05 Compliance

The regulatory file for lysozyme hydrochloride

Technical document 05 · Reviewed 2026-11-19 · Lysozyme

On this page
  1. What the file contains
  2. European Union
  3. United States
  4. Contaminants and limits
  5. Claims and the label
  6. Documents for the file
  7. Checklist before the first order

Lysozyme hydrochloride is a food enzyme and, in the European Union, the food additive E 1105. The same powder can be a processing aid, an additive or a dietary ingredient depending on the use and the market, and those are three different regulatory questions. This page sets out the file a buyer should assemble; the buyer's regulatory team confirms the route for the destination.

In one line

The specification describes the powder; the regulatory file shows which lysozyme form, which use and which label the destination allows.

What the file contains

A complete file answers four practical questions. What is the material, and which specification version is being bought? Which lot is being released, and what does its certificate report? Which route and label rules apply to the finished product in the destination market? And what changes if the source, the salt form or the pack changes? The certificate of analysis answers the lot question, the technical data sheet answers the specification question, and the safety data sheet answers the handling question. None of them answers the route question on its own.

The file should also contain the allergen statement, the origin record, the GMO statement, the residual-solvent statement and any customer-specific declaration. For lysozyme the allergen statement is not a formality: the common food-grade material is obtained from hen egg white, and where that is the source, egg is a listed allergen in several markets. Where a statement is not available for the lot, the gap should be named before the order, not discovered at the port.

European Union

Regulation (EC) No 1333/2008 authorises lysozyme as E 1105 in ripened cheese at quantum satis. That entry is specific to the food category and to the additive function; it does not authorise a capsule or a powder blend sold as a food supplement. Lysozyme is also a food enzyme under Regulation (EC) No 1332/2008, and the current Union list and conditions decide the enzyme use. For wine, the OIV code sets a cumulative maximum of 500 mg/L when lysozyme is applied to must and wine; the EU oenological rules and the destination's implementation have to be checked in the current text.

Egg is an allergen listed in Annex II of Regulation (EU) No 1169/2011. Where lysozyme from egg white is present in a food, the ingredient list has to indicate egg, subject to the specific rules and any derogation that applies to the product. A supplement label does not inherit the cheese entry, and the buyer's regulatory team confirms the route and the labelling for the finished product.

United States

Egg white lysozyme appears in the FDA's inventory of food substances with uses as an antimicrobial agent and an enzyme, and GRAS Notice 64 covers its use on casings for frankfurters and on cooked meat and poultry products. Those uses do not establish every other use. A lysozyme powder sold as a dietary ingredient needs a basis that covers the ingredient and the intended use, and the buyer's regulatory team confirms whether a notification or another route applies.

Egg is a major food allergen in the United States, so a product that contains egg-white lysozyme has to declare egg in the ingredient statement where the allergen labelling rules apply. The claim review is separate: the certificate does not approve a claim, and an enzyme activity is not a clinical effect. Great Britain checks its own register and labelling rules, while Northern Ireland follows the EU framework; the destination decides which applies.

Contaminants and limits

The contaminant panel is a finished-product calculation, not only a drum result. The table below is the catalog release panel for this powder. The EU additive specification sets its own limits for arsenic, lead and mercury, and JECFA's monograph for lysozyme hydrochloride sets lead at not more than 2 mg/kg; the destination text and the daily dose decide the final gate.

Catalog contaminant and microbiology limits · lysozyme hydrochloride
ParameterCatalog limitWhat the file should show
Lead (Pb)≤3 mg/kgLot result, method and the finished-product calculation
Arsenic (As)≤2 mg/kgLot result and the destination limit that applies
Cadmium (Cd)≤1 mg/kgLot result and any category exception
Mercury (Hg)≤0.1 mg/kgLot result and method
Total plate count≤1,000 cfu/gThe measured count for the lot
Yeast and mould≤100 cfu/gThe measured count for the lot
E. coli and SalmonellaAbsentThe absence statement and the sample size

A sum of heavy metals is not a substitute for the element that matters. Ask for a figure per element, with the method and the detection limit. A “not detected” line without a limit describes the method's sensitivity, not the sample.

Claims and the label

The label names the material, the quantity and the source in the form the destination requires. For this ingredient the name is not settled by the word “lysozyme” alone: the powder is a hydrochloride, and the destination may expect the salt name, the enzyme name or the additive name E 1105. The salt comparison sets out the naming difference.

No disease-related claim is made for this material, and an activity figure in U/mg is not a clinical result. A structure/function or other permitted statement is reviewed by the brand's regulatory reviewer for the product, the form and the market; the certificate does not approve it. An antimicrobial function in a food is a technical effect, not a health claim, and it does not become one when the same powder is put in a capsule.

Documents for the file

  • Specification, with the revision number, the salt form, the activity unit definition and the assay reference.
  • COA for the lot, with the measured results, methods, release limits and lot code.
  • Technical data sheet and safety data sheet, including any respiratory-sensitiser statements.
  • Allergen statement for the declared source (egg, where the material is egg-white lysozyme), and the source statement.
  • Origin, GMO and residual-solvent statements.
  • Regulatory support for the destination route, as agreed with the buyer.
  • Change-control notice for any change in source, salt form, process or pack.

Checklist before the first order

  • Specification version, CAS number and the exact salt form are named.
  • The intended use and the destination market are written into the quotation.
  • COA, TDS, SDS, allergen, origin, GMO and residual-solvent documents are on file.
  • The contaminant results are converted to the finished-product dose.
  • The label name, the activity declaration and the allergen statement have been reviewed.
  • The source, process and pack are under change control.
  • The quotation, the specification and the certificate refer to the same version.

The catalog specification sits on the product hub; the COA page explains the lot certificate; the identity page covers the analytical evidence; the quality page describes the release file; the EU regulatory note and the methods library provide the framework references.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation