03 Stability

Invertase stability: heat, moisture and the pack

Technical document 03 · Reviewed 2026-11-20 · Invertase

On this page
  1. The powder: moisture, heat and the seal
  2. The solution: working window and hold time
  3. What drives the loss
  4. A stability protocol for the preparation
  5. The finished formula changes the target
  6. How the shelf life is set

Invertase is a protein, and it loses activity when it is heated, wetted or held in solution. The dry powder is the more stable format; the sealed pack, the storage temperature and the moisture barrier set the shelf life. A liquid preparation adds microbial and preservative questions that a powder does not have.

In one line

Invertase loses activity through heat and moisture, so the pack and the storage temperature decide the shelf life, not the powder alone.

The powder: moisture, heat and the seal

The catalog allows loss on drying up to 5.0%, but that figure is the release gate, not a storage allowance. An opened pouch can take moisture from the air, and the as-is activity falls as water dilutes the preparation. In practice the seal and the dryness of the store are part of the specification, even when the certificate does not print them.

The powder dusts and its carrier takes up water. Keep it in the original pouch or in a sealed, opaque container; an open tray on the bench is not storage. After cold storage, open the pack only once it has reached room temperature, or water will condense on the powder.

Heat is the second driver. A sealed pouch in an ordinary warehouse is usually fine; a hot loading dock, a parked car or a shelf in direct sun is not. The specification should give a storage temperature range, and the label should repeat it.

The solution: working window and hold time

For a yeast invertase, the working range is commonly pH 4.5–5.5 and 50–60 °C. Those are activity conditions, not storage conditions. Minutes or hours at 55 °C belong to a process step; days at 25 °C belong to storage. Above the working window the protein denatures, and the activity does not come back.

Water also brings microbes. Sucrose solution feeds them, and an enzyme preparation is not sterile. Preservatives, cold storage and a validated hold time are process decisions. Iron and copper can inhibit the enzyme, so check the contact materials. Light matters less than it does for a photolabile small molecule, but a clear bottle is still a poor choice for a long hold.

What drives the loss

Factors that move invertase activity during storage and use
VariableEffectControl
HeatDenatures the protein; the loss is not reversibleCool store; add after the process has cooled
MoistureDilutes the preparation; raises loss on dryingSealed pouch; dry store
pHMoves the enzyme away from its working windowBuffer the solution; validate the matrix pH
Time in solutionActivity declines during the holdValidate the hold time; dose at the point of use
Metal ionsInhibit the enzymeAvoid iron and copper contact
Microbial growthSpoils a liquid preparationPreservative, cold chain, validated hold

These variables interact. A warm, wet powder loses activity faster than a cool, dry one, and a sucrose solution at 40 °C brings heat, water and microbial risk together. The question is never whether invertase is stable in the abstract; it is how long it holds its activity in a named pack at a named temperature.

A stability protocol for the preparation

A protocol should name the pack, the condition, the time points and the tests. One arm at 25 °C/60% relative humidity represents the warehouse, a second at 30 °C/65% adds a margin, and 40 °C/75% puts stress on the pack. Add a refrigerated arm if cold storage is recommended, and a solution arm at the process pH and temperature if the customer holds the enzyme in water.

At each point, test activity, loss on drying, appearance, pH where relevant, and microbiology. Report the numbers rather than a pass statement, and identify the pack and the lot family. A summary for a 1 kg pouch does not transfer to a 25 kg drum: the headspace and the surface-to-volume ratio differ, and so does the way each pack is opened.

The finished formula changes the target

In a fondant or a soft centre, the enzyme is supposed to act. It hydrolyses sucrose during storage and keeps the centre soft, and the formulator sets the rate through dose, water activity and storage temperature. The target is a balance: an enzyme that is too stable leaves the centre hard, while too much activity turns it into a syrup that leaks. The enrobing temperature and the chocolate layer both play a part.

In a dry blend the aim reverses: the enzyme has to survive until the consumer uses it, and the carrier, the moisture of the other ingredients and the pack decide whether it does. A liquid aims at a shelf life, with a preservative and a validated hold. The same bulk powder can be right for one format and wrong for another.

How the shelf life is set

No single shelf-life number applies to invertase; the answer depends on the pack and the storage condition. The retest period belongs on the specification, and the stability file for that pack is its support. A figure without a named pack, a storage temperature and a test panel is only a number.

When the retest period ends, assay the retained sample again before extending use; never extend it by assumption, and never transfer a bulk figure to a repacked pouch or a liquid. The product hub shows the standard packs; the MOQ page covers the packs and the order window; the quality page describes the release file; the methods library explains the assay families; the loss-on-drying entry defines the moisture test.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation