Black currant seed oil: MOQ, packaging and ordering
The smallest order is a single 1 kg amber bottle; production volumes move in 25 kg HDPE drums. Standard packs are dispatched in 1–7 days. A firm quote depends on six answers: which species and process, which fatty acid profile, which condition tests, how much and in what pack, where it is going and on which Incoterm, and which documents the market needs.
The 1 kg bottle is the smallest saleable unit because a lot can be sampled, tested and followed from it without broaching a 25 kg drum.
Why the minimum is 1 kg
One bottle is enough to run a bench trial, hold back a retained sample and send a portion to an outside laboratory. It also travels as a parcel, so a formulator can start work before the production plan is signed off. The bottle carries a lot code; it is not a scoop out of a drum.
Smaller quantities mean splitting a bulk lot and repacking it, which adds handling, increases headspace and breaks the link to the original pack. A 25 kg drum lowers the handling per kilogram but ties up inventory for longer. The minimum is set by the pack, not by a volume target.
Packs and formats
| Pack | Net weight | Typical use | Notes |
|---|---|---|---|
| Amber bottle | 1 kg | Trial, sample, small batch | Light barrier; reseal after opening |
| HDPE drum | 25 kg | Production | Inner liner; identify the lot on both drum and liner |
| Powder on carrier | On request | Dry blends and sticks | Carrier and oil load change the specification |
The powder on carrier is a different product, not a packing variant. Its oil load, carrier, moisture and particle size have to be specified, and its GLA figure is calculated on the oil or on the powder—state which. Do not order the powder as a substitute for the oil without a new specification and a label check.
Lead time and dispatch
Standard packs are dispatched within 1–7 days of order confirmation. The clock covers picking, documents and handover to the carrier; transit, customs and the customer's own release sit outside it. A non-standard pack or a powder on carrier takes longer and should be quoted as a separate line.
Get the dispatch date in writing rather than relying on the range. A 1 kg bottle normally goes as a parcel; the drum moves on a pallet. The Incoterm allocates freight booking and customs clearance. Send the COA and the other lot documents with the consignment, not after it.
What a quotation needs
A quotation can be compared only when it states these six points:
- Product and process. Black currant (Ribes nigrum) seed oil, cold-pressed, CAS 68606-81-5.
- Profile. GLA, ALA and linoleic acid ranges, with the basis and the GC method.
- Condition tests. Free fatty acid, peroxide value, moisture and the contaminant panel.
- Quantity and pack. A 1 kg amber bottle, a 25 kg HDPE drum, or powder on carrier.
- Destination and Incoterm. The delivery country, the port or address, and the agreed trade term.
- Documents and market. COA, specification, SDS, and any statement the importer needs.
A quotation that omits the process or the destination market is not yet an offer that can be checked. The same oil can suit one destination and fall outside the file for another, so the documentation travels with the offer. Commercial terms belong on the quotation.
A sample without a lot code proves little
Qualification begins with one bottle. Test the fatty acid profile, free fatty acid, peroxide value and moisture before scaling up, and draw a retained sample from that same bottle. The sample, the COA and the quotation should all carry the same lot code. Without that code, it is a sample with no history.
A trial that needs less than a kilogram is a split from a bulk lot, not a catalog bottle. It carries its own handling record and cannot be sold or described as the 1 kg amber pack. Request the split in writing and file its lot code with the trial data.
Terms to settle before the first order
Put the commercial terms and the quality terms in one document: Incoterm, pack, dispatch window, specification revision, a COA per lot, the retained sample, the retest period and the change route. Agree them before the first production order, when the conversation is still easy.
When a lot falls outside the agreed specification, the answer is a joint re-test on the retained sample against the named method, not a photograph of the packaging. The quality agreement should name the referee laboratory both sides accept and say who commissions the work. A return argued from appearance alone is difficult to defend either way.
The black currant seed oil product page carries catalog data; release tests are listed on the COA page; oxidation is covered on the stability page; the alternative oil is on the evening primrose oil page; the glossary defines MOQ; the tests are indexed under analytical methods; and the quality page describes release.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation