Enzymes · Specialty

Maltase

— · CAS 9001-42-7 · Maltase, powder

Maltase specified at ≥100,000 U/g by the maltose-substrate assay; the unit definition, the assay pH and the substrate are part of the specification.

Activity (units)
≥100,000 U/g
Minimum order
1 kg
Indicative lead time
1–7 days
Standard packing
1 kg foil pouch25 kg fiber drum

Specification

What the certificate will report

Activity (units)≥100,000 U/g
AppearanceOff-white to light tan powder
IdentificationActivity assay conform
Loss on drying≤8.0%
Heavy metalsPb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg
MicrobiologyAPC ≤1,000 cfu/g · yeast and mould ≤100 cfu/g · E. coli and Salmonella absent
Particle size≥95% through 80 mesh
Chemical formula—
CAS9001-42-7
Marker setMaltase ≥100,000 U/g
AppearanceOff-white to light tan, free-flowing powder
SolubilitySoluble in water; the solution is clear to slightly turbid.

Primary method Maltase assay (maltose substrate) — the method behind each figure matters as much as the figure. How the COA is built →

What to confirm before ordering

  • Name the unit: maltase activity is defined by the maltose substrate and the assay pH; a number without them is not comparable.
  • Ask for the assay pH, the substrate and the unit definition; the three are part of the specification.
  • The enzyme loses activity with heat and moisture; the pack and the storage condition belong in the specification.
  • Do not use the page as a label or a claim: the finished product's status is a separate legal question.

Buyer questions

Practical answers

What is Maltase specified to?

Activity (units): ≥100,000 U/g. The full specification adds Appearance, Identification, Loss on drying, Heavy metals, Microbiology and the contaminant panel. Every figure on the batch COA is reported with the method used to produce it.

Which form of Maltase is this?

The catalog grade is Maltase, powder. Other salts, hydrates, carriers and particle sizes are separate specifications; the grade page compares the alternatives and explains what changes in the label, the assay and the fill weight.

Which dosage forms does this grade fit?

Food processing, Powder blends. The grade is selected against the dosage form and the target dose: capsule fill and tablet flow depend on bulk density and particle size, while a stick pack or gummy depends on dissolution and taste.

Which documents are supplied with the batch?

A batch-specific COA, TDS, SDS, allergen and GMO statements, an origin record and a residual-solvent statement. Third-party heavy-metal or microbiological reports can be arranged, and the specification comparison is issued before the first order.

What is the minimum order and lead time?

1 kg minimum, packed in a 1 kg foil pouch from a released lot; 25 kg fiber drums are available as quantities scale. 1–7 days after specification and order confirmation. Samples are typically 100–500 g and carry the COA of the lot they were drawn from.

Documentation

Released with every lot

  • Batch-specific certificate of analysis against the agreed specification
  • Technical data sheet with form, CAS or species, carrier, storage and packing
  • Safety data sheet in the 16-section format
  • Allergen, GMO and origin statements signed for the batch
  • Residual-solvent statement for the crystallisation system
  • Specification comparison against the specification you sent

What this page does not claim

Maltase is sold as an ingredient powder. No therapeutic or disease claim is made here, and no finished dosage form is offered. In the EU, claims for the nutrient or ingredient are restricted to the authorised list; in the US, structure/function statements are the responsibility of the brand that makes them and require substantiation. We publish specification, method, form and documents — that is the boundary of what we write.

Next step

Send the spec. We will confirm the form.

A competitor COA, a label claim or a target dose is enough to start. We reply with the grade we can release, the documents behind it and the questions we still need answered.