Maltase vs amylase: two starch enzymes, two units
Maltase and amylase both act on α-1,4 bonds in starch-derived carbohydrates, but they are different enzymes with different actions and different units. Amylase is an endo-enzyme that thins starch to dextrins and maltose; maltase is an exo-enzyme that removes glucose from the non-reducing end, including from maltose. A U/g maltase figure and an SKB/g amylase figure cannot be converted.
Amylase cuts starch from the inside and maltase trims glucose from the end, so their units measure different reactions and never convert.
Endo and exo are different jobs
Alpha-amylase, EC 3.2.1.1, attacks α-1,4 bonds at random positions inside the starch chain. The substrate gets shorter quickly, the viscosity falls, and the products are dextrins, maltose and limit dextrins. Maltase, EC 3.2.1.20, works from the non-reducing end and removes one glucose unit at a time. Maltose gives two glucose molecules; longer maltooligosaccharides give glucose plus a shorter chain.
Both reactions increase the number of reducing ends, which is why a generic “reducing sugar” measurement cannot tell them apart. The product profile can. An amylase-treated starch is still a mixture of dextrins; a maltase-treated maltose solution is mostly glucose.
| Property | Maltase | Amylase |
|---|---|---|
| Enzyme class | α-Glucosidase, EC 3.2.1.20 | α-Amylase, EC 3.2.1.1 |
| Action | Exo; terminal non-reducing α-1,4 bonds | Endo; internal α-1,4 bonds |
| Preferred substrate | Maltose and maltooligosaccharides | Starch and dextrins |
| Main product | Glucose | Dextrins and maltose |
| Catalog unit | U/g on a maltose substrate | SKB/g on soluble starch |
| Catalog form | 80 mesh powder | 40 mesh powder |
The units measure different events
An SKB/g result is a dextrinisation rate. A diluted amylase sample acts on soluble starch under the method's 30 °C and pH 4.8 conditions, and the time to an iodine colour endpoint is converted through the method's factor. The number describes how fast the starch chain is thinned, not how much glucose is produced.
A maltase U/g result is a glucose-release rate. One unit releases one micromole of glucose from maltose per minute under the conditions in the method, and the glucose is measured directly or through a coupled colorimetric assay. The number describes hydrolysis of maltose, not thinning of starch.
No conversion factor connects the two. A factor would need the ratio between the assays to stay constant across preparations, and it does not: the substrates, the endpoints and the calculation constants are different. A supplier's “equivalent” figure is a typical value for one product, not a property of either enzyme. What does convert is the total unit count inside one scale: 1 kg at 100,000 U/g holds 100 million U, and 5 kg at 20,000 U/g holds the same. That total is exact and helps with ordering; it carries no information about the other unit.
What each enzyme sees in a blend
Amylase needs starch. Maltase needs maltose or a maltooligosaccharide. In a dry blend neither enzyme acts, because there is not enough free water for the reaction to run. Add water and the substrate decides which enzyme does useful work.
In a starch process the order is usually amylase first: it thins the starch and produces maltose and dextrins, which then become substrate for an exo-enzyme. The hold time, the pH and the temperature decide how far that second step goes. Maltase added before the starch has been thinned has little to work on; maltase held too long after the target sugar profile is reached keeps making glucose.
The carrier matters too. A maltodextrin with a higher dextrose equivalent contains more glucose and maltose, so a blend built on it presents more substrate to maltase if water appears. That can change the sugar profile of the finished product and the numbers on the label.
Using them together
The two enzymes can sit in one blend, but they have to be dosed on their own units and their own method references. “100,000 units of starch enzyme” is not a specification, because the two assays would return different numbers for the same powder and neither would be checkable at goods-in.
A starch-to-glucose process may use several enzymes, and maltase is one exo step rather than a replacement for the whole line. The amylase prepares the substrate; the maltase trims it; a different exo-enzyme may be needed for the rest. Each has its own working pH and temperature window, so the process is designed around the step each enzyme performs, not around a single compromise condition.
In a dry blend for a stick pack or a drink mix, the enzymes are stable together as long as the powder stays dry. Once the consumer adds water, both begin to act if their substrates are present, and the sugar profile moves during the drink's shelf life. If that is not intended, the formulator has to choose one enzyme, inactivate the other, or accept and label the change.
Writing both into a specification
Keep two separate lines. For maltase: “≥100,000 U/g by the maltose-substrate assay, with the pH, temperature and glucose detection stated in the method appendix.” For amylase: “≥100,000 SKB/g by iodine dextrinisation on soluble starch, with the starch, temperature, pH and endpoint stated.” Each line also needs its basis — as-is or dry, release or end of shelf life.
The rest of the specification also differs. Maltase is an 80 mesh powder with loss on drying ≤8.0%; the amylase here is a 40 mesh powder with its own moisture limit. The organism, carrier and protein figure belong on both sheets, but the values are not shared. A specification that names one enzyme and quotes the other's mesh, unit or organism is a mixed document, and the mistake is easy to make when the two products sit side by side.
State the activity as a minimum and keep each method appendix under document control. If either the maltose source or the starch source changes, the two results carrying the same unit label are no longer comparable.
Which one the application needs
If the goal is to thin starch, reduce viscosity or prepare a dextrin, choose amylase. If the goal is to convert maltose or maltooligosaccharides to glucose, choose maltase. If the process needs both, buy both, dose each on its own units, and keep the two specification lines separate.
Do not substitute one for the other on a label or a purchase order. The names, the EC numbers, the units and the analytical methods all differ, and a customer who ordered maltase will not accept an amylase certificate with a converted figure. The maltase product page and the amylase product page carry the two catalog specifications; the maltase grades page covers form and carrier; the methods section covers the analytical families; and the quality page describes the release sequence.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation