What the COA for pepsin actually contains
A pepsin certificate reports appearance, the activity ratio or units, identification, loss on drying, the heavy-metal panel, microbiology and particle size. The activity line carries the most weight: 1:10,000 is a ratio, the haemoglobin assay produces a unit, and the two are comparable only when the method, substrate, pH and temperature travel with the number. The limits below are the catalog specification; the batch COA confirms one pack.
The 1:10,000 ratio and the haemoglobin assay are two different statements, and a certificate that shows only one of them cannot be compared with another supplier's.
The certificate as a test report
A certificate is useful when it can be audited line by line. Each row needs what was measured, the method, and the limit the lot was released against; a row that says only “conforms” asks the reader to trust a conclusion without the evidence. Pepsin is recovered from gastric mucosa, so the certificate should also name the species and tissue of origin.
The activity row comes first. It should show the result, the method and the unit, and state whether the figure describes release or the end of the declared shelf life. Identification by infrared spectroscopy supports the activity measurement but does not replace it.
| Parameter | Method | Release limit |
|---|---|---|
| Appearance | Visual inspection | White to off-white, free-flowing powder |
| Activity (ratio) | Haemoglobin activity assay, method named on the certificate | 1:10,000 |
| Identification | Activity assay and infrared spectrum | Conforms to the reference |
| Loss on drying | Gravimetric | ≤8.0% |
| Heavy metals | ICP-MS | Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg |
| Microbiology | Plate count and absence tests | APC ≤1,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent |
| Particle size | Sieve analysis | ≥95% through 40 mesh |
The ratio, the unit and the assay conditions
The 1:10,000 designation is a digestive-power ratio: one gram of the preparation digests 10,000 grams of coagulated egg albumin under the conditions of the method. That is a statement about a substrate and a procedure, not a count of catalytic events. A 1:3,000 grade and a 1:10,000 grade can be ranked on the same scale, while neither number converts into a kinetic unit.
The haemoglobin assay measures something else. A diluted sample is incubated with haemoglobin at acid pH; the reaction is stopped, the undigested protein is precipitated, and the soluble products are read at 280 nm against a tyrosine standard. The result becomes a unit only after the calculation is defined. The FCC unit is the amount that releases one micromole of tyrosine equivalent per minute from a 2% haemoglobin substrate at pH 1.6 and 25 °C; the Anson unit raises the absorbance by 0.001 per minute at pH 2.0 and 37 °C. The same powder can carry different numbers under the two definitions, which is why the method, substrate, pH, temperature and calculation belong on the certificate rather than in a footnote.
The moisture basis is the quiet variable: the catalog allows loss on drying up to 8.0%, so two lots at the same ratio can differ in the water they carry. Compare results on the same basis, with the measured loss on drying beside the activity.
Release limit versus batch result
The release limit is the acceptance boundary; the batch result is what the laboratory measured. Both belong on the page, in separate columns, with the method named. A result column filled with the specification wording is not a result. For a one-sided limit such as 1:10,000, a lot at 10,400 and a lot at 18,000 both pass, and they behave differently in a blend that will lose part of the activity.
| Parameter | Release limit | Result column |
|---|---|---|
| Activity | 1:10,000 by the named method | A measured ratio or unit, with conditions |
| Identification | Activity assay and IR conform | The spectrum and the assay report |
| Loss on drying | ≤8.0% | A measured percentage |
| Heavy metals | Per element | A figure in mg/kg for each element |
| Microbiology | Counts and absence | The count and the absence statement for the lot |
“Passes specification” is a conclusion. Ask for the assay's relative standard deviation where the method allows it; a result close to the floor with poor repeatability is not a comfortable margin.
What moves between batches
Pepsin starts as animal tissue, so the raw material carries more biological variation than a fermentation broth from a fixed strain. The condition of the stomachs, the extraction and precipitation steps and the drying regime all move the activity that arrives at standardisation. The final ratio is set by blending or by dilution on a carrier, which is why the carrier belongs on the certificate.
Water and heat are the post-production variables. A powder dried to a higher moisture reads lower per gram, and frictional heat at the mill can destroy activity before the sieve is reached. Colour is a weak signal: an off-white shift can follow a longer dry while the assay still passes.
Method drift is the quiet one. A new haemoglobin lot, a different incubation bath or a recalibrated spectrophotometer makes two results incomparable even when both certificates use the same words. The lot code on the certificate should match the pouch, the drum and the retained sample.
When to order an outside test
An independent test earns its place for a new source, a first shipment into a regulated market, a disputed result, or a label statement that rests on the activity figure. The panel can stay narrow: activity by a named haemoglobin method on a retained sample, protein or specific activity, a protein pattern by gel electrophoresis, an infrared spectrum, loss on drying, ICP-MS metals and microbiology.
The laboratory must use the same substrate, pH, temperature and calculation as the specification, or the exercise compares methods rather than powders. A result in FCC units is not a second opinion on an Anson result, and neither is a second opinion on the 1:10,000 ratio. Ask for the detection limit behind each screen and the accreditation scope behind each test.
Chain of custody matters: the sample tested should be the sample retained, and the report should identify the lot. The methods index lists the techniques; the quality page describes the release sequence behind the document.
Five lines for a side-by-side review
Put five lines side by side: species and tissue of origin; the activity figure with its method and conditions; protein or specific activity; loss on drying and mesh; and the heavy-metal, microbiology and carrier statements. Two quotations that agree on “1:10,000” but differ on method or moisture basis are not describing the same powder.
Traceability comes next. The certificate should say who manufactured the lot and which standardisation step set the ratio. The catalog specification sits on the pepsin product page. The checks that separate a genuine lot from a diluted one are on the identity page; the ratio and form choices are on the grades page.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation