Borage oil grades: cold-pressed, refined and high-GLA
Borage oil is traded in three practical grades — cold-pressed, refined and a high-GLA refined cut — with organic versions of the first two. The grade decides the colour, the free fatty acid and peroxide values, the pyrrolizidine-alkaloid load and the documentation that comes with the lot, while the GLA range is agreed separately. The choice follows the label, the capsule format and the market file rather than a ranking of quality.
Grade is a process decision before it is a GLA decision: cold-pressed, refined and high-GLA borage oils differ in colour, oxidation values, alkaloid load and paperwork.
Why the grade comes before the GLA figure
Two borage oils can report the same GLA and behave differently in a capsule. A cold-pressed oil carries the seed's minor components, a stronger colour and aroma, and a free fatty acid figure that reflects the pressing rather than a failure. A refined oil has been through alkali refining, bleaching and deodorisation: it is paler, milder and lower in free fatty acid, and the same steps reduce the pyrrolizidine-alkaloid load that borage seed can carry.
That is the trade. Refining buys colour, taste, oxidation headroom and a lower alkaloid figure, and it removes some of the tocopherols and sterols that a cold-pressed buyer may be paying for. Neither route changes the fatty-acid backbone much, which is why the GLA range has to be specified on top of the grade rather than instead of it.
For a supplement label, the grade is also a documentary choice: cold-pressed needs a pressing record and a PA statement; refined needs the refining record, the deodorisation conditions and the process-contaminant statement.
The grades side by side
| Grade | Process | GLA | Character and typical use |
|---|---|---|---|
| Cold-pressed, standard | Seed pressed and filtered; no solvent | 18–23% | Fuller colour and aroma; capsules and clean-label oils |
| Refined, standard | Alkali refining, bleaching, deodorisation | 18–25% | Pale and mild; capsules and oil blends |
| High-GLA refined | Selected seed refined to the upper range | 23–25% | Less oil weight per label figure |
| Organic cold-pressed | Certified organic seed, pressed | 18–22% | Organic-labelled capsules and oils |
| Powder on carrier | Oil microencapsulated on a carrier | 18–25% on the oil | Sticks and powder blends; oil load declared |
The ranges are market ranges, not a second specification. The catalog range that governs an order is 18.0–25.0% GLA by GC; a grade narrows it. The powder line is a format, not a grade: the oil load and the powder's GLA figure must be stated separately, because 20% GLA on a 40% oil powder is 8% on the powder.
Colour, clarity, odour and the cold test
The catalog appearance is a clear to slightly hazy oil, pale yellow to golden. Cold-pressed borage is usually the darker and hazier of the two main grades, and a sediment or a cloud at low temperature is normal for an unrefined oil. Refined oil is lighter and should stay clear at room temperature; a haze that persists after warming is a prompt to ask about moisture, waxes or the refining step.
Borage oil has a faint, mild, slightly grassy odour when fresh. A rancid, painty or cardboard note is an oxidation signal, not a grade characteristic, and it can appear while the GLA figure is still inside the range. The odour check is a screening test; the peroxide and p-anisidine values are the evidence.
Viscosity, density and refractive index sit in the usual triglyceride window. They are useful for a quick check but weak for identity; the fatty-acid profile carries the identity question. The identity page sets out the full test set.
What the GLA figure means in a capsule
One gram of borage oil at 18–25% GLA carries 180–250 mg of GLA. A 500 mg softgel carries 90–125 mg, and a 1,000 mg softgel carries 180–250 mg. Read the other way, a label figure of 100 mg GLA needs 0.40–0.56 g of oil at the catalog range, before any overage or fill loss.
Those figures are arithmetic, not a dose recommendation. The label figure, serving size and capsules per serving are the formulator's decisions; the certificate supplies the concentration. A label that states oil weight and one that states GLA are different claims, and both must agree with the lot's COA.
For a powder on carrier, the same arithmetic runs through the oil load. At 40% oil load and 20% GLA on the oil, one gram of powder carries 80 mg GLA; at 25% GLA on the oil it carries 100 mg. A powder specification that gives only one of the two leaves the conversion unstated. The comparison with evening primrose oil, which is less concentrated, is worked through on the borage versus evening primrose page.
Writing the grade into the specification
A borage specification should open with the species and the plant part: “borage (Borago officinalis) seed oil”. It should then fix the process — cold-pressed, refined or organic — the GLA range and its basis, and the full fatty-acid profile with linoleic, oleic and the minor acids. Moisture, free fatty acid, peroxide value and the PA limit come next, followed by the antioxidant, if one is added, and the pack.
If the customer buys against a monograph, add the monograph lines. The British Pharmacopoeia monograph for refined borage oil caps erucic acid at 3.0% and nervonic acid at 4.5%; a buyer who needs it should write it into the specification rather than assume it. The catalog range on this site does not carry those caps, so a monograph order is a separate specification, not a variant of the catalog one.
The grade name on the certificate, the purchase order and the label review should be the same words. “Cold-pressed” is a process statement; “refined” is a process statement; neither is a synonym for a GLA figure. A lot that meets the GLA range but not the process statement is the wrong grade.
When borage is the wrong grade or the wrong oil
Borage is the wrong oil when the label names evening primrose, blackcurrant or another source. The ingredient name, the species and the INCI name are part of the product, and a GLA match does not license a substitution. It is also wrong when the formula is built around evening primrose's higher linoleic fraction, or when the customer's specification is written around an existing EPO stability file.
Within borage, a cold-pressed grade is the wrong grade when the PA limit or the colour window cannot be met, and a refined grade is the wrong grade when the project needs the minor components of the unrefined oil. A high-GLA cut is wrong when the extra concentration is unused and the specification is fixed at 20%. Grade changes are change-control events, not stock swaps.
The catalog limits sit on the borage oil product page. The alternative source is covered on the evening primrose oil powder page, release tests are listed on the COA page, the test methods are indexed under analytical methods, and the release process is described on the quality page.
In this document
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation