Borage oil: MOQ, packaging and ordering
The minimum order for borage oil is 1 kg, supplied in an amber bottle. Production quantities are packed in the 25 kg HDPE drum, and a released lot that meets the catalog specification usually ships within 1–7 days. A quotation is built from the grade, the GLA range and the tests the destination requires, not from the pack size alone.
The 1 kg amber bottle is the smallest unit we can draw from a released lot and keep traceable to a retained sample; the 25 kg drum is the same oil in a production pack.
Why the minimum is one kilogram
Borage oil is a specialty seed oil, not a commodity sold by the tanker. The 1 kg pack is large enough to run a bench trial, a softgel fill check and an independent GC or oxidation test, and small enough that a buyer can evaluate a lot without committing to a production quantity. It is also the smallest unit we can draw from a released lot and keep traceable to a retained sample.
The minimum is a traceability unit, not a marketing threshold. Every pack carries a lot code that links back to the pressing or refining batch, the certificate and the retained sample. A buyer who needs a different pack size should raise it before the order is placed, because the pack is part of the specification and part of the stability file.
Specialty oils also move in small volumes. A 1 kg order can be shipped by courier, while a 25 kg drum goes as a standard palletised consignment. Neither is a dangerous good under normal transport classification, but the pack has to be closed, labelled and protected from light and heat in transit.
The two standard packs
| Pack | Format | Typical use |
|---|---|---|
| 1 kg | Amber bottle with a closed liner | Sample, bench trial, small batch |
| 25 kg | HDPE drum with a food-grade liner | Production run, blending, softgel fill |
The amber bottle is part of the light protection, not a decoration. A clear bottle in a lit warehouse exposes the oil through the wall, and the label does not stop the oxidation. The HDPE drum is a moisture barrier and a light barrier, and its liner is the primary seal; a damaged liner or a drum that has been opened and left with a large headspace is a different storage condition.
Nitrogen flushing, if required, should be written into the order and stated on the packing record. The same applies to any antioxidant: it is part of the specification, not an extra, and the label declaration follows from it. A drum that is filled to the shoulder has less headspace than a part-used drum, which is why the pack size should match the rate at which the customer uses the oil.
Lead time and what changes it
A catalog grade held in stock normally ships within 1–7 days. The clock starts when the order, the specification version and the shipping details are confirmed, not when the enquiry arrives. A released lot ships with its certificate and its pack record; a lot that has to be re-tested for a destination-specific panel adds time before dispatch.
A new GLA range, a different refining route, a monograph specification or a PA limit below the standard release panel can add time, because the material may have to be selected or tested against the new requirement. The exact date is confirmed with the order; a promise made before the specification is fixed is not a lead time. Seasonal seed availability can also move the date for a grade that is not held in stock.
The six details a quotation needs
- The species and grade: borage seed oil, cold-pressed, refined, organic or a high-GLA cut.
- The GLA range and its basis: percentage by GC, on the oil, with the method and the chromatogram requirement.
- The full profile, free fatty acid, peroxide value and any p-anisidine limit beyond the catalog.
- The pyrrolizidine-alkaloid limit, the method and whether a per-lot statement is required.
- The pack size, the number of packs and the labelling and pallet requirements.
- The destination, the delivery term and the documents the market file needs.
A quotation that lists only “borage oil 20%” is not a quotation for a specified material. The six details turn it into one, and they also make the certificate and the purchase order agree. If a detail is not fixed, it should be marked as open and settled before the order rather than assumed from a previous purchase.
Samples and the pre-order check
A sample is drawn from the released lot and shipped with the same lot code as the production pack. A 100 g draw is enough for a GC fatty-acid profile, free fatty acid, peroxide value and a PA screen; a larger draw is useful if the customer wants to run a softgel fill trial or an accelerated storage check. The sample should be kept closed, cool and dark, and tested soon after arrival, because an oil sample on a bench is already ageing.
The sample is not a separate production run. It is a draw from the lot that will ship, and the certificate for that lot should accompany it. If the sample passes and the production lot is drawn from a different batch, the buyer is relying on a different material; the lot code on the certificate is the link that has to match.
For a first order, it is worth testing the sample for the two things that are easiest to assume: the full fatty-acid profile, not only the GLA, and the peroxide and p-anisidine values. The identity page explains what the profile proves, and the COA page explains how the results should be reported.
Terms to settle before the purchase order
The specification version belongs on the purchase order, together with the grade, the GLA range, the PA limit and the pack. The certificate is supplied per lot; a certificate from a previous lot is not evidence for the lot that ships. The retest date and the remaining shelf life at delivery should be stated, and any deviation from the specification should be agreed in writing before dispatch.
Change control is the term that protects both sides. A change of seed source, pressing temperature, refiner, antioxidant or pack is a specification change, and it should trigger a new certificate and, where the market file depends on it, a new stability review. Delivery terms, documents and the sample retention period belong in the same agreement.
The catalog data is on the borage oil product page. The alternative source is covered on the evening primrose oil powder page, the test methods are indexed under analytical methods, release is described on the quality page, and the pack and storage limits are on the stability page.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation