02.1 Invertase vs amylase

Invertase vs amylase: two sugar enzymes, two units

Technical document 02.1 · Reviewed 2026-11-20 · Invertase

On this page
  1. Sucrose, starch and two different bonds
  2. Two activity scales with different definitions
  3. What each assay actually measures
  4. Why there is no conversion factor
  5. Blends and the label
  6. Choosing one for a purchase order

Invertase and amylase are both sold as sugar-acting enzymes, but they work on different bonds and are measured on different scales. Invertase splits sucrose into glucose and fructose and is assayed as micromoles of sucrose hydrolysed per minute. Alpha-amylase thins starch and is assayed by a dextrinisation method reported in SKB or DU. No factor converts one unit into the other.

In one line

Invertase and amylase both act on sugar substrates, but their units measure different reactions, so no factor converts one into the other.

Sucrose, starch and two different bonds

Sucrose is a disaccharide of glucose and fructose joined through a β-fructofuranoside bond. Invertase hydrolyses the terminal non-reducing β-D-fructofuranoside residue and releases the two monosaccharides. Starch is a polymer of glucose joined through α-1,4 bonds, with α-1,6 branch points. Alpha-amylase cuts the internal α-1,4 bonds and produces dextrins and maltose. The two enzymes share a substrate class — carbohydrates — and nothing else at the bond level.

That difference decides the application. Invertase is used where the target is sucrose: fondant and soft centres, invert sugar syrup, and blends where a controlled inversion is wanted. Amylase is used where the target is starch: baked goods, starch processing and viscosity control. A formulator who substitutes one for the other has changed the reaction, not the dose.

Two activity scales with different definitions

Two enzymes, two activity scales
EnzymeUnitWhat the unit measuresTypical method
InvertaseU (µmol/min)Sucrose hydrolysed, measured as glucose or reducing sugarSucrose substrate, fixed pH and temperature, glucose detection
Alpha-amylaseSKBStarch dextrinised against an iodine endpointSoluble starch, iodine colour, fixed time and temperature
Alpha-amylaseDUStarch dextrinised per hourIodine endpoint, method-specific definition
Unspecified“Units”Nothing comparableNot a specification

The final row is not a definition at all. A figure of “100,000 units per gram” that omits the substrate, the temperature and the endpoint cannot be verified on receipt; each method above would give a different value for the same powder.

What each assay actually measures

Invertase is a molar rate: the laboratory measures glucose or reducing sugar released from sucrose and converts it to micromoles per minute. The result is a count of bonds broken. Alpha-amylase is an endpoint method: the laboratory watches an iodine colour or a viscosity fall as starch is thinned, and the time to the endpoint is converted through a method factor. The result is a dextrinisation rate, not a molar count.

The conditions differ too. A common invertase assay runs at pH 4.5 and 55 °C; the SKB method runs at pH 4.8 and 30 °C. Each enzyme is measured near its working window, and the numbers are not transferable. A laboratory cannot run the invertase assay and report SKB, or the reverse.

Why there is no conversion factor

A conversion would only work if the ratio between the assays stayed constant from one preparation to the next. It does not: the substrate, the endpoint and the arithmetic all change. A catalogue that prints a single “enzyme activity” number for a blend has hidden the problem, not solved it.

What can be converted is a total within a single scale. Ten grams at 100,000 U/g contains one million units; fifty grams at 20,000 U/g contains the same total. The arithmetic is exact, and it is the only safe conversion between totals; it says nothing about SKB or DU. If a buyer needs the other scale, the second assay has to be run on the same lot.

Blends and the label

Blends are where the unit confusion becomes a label problem. A digestive-enzyme blend may contain invertase, amylase, protease and lipase; each has its own unit and method. The label should declare each activity with its unit, and the specification should name the method. A single “total activity” figure cannot be checked and does not tell the buyer how much of either enzyme is present.

Formulation follows the same logic. The overage for invertase is set on the sucrose reaction in the matrix; the overage for amylase is set on the starch reaction. One does not cover the other. If the blend is assayed, each enzyme needs its own method, and the methods have to be inside the laboratory's scope.

Choosing one for a purchase order

Choose invertase when the process target is sucrose hydrolysis: a fondant that should soften, an invert sugar syrup, or a blend where sucrose is the substrate. Choose alpha-amylase when the target is starch thinning: a batter, a starch slurry or a process where viscosity has to fall. If both reactions are wanted, specify both enzymes separately, each with its own activity, unit and method.

The purchase order should carry four lines per enzyme: the identity (EC number and source), the activity with its unit definition, the assay method and conditions, and the basis (per gram of preparation as sold). A quotation that gives only “invertase” and “amylase” with a percentage has not specified either enzyme.

The two catalog items are described on the invertase product page and the amylase product page. The amylase unit question continues on the amylase grades page; the methods library compares the assay families; the quality page describes the release sequence; the assay glossary entry defines the vocabulary.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation