01 COA & batch testing

What the COA for CLA oil actually contains

Technical document 01 · Reviewed 2026-11-20 · CLA Oil

On this page
  1. What the certificate reports
  2. The three bases behind one figure
  3. The limit and the result
  4. What moves between lots
  5. When an outside test earns its place
  6. Comparing two suppliers

A CLA oil certificate reports the CLA figure by gas chromatography, the share taken by the two main isomers, free fatty acid, peroxide value, moisture, heavy metals and microbiology, each line beside its method. The CLA result needs a stated basis, because a percentage of total fatty acids and a percentage by weight of oil are not the same number, and the certificate should also name the esterified form. The limits below are the catalog specification; the batch COA confirms a pack.

In one line

The CLA percentage only compares across lots when the certificate states its basis, the isomer pair and the esterified form beside it.

What the certificate reports

Every line needs the measured quantity, the method that produced it, and the limit the lot was released against. The identity row and the CLA row answer different questions — whether the oil is conjugated, and how much CLA it carries.

Release lines on a CLA oil certificate
ParameterMethodRelease limit
AppearanceVisualClear to slightly hazy oil
IdentificationGC profile against a referenceProfile conforms
CLA contentGC of fatty acid methyl esters70.0–80.0%
cis-9,trans-11 + trans-10,cis-12GC with isomer resolution≥90.0% of CLA
Free fatty acidTitrimetric≤0.50%
Peroxide valueIodometric≤5.0 meq O₂/kg
MoistureKarl Fischer≤0.1%
Heavy metalsICP-MSPb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg
MicrobiologyPlate count and absence testsAPC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent

A CLA concentrate is a family of positional and geometric isomers, and the two named here are the ones specifications list. A certificate with the total and no split has left the rest open.

The three bases behind one figure

The commercial CLA figure is a percentage of total fatty acids. The laboratory transesterifies the oil, separates the methyl esters on a capillary column and normalises the peak areas, so the result describes the fatty-acid pool rather than the oil as weighed. In a triglyceride the glycerol backbone is roughly 5% of the mass, so an 80.0% fatty-acid figure is about 0.76 g of CLA per gram of oil. If the material is free fatty acids the glycerol is absent and the two figures converge, which is one more reason the form belongs on the certificate.

“≥90.0% of CLA” has a basis of its own: it is a share of the CLA pool, not of the oil. At the top of the range the two isomers together are at least 72 percentage points of the oil's fatty acids; at the bottom, the same 90% is 63 points. A certificate that reports the pair against the oil and one that reports it against CLA describe different quantities and read alike.

Free fatty acid is the third basis. The ≤0.50% limit describes the unesterified fraction, and it is a clue to the form rather than a substitute for naming it: a CLA supplied as free fatty acids carries an acid value of a different order. Ask which form the lot is in and write the answer beside the CLA range.

The label calculation uses all three: take the CLA figure, identify its basis, apply the glycerol correction if the oil is a triglyceride, multiply by the fill weight. Written down once, that arithmetic stops a label declaring 80% from sitting on a fill that delivers 76%.

The limit and the result

A release limit is the boundary a lot must sit inside; the batch result is the figure the bench produced. Both belong on the page, in separate columns.

The result column, line by line
ParameterRelease limitWhat the result should show
CLA content70.0–80.0%The percentage with its basis and column
Isomer pair≥90.0% of CLAThe two isomers, their sum and the split
Free fatty acid≤0.50%The percentage and its expression basis
Peroxide value≤5.0 meq O₂/kgThe number, which measures oxidation already taken up
Moisture≤0.1%The percentage by Karl Fischer
Heavy metalsPer elementA figure in mg/kg for each element, never a sum

“Passes specification” is a conclusion the reader should reach from the numbers. With peroxide value the distance from the limit is the useful part: a lot at 4.8 meq O₂/kg is inside a ≤5.0 limit and has already spent most of its oxidation allowance. A sum of heavy metals hides the element that matters.

What moves between lots

The CLA figure is a reaction yield, not a constant. Alkali isomerisation of a linoleic-rich oil converts linoleic acid into the conjugated isomers, and the conversion, the catalyst and the hold time decide where in the window a lot lands. Two released lots can be more than 14% apart in CLA per gram, a fill-weight question for a softgel line even when both meet the specification.

The isomer split moves too. A process run hotter or longer returns a different pair, and the two named isomers do not behave identically in a formula. A shift inside the 90% gate is not a release failure, but it is worth a question when the formula was built on one distribution.

Oxidation values move with refining and storage. Deodorisation lowers peroxide value, then the pack decides how fast it climbs back; free fatty acid follows moisture. Colour and clarity follow that history, so a duller batch can be older or differently refined.

When an outside test earns its place

An outside test pays on a new source, a first consignment into a regulated market, an unnamed form, or a contested result. Do not repeat the whole certificate: the panel worth ordering is gas chromatography with the chromatogram for the profile and the isomer split, peroxide value, free fatty acid, moisture, ICP-MS for the metals and microbiology. The isomer separation needs a long bis-cyanopropyl polysiloxane column and a report that shows the two isomers resolved.

Add the process-contaminant panel for a refined oil — 3-MCPD and its fatty acid esters, glycidyl fatty acid esters, polycyclic aromatic hydrocarbons and pesticides — plus a mineral-oil hydrocarbon screen where the destination asks. If a blend is suspected, a sterol and tocopherol pattern describes the feedstock. Request the limit of quantification for each screen: an undetected result without that number describes the method, not the oil.

Comparing two suppliers

Six lines make the comparison: form and CAS number; CLA figure and its basis; isomer sum and split; free fatty acid and peroxide value; metal panel and microbiology; pack and lot code. Two quotations that agree on the CLA figure but differ on the basis or the isomers are not describing the same oil.

Traceability is the second layer: who ran the lot, on which feedstock, through which isomerisation and refining steps, because those steps explain the numbers. The catalog specification is on the CLA oil product page; the powder is a separate product with its own limits, listed on the CLA powder page. The methods behind the panel are indexed under methods, and the release and retained-sample workflow is on the quality page.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation