04 MOQ & ordering

Algal DHA powder: MOQ, packaging and ordering

Technical document 04 · Reviewed 2026-11-19 · Algal DHA Powder

On this page
  1. Why the minimum is one kilogram
  2. The two standard packs
  3. Lead time and what changes it
  4. What a quotation needs to be comparable
  5. Samples and the trial
  6. What belongs in the order terms

One kilogram is the qualification unit for this powder: it is the smallest quantity that lets a laboratory run the powder in your own matrix, and it is drawn from a released lot with a batch COA. Above that, orders are built from two standard packs, a 1 kg foil pouch and a 25 kg fiber drum, with a 1–7 day lead time from released stock. The minimum is a working quantity, not a commercial threshold.

In one line

A one-kilogram draw from a released lot is the unit that qualifies the material; the pack, the destination and the documents shape the rest of the order.

Why the minimum is one kilogram

A qualification trial needs enough powder for a bench batch, a repeat batch, an accelerated stability point and a retained sample. A few grams answer whether the powder disperses; they do not answer whether a 2 g stick pack still passes its peroxide limit after three months. One kilogram covers those trials at pilot scale and leaves a sample to compare with the next lot.

The lot, not the pack size, is the unit of qualification. A sample drawn from a production lot carries that lot's COA, its peroxide and p-anisidine values and its DHA result; a generic sample from a display jar carries none of them. Ask for the lot code before the trial starts, and keep the trial powder sealed until it is used, so the comparison at the end is between two known materials.

The minimum applies per shipment and per grade. A project that needs the 10% powder and a 20% trial has two lines, and a project that splits a delivery across two destinations has two shipments. Say which is which in the enquiry, because the answer changes the pack and the documents.

The two standard packs

Standard packs for microencapsulated algal DHA powder
PackNet weightTypical use
Foil pouch1 kgBench and pilot trials, sample retention, small batches
Fiber drum with inner liner25 kgProduction runs, capsule and stick filling

The pouch is the barrier pack: foil keeps humidity and oxygen away from a hygroscopic starch wall and can be resealed after sampling. The drum relies on its inner liner for the same protection, and the liner stops being a barrier once it is torn. A drum that is opened for a partial withdrawal and closed again in a humid room has taken up water, so a production plan that draws from a drum over several weeks should say so and plan the session accordingly.

Lead time and what changes it

The standard lead time is 1–7 days for a released lot in a standard pack. The range is wide because it covers the difference between a single pouch picked from stock and a drum that has to be allocated, labelled and prepared for export. The document pack runs in parallel: a COA, a specification and an allergen statement can usually be issued with the lot, while a customer-specific certificate or a legalised document takes longer.

Two requests sit outside the standard line. The 20% grade is a production request rather than a stock item, and agglomerated powder is made to order. Both need a confirmed specification and a production slot before a date means anything, and both should be quoted with the pack that the run will use. Ask for the date against the lot you are buying, not against the product page.

What a quotation needs to be comparable

Two quotations for “algal DHA powder” can describe different materials, so the enquiry has to fix six things before the numbers can be compared:

  1. The product name, source and grade: microencapsulated algal DHA powder 10%, oil from Schizochytrium sp., modified-starch carrier.
  2. The specification and methods: DHA ≥10.0% by GC, EPA and DPA reported, moisture, peroxide and p-anisidine values, mesh, heavy metals and microbiology.
  3. The pack and the quantity: 1 kg pouches, 25 kg drums, or a mix, with the number of each.
  4. The destination and the delivery term, because both decide the documents and the transport pack.
  5. The document set required: COA, specification, SDS, allergen and source statement, origin, and any customer-specific format.
  6. Any special requirement: private-label labelling, a customer specification number, a deviation to be agreed, or a testing protocol the lot must pass.

An enquiry with those six lines gets a quotation that can be compared line by line. An enquiry with only a product name gets a number that cannot.

Samples and the trial

A sample should come from the lot that will be supplied, not from a separate sample stock. Ask for the lot code, the COA for that lot and the pack date, and record the conditions the sample travelled in; a pouch that sat in a hot van for a week is not evidence about the material. Keep part of the sample sealed as a retained reference, so a later dispute can be settled against the powder that was actually trialled.

Run the trial in the matrix you will sell. A dispersion test in water answers dispersibility; it does not answer whether a gummy's heat or a stick pack's film shortens the shelf life. The stability page sets out the tests that belong in that trial, and the retained-sample entry explains why the reference matters.

What belongs in the order terms

Put the specification revision on the purchase order, not only the product name, so a later revision cannot be applied silently. Name the pack, the lot or lots allocated, the document set and the remaining shelf life at delivery. Agree what counts as a deviation and how it is approved in writing, and set the window in which a quality claim can be raised after receipt, with the retained sample as the reference.

Change control is the clause that protects both sides. A new oil supplier, a different carrier, a new dryer or a moved production site changes the material, even when the DHA result stays inside the range. The agreement should say that such a change is notified before shipment, not discovered on the COA. The COA page lists the lines to check on receipt, the MOQ entry and the lead-time entry define the two terms, and the quality page describes how lots and samples are retained. The catalog specification is on the algal DHA powder hub.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation