02 Grade comparison

20,000 FU/g or a dilution: choosing a nattokinase grade

Technical document 02 · Reviewed 2026-11-19 · Nattokinase

On this page
  1. Why an enzyme has grades but no purity
  2. The three options side by side
  3. Powder, mesh and dust
  4. The arithmetic that decides the grade
  5. How to write the grade into a specification
  6. When a dilution is the wrong choice

A nattokinase grade is fixed by three things: the activity one gram carries, the material that activity sits on, and the physical form of the powder. The catalog standard is a 40 mesh powder at ≥20,000 FU/g; a lower-activity dilution and a granulated form are available on request. The choice is usually made by dose weight and dosage form before it is made by anything else.

In one line

The grade is the activity per gram plus what carries it, and switching grades changes the powder mass, the carrier load and the label before it changes anything else.

Why an enzyme has grades but no purity

A mineral salt can be sold at 98% or 99% because the assay measures the molecule against everything else in the drum. An enzyme preparation cannot be described that way. The powder contains the enzyme, the remains of the fermentation, and the carrier used to standardise the activity, so the useful description is a declared activity plus the identity of the carrier and the form of the particles.

That is why two suppliers can both offer “nattokinase” and mean different materials. One sells a concentrate at ≥20,000 FU/g; the other a diluted powder at a fraction of that figure, carrying several times the mass for the same number of units. Neither is wrong. They are different grades with different jobs, and each certificate has to be read in the same way — the COA page sets out the line-by-line reading.

What a grade actually fixes in a formula
PropertyWhat it controlsWhere it shows up
Activity (FU/g)How many units a gram deliversDose weight, label claim, overage
CarrierWhat the activity is diluted onIngredient list, moisture, flow
Particle sizeHow the powder flows and dissolvesBlend uniformity, dust, mixing time
Physical formPowder or granuleDust control, dissolution rate
Source strainWhich organism produced the enzymeIdentity file, regulatory dossier

The three options side by side

The catalog covers a 40 mesh powder at ≥20,000 FU/g, a lower-activity dilution on request, and a granulated form on request. The practical difference between them is dose weight, dust and the amount of carrier that enters the formula.

Grade options and what changes when you switch
OptionActivityPhysical formWhat changes in the formula
Standard powder≥20,000 FU/g40 mesh powderSmallest dose weight; concentrate for blends
Lower-activity dilutionAgreed in the specification40 mesh powderLarger dose weight; carrier becomes an ingredient
GranulatedAgreed in the specificationGranulesLess dust; slower dissolution; check the granulation loss

The activity figure is only comparable when the unit is. An FU/g from one supplier and an IU/g from another are not the same measurement, and the page on FU and IU explains why the numbers cannot be converted.

Powder, mesh and dust

The catalog particle size is ≥95% through 40 mesh, which is a free-flowing powder that blends well into a dry mix and dissolves to a clear to slightly hazy solution. Fines are what make it dissolve quickly and what make it dust. Enzyme powders are respiratory sensitisers, so dust is a handling and documentation question: the SDS carries the hazard statements, and the controls are local exhaust ventilation, closed transfer and the right mask.

Granulation trades dissolution speed for dust control. A granule wets more slowly, so a drink mix that has to disperse in seconds is usually built on powder, while a plant that handles kilos of enzyme a day may prefer granules to keep the air clean. Whichever form is chosen, the granulation step itself removes activity, and the after-step figure belongs in the specification.

The arithmetic that decides the grade

Units are weight multiplied by activity. A 2,000 FU serving needs 0.1 g of a 20,000 FU/g powder and 0.2 g of a 10,000 FU/g dilution. The units match; the mass, carrier and label entry do not. Moving from the concentrate to a two-fold dilution doubles the powder weight and puts one part of carrier into the blend for every one part of enzyme powder.

Weighability is the argument that usually settles it. A 0.1 g charge is routine in a production batch and awkward in a 5 kg pilot, where the balance and the mixing both struggle with a small quantity. A dilution makes the same number of units weighable, while carrying the carrier through the whole formula and into the ingredient declaration.

Two cautions sit beside the arithmetic. First, the label claim has to name the basis: activity at release or activity at the end of shelf life. Second, the dilution is a manufacturing step, so the certificate for a diluted grade should show the activity of that diluted lot, not the activity of the concentrate it came from. A diluted lot that is described only by its parent concentrate has no release figure of its own.

The dosage form narrows the choice. A hard capsule holds roughly 0.3–0.5 g, so a 2,000 FU serving fits at either activity, while a 10,000 FU serving at 10,000 FU/g starts to crowd it. A stick pack has more room; a tablet is limited by compression and granule flow. Fix the form before the grade.

How to write the grade into a specification

A specification that cannot be tested is not a specification. Six lines make this one testable: the activity with its unit and the assay reference; the carrier identity; loss on drying at ≤8.0%; particle size at ≥95% through 40 mesh; the production organism and strain; and the form, powder or granule. Add the labelled basis — release or end of shelf life — and the storage statement.

Write the limit as a one-sided figure (“not less than”) and keep the unit definition beside it, because a change of substrate or assay conditions between lots makes two results incomparable even when both say FU/g. State the carrier even when the grade is undiluted; “none added” is a declaration, and an undeclared carrier is the most common reason two quotations for the same activity do not behave the same way.

The catalog values are on the nattokinase product page; the checks that keep a diluted lot honest are on the identity page; the process loss that follows a granulated grade is on the stability page.

When a dilution is the wrong choice

Three situations argue against diluting. A blend close to its carrier limit gains nothing from more maltodextrin or dextrin. A formula with a tight moisture budget gains nothing from a carrier that holds water. A compact ingredient list gains nothing from an entry that exists only to make the powder weighable.

There is also a process reason: every extra carrier is another material that has to be dispersion-tested, declared and held in inventory, and a dilution that solves a weighing problem at pilot scale can be the wrong grade once the batch is large enough to weigh the concentrate accurately. The grade should follow the largest batch the formula will run, not the smallest.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation