02.1 Borage vs evening primrose

Borage oil vs evening primrose oil: GLA, dose and the label

Technical document 02.1 · Reviewed 2026-11-19 · Borage Oil

On this page
  1. Two oils, two fatty-acid profiles
  2. The potency difference in grams
  3. Capsules, softgels and powders
  4. Oxidation and the alkaloid file
  5. The label has to name the oil
  6. The market route is similar, the file is not
  7. When to choose which

Borage oil and evening primrose oil are both GLA sources, but they are not interchangeable at the same weight. Borage carries 18–25% GLA and evening primrose 8–11%, so a fixed label figure needs roughly half the oil weight from borage; the rest of the profile, the alkaloid file and the ingredient name also change.

In one line

At 18 to 25% GLA, borage oil reaches a label figure with about half the oil weight that evening primrose oil needs at 8 to 11%, and the swap changes the profile, the alkaloid file and the ingredient name.

Two oils, two fatty-acid profiles

Borage (Borago officinalis) seed oil is the more concentrated GLA source and the less linoleic one. Evening primrose (Oenothera biennis) seed oil is the reverse: a large linoleic fraction and a modest GLA fraction. That is a different composition, not a quality ranking, and it changes the oil weight, the mouthfeel, the oxidation behaviour and the label.

Typical fatty-acid profiles · borage oil against evening primrose oil
MarkerBorage oilEvening primrose oil
GLA (C18:3 n-6)18–25%8–11%
Linoleic (C18:2 n-6)30–40%70–75%
Oleic (C18:1 n-9)15–25%8–12%
Erucic (C22:1)About 1–3%Trace
Nervonic (C24:1)About 1–2%Trace
GLA : linoleicAbout 0.45–0.83About 0.11–0.16

Borage also carries small amounts of erucic and nervonic acid, which evening primrose does not. The minor acids are identity markers and a reminder that the two oils are different materials. The ranges are typical; the certificate carries the measured profile for the lot.

The potency difference in grams

One gram of borage oil at 18–25% GLA carries 180–250 mg GLA; one gram of evening primrose at 8–11% carries 80–110 mg. The midpoints are about 215 mg against 95 mg, a little over twice as concentrated, and the ratio moves with the lot because both ranges are wide.

Read the other way, 100 mg GLA needs 0.40–0.56 g of borage oil or 0.91–1.25 g of evening primrose oil. That is a label calculation, not a dose recommendation, and it explains why a 500 mg borage capsule and a 1,000 mg evening primrose capsule can carry a similar GLA figure.

Capsules, softgels and powders

A 500 mg softgel of borage oil at 20% GLA carries about 100 mg GLA; the same fill of evening primrose at 10% carries about 50 mg. A 1,000 mg softgel doubles those figures. The formulator can reach a target with fewer or smaller borage capsules, which matters when the serving size is fixed.

For a powder, the oil load sits between the oil and the label. At 40% oil load, borage at 20% GLA on the oil carries about 8% on the powder, and evening primrose at 10% carries about 4%; a 100 mg GLA serving takes about 1.25 g of the borage powder or 2.5 g of the evening primrose powder. If a supplier quotes only the oil load, or only the GLA on the powder, half the calculation is missing.

Oxidation and the alkaloid file

Both oils are rich in polyunsaturated fatty acids and both oxidise; the GLA in each carries three double bonds. Borage is not automatically the more stable oil because it is more concentrated, and evening primrose is not automatically the more stable one because it is more dilute. Peroxide value, p-anisidine value, the antioxidant, the headspace and the pack decide the shelf life.

Borage adds a risk that evening primrose does not: pyrrolizidine alkaloids. Borage is a PA-relevant botanical, and the seed oil can carry a load that the destination limits. The file needs a PA result by LC-MS/MS, calculated at the finished-product dose, plus the refining record where the oil is refined. A lot can pass its GLA and oxidation limits and still fail the alkaloid question.

The label has to name the oil

“Borage oil” and “Borago officinalis seed oil” are the names for one ingredient; “evening primrose oil” and “Oenothera biennis oil” are the names for another. A product named for one source cannot be made with the other, even when the GLA figure matches. If the pack contains both oils, the ingredient list has to show both, ordered by weight.

The GLA figure needs a basis: oil weight or GLA figure, one follows from the other, and both should agree with the COA. Reformulating from one to the other means a fresh label, a fresh ingredient declaration and a fresh stability file. The front-of-pack name follows the source, not the GLA figure.

The market route is similar, the file is not

Both oils have a history of food use in the EU before 15 May 1997 and are sold as dietary ingredients in the United States; the buyer's regulatory team should still check the current novel-food catalogue, the dietary-ingredient basis and the destination rules for the specific oil and process. Neither carries an authorised EU or UK health claim for GLA as of this review, and a US structure or function statement needs the DSHEA disclaimer.

The files diverge on the borage-specific items: the PA statement, the erucic and nervonic figures where required, and the refining record. The evening primrose file does not carry the same PA question. The contaminant and label rules apply to both, but the borage evidence is not a copy of the evening primrose evidence.

When to choose which

Borage is the practical choice when the label figure has to be met with less oil, when the borage name is acceptable, and when the customer signs off the different profile and the PA evidence. Evening primrose is the practical choice when the label itself names it, when an existing EPO specification and stability file are already in place, and when the formulation uses its higher linoleic fraction.

Neither oil is a drop-in for the other. A source switch changes the ingredient name, the oil weight per GLA figure, the profile, the alkaloid file and the label, so it runs through change control: new specification, new certificate and, where needed, a new stability review.

The catalog limits are on the borage oil product page. The evening primrose specification is on the evening primrose oil powder page, grade and GLA options are on the borage grades page, alkaloid and label rules are on the compliance page, test methods are indexed under methods, and release is described on the quality page.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation