06 Identity & adulteration

How we prove a lot is black currant seed oil

Technical document 06 · Reviewed 2026-11-20 · Black Currant Seed Oil

On this page
  1. The four identity layers
  2. The ratios that separate the oils
  3. X-ray diffraction and the solid state
  4. What adulteration looks like
  5. How to write the identity into the specification
  6. Five questions for the supplier

A black currant seed oil lot is identified by its fatty acid profile, not by a single GLA figure. GLA 15.0–20.0%, ALA 12.0–15.0% and linoleic acid 40.0–50.0% together separate Ribes nigrum seed oil from evening primrose, borage and flaxseed oils. The sterol and tocopherol fingerprint and the source record support the profile.

In one line

The GC profile names the oil, the sterol and tocopherol pattern backs up the source, and the condition tests show how the lot has aged.

The four identity layers

A correct name on a certificate proves only that the paperwork is correct. The four questions below are independent, and each needs its own result. Whoever answers only the first question has given you a label, not a drum.

Four separate questions behind a black currant oil identity
LevelWhat it asksAnalytical evidenceWhat it establishes
DocumentIs the species named?Species, CAS number, processPaperwork only
Fatty acid profileIs the GLA, ALA and linoleic pattern right?GC of fatty acid methyl estersThe oil family and the source
Minor componentsIs it black currant, not a blend?Sterol and tocopherol profileThe botanical source
ConditionIs the oil fresh?Free fatty acid, peroxide and p-anisidine valuesWhat storage has done since pressing

The first layer is necessary and simple. The second is the routine identity test. The third is the one that catches a blend built to pass the second. The fourth does not prove identity at all, but an oxidised lot can look wrong on the profile and a fresh lot can hide a source problem. Read all four together.

The ratios that separate the oils

The catalog ranges give ratios that are useful as a first screen. GLA divided by ALA is about 1.0–1.7 across the ranges; linoleic acid divided by GLA is about 2.0–3.3. Evening primrose oil at GLA 8.0–11.0% and linoleic acid 65.0–75.0% gives a linoleic-to-GLA ratio of about 6–9, and its ALA is not a specified marker. A profile that lands outside the black currant ratios is a different oil or a blend.

The ratios also catch a blend built to hit one number. Adding evening primrose oil to black currant oil raises linoleic acid and lowers ALA; adding flaxseed oil raises ALA and dilutes GLA. The GLA figure can be held while the ratios move. Calculate them from the measured percentages, not from the label.

The ratios are derived from the catalog ranges, not from a batch result. They are a screening aid, not a specification, and a lot near an edge needs the full profile and the minor-component data before the source question is settled.

X-ray diffraction and the solid state

X-ray diffraction is a solid-state method and has no direct role in an oil. It becomes relevant only for the powder-on-carrier format, where it can show the crystalline or amorphous state of the carrier, or when a crystalline contaminant is suspected. It does not identify the fatty acid profile and it does not measure the GLA content.

For an oil, the solid-state question is the wrong question. Ask for GC-FAME, sterols, tocopherols and, if the source is disputed, a stable-isotope result. A certificate that offers XRD as identity evidence for an oil has answered a question the material does not pose.

What adulteration looks like

Adulterants in black currant seed oil and how they show up
MaterialEffect on the profileWarning signConfirmatory test
Evening primrose oilRaises linoleic acid, lowers ALALinoleic-to-GLA ratio high; ALA lowGC profile, sterols
Flaxseed oilRaises ALAALA above range; GLA dilutedGC profile
Sunflower or soybean oilDilutes GLA and ALAGLA low; linoleic acid highGC profile, sterols
Borage oilRaises GLAGLA above range; ALA lowGC profile, sterols
Refined oil sold as cold-pressedLowers colour, free fatty acid and tocopherolsFree fatty acid low; tocopherols low; colour paleFree fatty acid, tocopherols, appearance

The strongest single signal is the combination of a low ALA with a high linoleic-to-GLA ratio, which is the evening primrose pattern. The second is an ALA figure above the range, which points to flaxseed. Neither is proof on its own; the sterol and tocopherol profile is what turns a suspicion into a finding.

How to write the identity into the specification

  • “Black currant (Ribes nigrum) seed oil, cold-pressed, CAS 68606-81-5.”
  • “GLA 15.0–20.0%, ALA 12.0–15.0% and linoleic acid 40.0–50.0% of total fatty acids by GC.”
  • “Identity confirmed by the full GC profile against a certified FAME standard.”
  • “Free fatty acid ≤0.50%; peroxide value ≤5.0 meq O₂/kg; moisture ≤0.1%.”
  • “Heavy metals and microbiology as listed on the certificate.”
  • “Sterol and tocopherol profile on request where the source is disputed.”
  • “Destination and process agreed in writing before the first order.”

Five questions for the supplier

  1. What species and process does this lot come from, and which CAS number appears on its certificate?
  2. Will you send the full GC profile with GLA, ALA and linoleic acid, not just the GLA percentage?
  3. What are the free fatty acid and peroxide values for this lot, and when was it pressed?
  4. Can you provide the sterol and tocopherol profile if the source is questioned?
  5. If we disagree about this lot, will you re-test the retained sample with us?

If the supplier answers all five, the file is nearly complete; a single GLA figure leaves most of the question open. Catalog data sits on the black currant seed oil product page; the COA page explains how the certificate is laid out; the grades page compares the process routes; the level-four comparison sets out the evening primrose difference; the evening primrose profile is on its product page; the methods are indexed under analytical methods; and release is described on the quality page.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation