02 Grade comparison

Superoxide dismutase grades: activity, source and carrier

Technical document 02 · Reviewed 2026-11-19 · Superoxide Dismutase

On this page
  1. Why a SOD powder is a blend
  2. The four choices a grade fixes
  3. Appearance, solubility and handling
  4. Mass arithmetic and the label
  5. What to write into the specification
  6. When a different grade is the wrong buy

Superoxide dismutase is sold as a formulated powder, and a grade is fixed by three things: the activity per gram, the source of the enzyme and the carrier it is blended with. The catalog grade here is ≥10,000 U/g, which means that one gram carries 10,000 units and that most of the gram is not enzyme. Changing the source or the activity changes the specification, the documentation and the label arithmetic, so the grade is a purchase decision rather than a packaging detail.

In one line

A SOD grade is defined by the activity per gram, the source and the carrier together, because at 10,000 U/g the carrier is most of what the customer weighs out.

Why a SOD powder is a blend

The purified enzyme is a protein that is expensive to make and hard to handle at full strength: it is sticky, it is hygroscopic, and a gram of it would carry several million units, far more than a capsule or a stick pack needs. The commercial answer is a concentrate blended down to a stated activity with a food-grade carrier, so that a formulator can weigh a practical mass and get a predictable number of units.

That is why the activity per gram is the first line of the grade and why the carrier is the second. The concentrate determines how much activity the blend can carry; the carrier determines the powder's flow, its solubility, its moisture and its label declaration. A grade quoted at 20,000 U/g is not simply twice as good as one at 10,000 U/g; it is a different blend with a different carrier load, and it may need a smaller capsule or a smaller scoop to deliver the same units.

The source is the third axis. An enzyme from a plant extract, a microbial fermentation and an animal tissue is the same catalytic idea and a different material: different protein background, metal content, impurities and documentation. A change of source is a change of specification, not a supplier convenience.

The four choices a grade fixes

What each choice in a SOD grade changes
ChoiceWhat it changesWhat to ask
Activity per gramPowder mass per serving; capsule size; carrier loadThe measured U/g and the assay system behind it
SourceProtein background, metal content, documentationSource name, and the TSE/BSE or allergen statement it needs
CarrierSolubility, flow, moisture, label declarationCarrier identity, blend ratio, allergen and GMO status
Single enzyme or blendWhat the activity number describesWhether any other enzyme is present, and at what activity

The fourth line is the one buyers miss. A powder that contains SOD and catalase can be sold as a blend, but the SOD specification then describes only one component of it. The catalog grade on this page is the single enzyme; a blend is a separate purchase with its own specification and its own label.

Appearance, solubility and handling

The catalog describes a white to off-white, free-flowing powder that dissolves in water to a clear to slightly opalescent solution. The colour is a weak signal: a blend with more carrier is paler, and a concentrate that has been spray-dried rather than lyophilised can differ again. Solubility matters more than colour, because the carrier is often the more soluble part of the blend; a solution that stays cloudy can point to an insoluble carrier or to protein that has been heat-damaged.

Loss on drying is limited to ≤8.0% and particle size to ≥95% through 40 mesh. Both are finishing specifications: the moisture reflects the dryer and the carrier, and the mesh reflects the mill and the sieve. Neither says anything about activity, and a lot can meet both while sitting at the bottom of its activity range.

The powder is hygroscopic once the pack is open. A foil pouch opened for a trial and closed with a clip picks up water in a humid room, and the activity per gram falls as that water dilutes the powder. Weigh out what the trial needs, reseal with the desiccant and keep the working stock dry.

Mass arithmetic and the label

At 10,000 U/g, the arithmetic is direct: 100 mg carries 1,000 units, 250 mg carries 2,500 and 500 mg carries 5,000. The same arithmetic runs backwards from the serving: a formula that needs 3,000 units per capsule takes 300 mg of this grade, which sets the capsule size and the number of capsules per serving.

The carrier load is the part that reaches the label. At 10,000 U/g the powder is very largely carrier, so the carrier has to be declared as an ingredient in the EU list and as an other ingredient in the US Supplement Facts panel, and a change of carrier is a label change. A grade at 20,000 U/g halves the mass per serving and halves the carrier load; that is the reason a higher grade is chosen, not the number itself.

Declare the unit as well as the mass, and declare the basis of the activity. “SOD 250 mg (10,000 U/g)” and “SOD 2,500 U” describe the same capsule from two directions, and a label that mixes them without the denominator invites a mismatch at the weigh-up. The unit page sets out what the unit means.

What to write into the specification

  • “Superoxide dismutase, CAS 9054-89-1, activity ≥10,000 U/g by the xanthine-oxidase/NBT system, with the unit definition stated.”
  • “Source named on the specification and the certificate; the matching documentation attached.”
  • “Carrier named, with its allergen and GMO status; blend ratio declared on the technical data sheet.”
  • “Loss on drying ≤8.0%; particle size ≥95% through 40 mesh; appearance white to off-white.”
  • “Heavy metals and microbiology as listed; no other enzyme declared unless specified.”
  • “Destination market and the source confirmed before the order.”

When a different grade is the wrong buy

A higher-activity grade is the wrong buy when the formula is built around 10,000 U/g and the capsule is large enough: it changes the carrier, the flow and the label for no gain. A lower-activity grade is the wrong buy when the serving needs more units than the capsule holds, because the answer to a fill problem is less of a stronger powder, not a bigger capsule.

A blend is the wrong buy when the customer's specification names one enzyme. If a quotation offers SOD with catalase at a combined activity, ask for the SOD figure separately, because the two enzymes work in sequence and the combined number does not describe either one. A technical grade without the food documentation is the wrong buy for a supplement, however high its activity.

The catalog grade sits on the product page. The certificate rows that carry the grade are on the COA page; the source and blend questions are taken further on the identity page; the pack sizes are on the ordering page; the second enzyme in a blend has its own page under catalase.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation