02.1 Salt and label

Lysozyme vs lysozyme hydrochloride: the salt, the activity and the label

Technical document 02.1 · Reviewed 2026-11-19 · Lysozyme

On this page
  1. One enzyme, two salt designations
  2. The activity figure and the salt
  3. What the label has to say
  4. The market route follows the form and the use
  5. What to write into the specification
  6. When to choose which

Lysozyme is the enzyme; lysozyme hydrochloride is the same enzyme in its hydrochloride salt form, and the hydrochloride is the usual commercial form for food use. The two share the catalytic activity but differ in the counter-ion, the mass per unit of activity, the solution pH and the name that belongs on the label. The switch is a specification and labelling decision, not a unit conversion applied at the balance.

In one line

Lysozyme and lysozyme hydrochloride share the enzyme but not the salt, the mass or the label, and the activity figure has to be read with all three in view.

One enzyme, two salt designations

Hen egg white lysozyme, the common food-grade form, is a small basic protein of about 14.3 kDa. In the hydrochloride form, chloride is the counter-ion to the positively charged protein; in a preparation sold simply as lysozyme, chloride is not the declared counter-ion. The enzyme fold is the same, and the turbidimetric assay measures the same reaction, but the powder around the enzyme is not the same material.

Lysozyme and lysozyme hydrochloride side by side
PropertyLysozymeLysozyme hydrochloride
NameLysozyme, muramidaseLysozyme hydrochloride
CAS number9001-63-29066-59-5 in several registries
SourceDeclared on the certificateDeclared on the certificate
Counter-ionChloride not the declared counter-ionChloride
Solution pH, 2%Depends on the preparation3.0–3.6 in the EU additive specification
Solubility in waterSolubleReadily soluble
Content gateSpecification-specificNot less than 950 mg/g anhydrous for E 1105
Label nameLysozymeLysozyme hydrochloride

The CAS numbers are a common source of confusion. 9001-63-2 identifies the enzyme, and it is the CAS number on the catalog page; the hydrochloride is listed separately in several registries. A purchase order that gives one CAS number and a different salt name has not specified a single material, and the certificate should carry both the enzyme name and the salt name.

The activity figure and the salt

Both forms are assayed by the same turbidimetric principle: a dilution of the powder is mixed with a Micrococcus lysodeikticus suspension, and the fall in absorbance at 450 nm is followed. One unit is defined as the amount that produces a decrease of 0.001 absorbance units per minute at pH 6.24 and 25 °C. The unit definition is the same across the two forms, but the number it produces is a property of the powder, not of the protein alone.

U/mg can mean per milligram of powder as sold or per milligram of protein. The salt form changes the mass of the powder: the hydrochloride carries chloride, so a specification written on the hydrochloride is not numerically transferable to a free-base powder at the same protein content. A 20,000 U/mg figure on one form and a 20,000 U/mg figure on the other do not describe the same protein mass per gram. Divide by protein to get specific activity, and state the protein method beside it.

The EU additive specification for E 1105 sets the lysozyme content at not less than 950 mg/g on the anhydrous basis, and JECFA's monograph uses the same 950 mg/g figure, expressed as lysozyme hydrochloride. That is a content gate, not an activity gate. A certificate that reports only U/mg has not shown the protein content, and a certificate that reports only mg/g has not shown what the powder does. The two figures belong together.

What the label has to say

In the European Union, the additive is listed as E 1105 lysozyme, authorised in ripened cheese at quantum satis under Regulation (EC) No 1333/2008. The additive specification's pH range for a 2% solution is consistent with the hydrochloride form, so the entry and the commercial salt are not in conflict. The entry is for cheese, not for a capsule: a food-supplement use needs its own route, which the buyer's regulatory team confirms.

A supplement label should name the form that is in the powder. “Lysozyme hydrochloride” is more precise than “lysozyme” where the hydrochloride is the ingredient, and the ingredient list, the specification and the certificate should use the same name. Egg is a listed allergen in the EU and a major food allergen in the United States; where the ingredient is present, the label has to declare egg, subject to the specific rules and any derogation for the product.

No disease-related claim is made for either form, and the activity figure is not a clinical result. The claim review sits with the brand's regulatory reviewer and is separate from the certificate. The label also has to state the activity in the form the destination requires, with the unit definition available in the specification.

The market route follows the form and the use

In the EU, three routes can apply to the same enzyme: the additive entry for ripened cheese, the food-enzyme framework of Regulation (EC) No 1332/2008, and the oenological practice for wine, where the OIV code sets a cumulative maximum of 500 mg/L. None of those routes authorises a supplement on its own. In the United States, egg white lysozyme appears in the FDA's food-substance inventory, and GRAS Notice 64 covers specific antimicrobial uses on casings and cooked meat and poultry; those uses do not establish every other use, and a dietary-ingredient route is confirmed separately.

Great Britain checks its own register and labelling rules, while Northern Ireland follows the EU framework. The destination decides which applies, and the buyer's regulatory team confirms the route before the label is written. The compliance page lists the documents that belong in that file.

What to write into the specification

  • “Lysozyme hydrochloride, enzyme name muramidase, CAS 9001-63-2 for the enzyme, source declared on the certificate.”
  • “Activity ≥20,000 U/mg by the turbidimetric Micrococcus assay, with the unit definition and conditions stated.”
  • “Protein and specific activity reported; chloride by ion chromatography where the hydrochloride is claimed.”
  • “If the EU E 1105 specification is the target, add the not-less-than-950 mg/g anhydrous content gate.”
  • “Loss on drying ≤5.0%; particle size ≥95% through 40 mesh.”
  • “Label name and egg allergen statement agreed with the destination before the order.”

When to choose which

Choose the hydrochloride for the commercial food and supplement route: it is the form with the established specification, the acidic solution pH that the EU additive monograph describes, and the solubility that suits a powder blend or a stick pack. This is the form we supply.

Choose a preparation labelled simply as lysozyme only when the destination or the customer specification calls for it and the market file covers it. It is not a drop-in for the hydrochloride: the chloride figure changes, the mass per unit changes and the label name changes. A switch in either direction needs a written change control, a new specification and a label check, not only a new certificate.

The product hub carries the catalog specification; the grades page places this comparison in the wider range; the COA page shows how the salt form is reported; the identity page gives the tests that separate the two; the methods library covers the assay vocabulary; and the quality page describes the release workflow.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation