive and more likely to cake. Oil can migrate to the particle surface, where it is exposed to oxygen and feels greasy. That surface oil is not a standard line on the catalog certificate, but it is the first thing to ask about when a 20% grade is proposed for a long shelf life. Bulk density, flow and wettability are also not on the certificate; ask for them on the grade you will receive.
The powder is dispersible in water, not soluble. In a stick or a drink mix it clouds the liquid and can ring the glass; in a capsule or tablet the powder is shielded from water, and the grade question becomes fill weight and flow. Agglomeration improves wetting and reduces dust, but adds a process step and its own particle-size specification.
Matching the grade to the dosage form
Capsules are limited by fill weight. A 500 mg capsule of a 10% powder carries about 50 mg CLA; the same capsule of a 20% powder carries about 100 mg. If the label figure cannot be reached inside the capsule, the grade or the format has to change. Tablets add compression: a high oil load can soften the tablet and express oil onto the punch, so a 10% grade is often easier to compress than a 20% one.
Sticks and drink mixes have more room. A 5 g stick of a 10% powder carries about 500 mg CLA, which is a normal powder weight for a stick; a 20% grade would halve the powder and leave room for other ingredients. The trade-off is dispersion and taste: more oil per gram can make the powder harder to wet and more noticeable in a clear drink.
How to write a grade specification
Write the grade as a full identity: “Microencapsulated CLA powder, 10% total CLA by GC, isomer ratio declared, oil load declared, carrier modified starch with antioxidant, ≥95% through 40 mesh, moisture ≤5.0%, peroxide value ≤5.0 meq/kg, p-anisidine value ≤20.0, heavy metals and microbiology as listed.” A 20% or agglomerated grade gets its own CLA range, oil load, mesh and oxidation limits; do not copy the 10% limits across.
Name the source oil and the antioxidant, not only the carrier class. The starch can come from different botanicals, and the antioxidant can be tocopherols, rosemary extract or ascorbyl palmitate; each has its own label and allergen consequences.
Ask for the certificate on the exact grade and lot. A 10% certificate does not describe a 20% powder, and a milled certificate does not describe an agglomerated one. The COA page lists the certificate lines, the stability page covers the oxidation data a grade change needs, and the isomer page explains why the ratio is a separate decision from the percentage.
When a different grade is the wrong answer
If the formula needs a clear solution, no CLA powder grade will deliver it; the ingredient is a dispersion. If the label names one isomer, changing the percentage does not fix the ratio. If the capsule is already at its fill limit, a lower grade makes the problem worse, and a higher grade may not fit the oil load the matrix can protect. The catalog specification, packs and MOQ are on the CLA powder product page; mesh size is defined in the particle-size glossary entry.
In this document
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation