02.1 Algal vs fish oil

Algal DHA vs fish oil: source, allergens and the label

Technical document 02.1 · Reviewed 2026-11-19 · Algal DHA Powder

On this page
  1. Two supply chains behind one powder format
  2. The spectrum the label has to reflect
  3. The allergen question
  4. What changes on the label
  5. When to choose which
  6. How the source enters the specification

Algal DHA and fish oil are both omega-3 oils, but they are different ingredients on a label: a different source, a different fatty-acid spectrum, a different allergen position and a different document file. The choice is made on the label and the market before it is made on the specification, because the source is what the label has to declare.

In one line

Algal DHA and fish oil can sit in the same capsule format and still be different label ingredients; the source decides the allergen, the ingredient name and the file.

Two supply chains behind one powder format

Algal DHA is produced by fermentation. A strain of Schizochytrium, often reclassified as Aurantiochytrium, is grown in closed tanks on a carbon source and nutrients, the biomass is harvested, and the oil is extracted and refined. The process is land-based and repeatable, and the oil's spectrum is set by the strain and the fermentation conditions rather than by a catch.

Fish oil is rendered from landed fish, typically small pelagics such as anchovy, sardine or mackerel, and refined to remove free fatty acids, colour and odour. The species mix, the season and the fishery change the fatty-acid spectrum from lot to lot, and the refining is what brings the oil to a consistent specification. Both routes end in an oil that can be microencapsulated on a starch wall, so the powder format does not tell you which route was used — the source statement does.

The spectrum the label has to reflect

Algal oil is DHA-dominant with a small EPA fraction and a measurable DPA fraction. Fish oil is a broader mixture in which EPA usually carries a substantial share alongside DHA, and it also carries long-chain monounsaturates and a cholesterol fraction. That difference is why the two products are standardised differently: an algal powder is sold on a DHA figure, while a fish oil powder is commonly sold on an EPA plus DHA total.

Fatty-acid and label markers, algal oil against fish oil
MarkerAlgal DHA oilFish oil
Declared basisDHA, by GCEPA + DHA, by GC
EPASmall fractionSubstantial share
DPAMeasurablePresent, variable
SterolsAlgal patternCholesterol-rich pattern
Ingredient nameAlgal oil (Schizochytrium sp.)Fish oil

A 10% figure therefore means different things on the two labels. On the algal powder it is DHA at 10%; on the fish powder it is EPA plus DHA at 10%, and the DHA share of that total comes from the lot's chromatogram. Anyone comparing the two on the percentage alone is comparing a fatty acid with a sum.

The allergen question

In the EU, fish and fish products sit in Annex II to Regulation 1169/2011, and the entry does not carve out refined fish oil; only fish gelatine used in specific applications is excepted. A fish oil powder therefore carries a fish declaration in the EU, whatever the refining has removed. The UK retains the same list, and Northern Ireland applies the EU rules.

In the US, fish is a major food allergen under FALCPA. The US rules provide an exemption path for highly refined oils derived from a major allergen, and a fish oil can use it only if the documentation supports the claim; the exemption is a file that has to be proven, not a default. Algal oil contains no fish material and does not appear on the major-allergen list, but two other questions remain: the carrier, because a wheat-derived starch would bring wheat into the label, and the fermentation medium, which the supplier should describe.

Allergen position by market, before an exemption is claimed
MarketFish oil powderAlgal DHA powderLabel action
EUFish on Annex IINot on Annex IIDeclare fish and emphasise it; name the alga
USMajor allergen; refined-oil exemption only with a fileNot a major allergen“Contains: fish” where fish oil is used
UKRetained Annex II listNot on the listEU approach applies

Vegetarian and vegan status follows from the source, with one qualification: the powder can be plant-derived while the capsule shell is gelatin. The carrier and the shell belong to the same label decision, and a “fish-free” claim needs a line check, not only an oil certificate.

What changes on the label

In the EU, a food supplement must state the amount of the substance with a nutritional or physiological effect in the product, so the DHA figure belongs on the label beside the ingredient name. The ingredient is named by its source — “algal oil (Schizochytrium sp.)” or “DHA-rich algal oil” — and a fish oil is named as fish oil, with the allergen emphasised in the ingredient list. A nutrition claim for omega-3 fatty acids has its own threshold per 100 g and per 100 kcal, and the authorised DHA and EPA claims carry their own conditions; the claim wording is the brand's responsibility, the numbers are the supplier's.

On a US label the Supplement Facts panel carries the DHA figure in milligrams; DHA has no daily value, so the panel shows the quantity without a percentage. The fish allergen statement is separate from the ingredient list. The UK follows the retained labelling rules with the same structure.

None of these label lines can be fixed by a certificate alone. The source, the carrier and the claim have to be decided together, because each one constrains the others.

When to choose which

Choose algal DHA when the label has to be fish-free, when the declared figure is DHA rather than a total, when the project wants a fermentation-based supply chain with a single strain behind it, or when a vegetarian or vegan positioning is part of the product. Choose fish oil when the label or the registration already names fish oil, when the declared basis is EPA plus DHA, when the EPA share matters to the formula, or when the format is an oil rather than a powder.

A source switch is not a free change. Switch the source and the ingredient name, the allergen statement, the spectrum, the specification and possibly the market route all move; in an existing product it is a change-control event with a new label and new stability data. Decide the source before the label is designed, not after.

How the source enters the specification

Put the source in the product name and repeat it on the certificate: “Microencapsulated algal DHA powder 10%, oil from Schizochytrium sp., modified-starch carrier.” Add the DHA figure by GC, EPA and DPA on the same run, the oil load, the carrier and its source, moisture, peroxide and p-anisidine values, mesh, heavy metals and microbiology. Add the allergen statement and the negative line the label relies on: “No fish ingredient; no fish-derived carrier.”

Then check that the negative line can be defended. The fatty-acid spectrum, the sterol pattern and the source statement are what make it credible; the identity page sets out those tests, the compliance page covers the market files, and the algal DHA powder hub carries the catalog specification.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation