01 COA & batch testing

What the COA for black currant seed oil actually contains

Technical document 01 · Reviewed 2026-11-20 · Black Currant Seed Oil

On this page
  1. The certificate as a test report
  2. The basis behind the profile
  3. Release limit versus batch result
  4. What moves between batches
  5. When an outside laboratory is warranted
  6. What to compare between suppliers

The certificate for a black currant seed oil lot reports the fatty acid profile by GC, free fatty acid, peroxide value, moisture, heavy metals, microbiology and appearance. The profile identifies the oil; free fatty acid and peroxide value describe its condition. Every line should name its method and its limit, with the laboratory's measured value held in a separate column.

In one line

A black currant seed oil certificate is read as a profile, not a single marker: GLA, ALA and linoleic acid together identify the oil, while free fatty acid and peroxide value describe how well it has been kept.

The certificate as a test report

A lot certificate earns its place when a reviewer can follow each line without asking a question. That means three columns, not one: the parameter, the method behind it, and the limit it was released against. When a row offers only “conforms”, the conclusion is visible but the evidence is not.

The identity row is a fatty acid profile, not a single retention time: GLA, ALA and linoleic acid together are the evidence, because one GLA figure can be matched by a blend.

Fatty acid profile and condition tests · black currant seed oil
ParameterMethodRelease limit
AppearanceVisualClear to slightly hazy oil
IdentificationGC fatty acid profileProfile conforms to the reference
Gamma-linolenic acid (GLA)GC of fatty acid methyl esters15.0–20.0%
Alpha-linolenic acid (ALA)GC of fatty acid methyl esters12.0–15.0%
Linoleic acid (C18:2)GC of fatty acid methyl esters40.0–50.0%
Free fatty acidTitration≤0.50%
Peroxide valueIodometric titration≤5.0 meq O₂/kg
Moisture, metals and microbiology · black currant seed oil
ParameterMethodRelease limit
MoistureKarl Fischer≤0.1%
Heavy metalsICP-MS, closed-vessel digestPb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg
MicrobiologyEnumeration and absence testingAPC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent

The first table carries the profile and the two condition tests; the second carries moisture, metals and microbiology. A certificate with only the first has described the oil, not its fitness for use.

The basis behind the profile

The GC result is a percentage of total fatty acids, reported from the methyl esters. The certificate needs to name that convention. “GLA 17.5%” can mean 17.5% of the total fatty acid methyl esters by peak area, 17.5 g per 100 g of oil, or 17.5% of the oil as weighed, and those are not the same quantity.

A triglyceride is mostly fatty acids with a glycerol backbone, so a profile on total fatty acids reads slightly higher than one on the oil weight. The gap is small, but mixing the two bases will not reconcile with the fill weight.

The profile should be identified against a certified FAME standard mix, with the column, detector and integration parameters named. Area normalisation is usual, but an internal standard gives a more defensible absolute figure. If the certificate says “profile conform” without individual percentages, ask for the chromatogram and the integration report.

Release limit versus batch result

A release limit marks the edge of the specification; a batch result records what the laboratory actually found. Keep them apart. The limit sits in one column and the measured value in another, and the method is named so the number can be reproduced. A “result” column that simply repeats the specification range is a second copy of the gate.

Reading a black currant oil result against its limit
TestSpecification limitWhat the certificate must print
GLA15.0–20.0%A measured percentage of total fatty acids, with the basis
ALA12.0–15.0%A measured percentage of total fatty acids
Linoleic acid40.0–50.0%A measured percentage of total fatty acids
Free fatty acid≤0.50%A measured percentage, with the titration method
Peroxide value≤5.0 meq O₂/kgA measured value in meq O₂/kg

A pass statement is the end of the argument, not the argument itself. For a profile, the three markers have to agree with each other; a lot that meets the GLA figure while ALA is out of range has not met the profile. For peroxide value, the result is a measured number, not a statement that the oil “is fresh”.

What moves between batches

Harvest, cultivar and origin move the GLA and ALA figures. Pressing and finishing move the free fatty acid, the colour and the tocopherol content. Storage and transport move the peroxide value and the p-anisidine value. Those are different causes, and they call for different questions.

A GLA result inside 15.0–20.0% while ALA drifts toward the bottom of its range is still a conforming lot, but it is a different oil for a label that declares both. A peroxide value that climbs from lot to lot points to storage or the journey, not the seed; a free fatty acid result near 0.50% points to pressing and seed moisture.

Colour is the least quantitative line. Cold-pressed black currant seed oil is clear to slightly hazy and can vary from pale yellow to golden; a darker lot is not automatically oxidised. Read appearance with peroxide value, not instead of it. If the shelf life is long, ask for the p-anisidine value as well; it is not in the catalog specification.

When an outside laboratory is warranted

An outside laboratory earns its place when the source is new, when a shipment enters a regulated market for the first time, when the profile is contested, or when a peroxide result disagrees with the smell and taste of the oil. The panel is not a full repeat of the certificate: GC-FAME with the individual fatty acids, free fatty acid, peroxide and p-anisidine values, moisture, ICP-MS metals and the micro count.

Add a sterol and tocopherol profile when the question is authenticity rather than condition; those minor components are harder to match than the main fatty acids. A stable-isotope result can support the source question when the commercial risk justifies it. Ask for each screen's detection limit; a “not detected” line without a limit says more about the method than the sample.

The chain of custody is part of the evidence: the sample tested should be the retained sample, and the report should name the lot. If a result is contested, send the referee the retained sample, the certificate and the specification, and ask for tests that separate the profile from a blend.

What to compare between suppliers

Six lines make a useful side-by-side comparison: species and origin; the GLA, ALA and linoleic figures with the basis; free fatty acid and peroxide value; moisture and contaminants; pack and lot code; process, cold-pressed or refined. Two quotations that agree on GLA but differ on ALA are not the same oil.

Traceability sits behind those numbers: who pressed the seed, which species and cultivar, and whether the oil was filtered or refined. The catalog specification sits on the black currant seed oil product page; the tests that separate the oil from its neighbours are on the identity page; the neighbouring GLA oil is on the evening primrose oil page; the method library is indexed under analytical methods; the quality page sets out how a lot is released.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation