02 Grade comparison

100,000 SKB/g or a dilution: choosing an amylase grade

Technical document 02 · Reviewed 2026-11-19 · Amylase

On this page
  1. No purity figure exists for an enzyme
  2. Three forms in the catalog
  3. Mesh, flow and dust
  4. Working out the charge weight
  5. Turning the choice into specification lines
  6. When dilution works against you

Grade choice for this powder comes down to three variables: the activity per gram, what that activity is carried on, and the particle form. The catalog standard is a 40 mesh powder at ≥100,000 SKB/g; a dilution to an agreed lower activity and a granulated version exist as options. Each choice changes what a gram does and what else enters the formula.

In one line

A grade is an activity figure plus the material that carries it, so the SKB/g number alone does not tell a formulator what a gram of powder will do to the blend.

No purity figure exists for an enzyme

An enzyme preparation is a fermentation product that has been concentrated and standardised. It contains the enzyme, other proteins and fermentation residues, and whatever carrier was used to bring the activity to the declared figure. No single percentage captures that mixture, so the trade describes a grade by its activity, its carrier and its form instead.

Two catalogues can both say "fungal alpha-amylase" and mean different materials: one a 100,000 SKB/g concentrate, the other a 25,000 SKB/g dilution that carries four times the mass for the same number of units. Both are legitimate products for different jobs. They are not interchangeable gram for gram, and the COA page explains how each is certified.

What the grade controls
ChoiceWhat it setsWhere it bites
ActivityUnits delivered per gramCharge weight, overage, label basis
CarrierWhat the enzyme is diluted onIngredient list, moisture pick-up, flow
MeshParticle size and surfaceMixing, wetting, airborne dust
FormPowder or granuleDust control, dispersion time, process loss
StrainThe organism behind the lotIdentity file, market authorisation

Three forms in the catalog

The standard powder is the reference grade. The dilution is made to an agreed activity when a formula needs a heavier charge; the granulated option is made when dust is the constraint. All three are the same enzyme from the same organism, standardised to different targets.

Catalog options and the formula consequence
OptionActivityFormConsequence for the formula
Standard powder≥100,000 SKB/g40 mesh powderLightest charge; made for blends
DilutionAgreed in the specificationPowderHeavier charge; more carrier on the label
GranulesAgreed in the specificationGranulatedLess dust; slower wetting; process loss to check

None of these figures can be compared across unit systems. An SKB/g result and a DU/g result describe different assays, as the SKB and DU note sets out.

Mesh, flow and dust

At ≥95% through 40 mesh, roughly 420 µm, the powder mixes evenly into a dry blend and wets quickly in water, giving the clear to faintly hazy solution the specification describes. The same fines that speed wetting also stay airborne. Enzyme dust is a respiratory sensitiser, so extraction, closed transfer and a suitable mask belong in the handling plan, and the SDS carries the hazard language.

Granules trade wetting speed for a cleaner room. They are the better choice where operators handle kilos a day; they are the wrong choice for a stick pack that must disperse in seconds. Granulation also adds water and heat, so the activity of the granule has to be measured after the step rather than calculated from the powder that went in.

Working out the charge weight

Begin with the units the batch needs. A 200 kg blend dosed at 50,000 SKB per kilogram requires 10 million SKB, which is 100 g of the 100,000 SKB/g powder or 500 g of a 20,000 SKB/g dilution. The units are identical; the mass, the carrier load and the label entry are not. At the dilution, each part of enzyme arrives with four parts of carrier.

Weighing decides most cases. A 100 g charge is routine on a production scale and fiddly in a 5 kg pilot, where both balance and mixer resent a small addition. A dilution buys precision with carrier, and the carrier then has to be declared and dispersion-tested like any other ingredient.

Two details belong beside the arithmetic: the label basis, release or end of shelf life, and a certificate for the diluted lot itself. The concentrate's assay does not certify the dilution made from it.

Turning the choice into specification lines

Seven lines: activity with unit and method reference; loss on drying at ≤8.0%; particle size at ≥95% through 40 mesh; carrier identity; production organism and strain; form; and the labelled basis with the storage statement. A line that cannot be measured at goods-in does not belong in a purchase specification.

Write the activity as "not less than" and keep the method appendix under change control. If the starch source or the colour reference changes, two results carrying the same unit are no longer comparable. The specification glossary entry covers the vocabulary, and the identity page covers the checks that keep a diluted lot honest.

When dilution works against you

A blend already near its carrier ceiling gains nothing from more diluent. A formula that has no room for more water gains nothing from a diluent that binds it. A short ingredient list gains nothing from a line that exists only to make the scoop heavier.

Scale adds a fourth case. A dilution that solves a pilot weighing problem becomes an extra material to test, declare and store once the batch is large enough to weigh the concentrate directly. Choose the grade for the batch size you will run most often, not for the trial.

Catalog values are on the amylase product page; pack sizes and lead time are on the MOQ page; and how each form holds activity is on the stability page.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation