Invertase grades: powder, liquid and activity level
Invertase is sold as a powder or a liquid, at different activities per gram or per millilitre, from different production organisms. The catalog item here is a powder at ≥100,000 U/g. Changing the grade changes the weight in the formula, the assay conditions, the storage and sometimes the regulatory reference, so the grade belongs in the specification, not in the packing list.
The grade is the form, the activity per gram and the production organism; changing any one changes the dose, the assay and the label.
Why invertase comes in more than one grade
An enzyme preparation is not a single chemical. It contains the enzyme, residual fermentation solids, a carrier or stabiliser, and water. A grade fixes those variables and the activity per unit weight. The same word on two quotations can therefore describe a powder at 100,000 U/g, a granulated powder at 50,000 U/g, or a liquid at 200,000 U/mL.
Three pressures push a buyer to one grade. The dosage form decides whether a solid or a liquid can be handled. The process decides how much activity is needed per kilogram of substrate. The market decides whether the production organism and the carrier fit the regulatory file. A grade that is convenient in the pilot may be the wrong one in production.
The grade families side by side
| Grade | Activity basis | Typical use | What changes |
|---|---|---|---|
| Standard powder | U/g, 80 mesh | Dry blends, fondant, bakery | Baseline; dusts and picks up moisture |
| Granulated powder | U/g, coarser | Blends that need flow | Dissolution and dust change; activity per gram may differ |
| Liquid | U/mL | Syrups and continuous dosing | Preservative, cold storage and microbial load |
| High-activity powder | U/g, higher | Small dose in a large batch | Weighing accuracy at a small dose |
The table describes families, not a product list. The catalog here is the standard powder: white to light tan, ≥95% through 80 mesh, loss on drying ≤5.0%, ≥100,000 U/g. A granulated form can be requested. A liquid preparation is a different purchase with its own carrier, preservative and storage.
Form, solubility and handling
The powder is white to light tan and free-flowing. It dissolves in water to a clear to slightly turbid solution; the turbidity comes from carrier and residual solids, not necessarily from poor quality. The catalog particle size is ≥95% through 80 mesh, which suits a dry blend and keeps the powder dispersed in a fondant. Loss on drying is ≤5.0%; a powder close to that limit has little margin for moisture uptake.
Two physical points matter at the bench. First, the powder is a protein preparation and it dusts; weigh it in a ventilated area and avoid raising a cloud. Second, the activity is not uniformly distributed if a small scoop is taken from a large drum that has settled. Roll or blend the drum before sampling, and take the sample from the full depth.
A liquid grade is measured in U/mL, not U/g, and it carries water, a preservative and a microbial risk that a powder does not. Its colour and clarity are not identity tests. If a process can take a powder, the powder avoids the preservative and cold-chain questions.
Dosing is arithmetic on activity
Decide how many units the process needs, then divide by the measured activity of the lot: grams = units required ÷ U/g. A trial that needs 2,000,000 U and a lot at 100,000 U/g weighs 20 g. The same trial with a lot at 150,000 U/g weighs 13.3 g. The label minimum is not the number to use for either calculation; the batch result is.
Three corrections follow. The process loses activity to heat, pH and time, so the formulator may add an overage; that is a process decision validated in the matrix, not a property of the powder. The finished blend has its own activity per gram, and that is the figure to declare if the blend is sold as an enzyme preparation. And a small dose in a large batch needs a weighing check: at 20 g in 100 kg, a 1 g error is 5% of the dose.
None of this is a serving recommendation. In a supplement blend, the enzyme is an ingredient with a technical function, and any label statement is a separate regulatory question.
What to write into the specification
- “Invertase (β-fructofuranosidase), EC 3.2.1.26, CAS 9001-57-4.”
- “Production organism and strain; carrier and stabiliser.”
- “Form: powder, ≥95% through 80 mesh, or granulated.”
- “Activity ≥100,000 U/g; state the unit definition, sucrose substrate, assay pH and temperature.”
- “Loss on drying ≤5.0%; heavy metals and microbiology as listed.”
- “Storage condition and retest period for the pack.”
- “Destination market and intended use, confirmed before the order.”
The source organism belongs in the specification because it is part of identity and because the EU E 1103 monograph names Saccharomyces cerevisiae. An invertase from another host is a different article with its own file.
When another grade is the wrong choice
Four grade changes are usually wrong. A liquid in a dry blend adds water and a preservative to a powder that did not need either. A coarse granule in a syrup dissolves too slowly and leaves a residue. A high-activity powder in a small batch is hard to weigh accurately, and the error is larger than the activity gain. A switch of production organism without a new identity and stability check changes the protein pattern and possibly the regulatory route.
The reverse also matters: a higher activity than the process can use adds nothing if the dose is fixed by the substrate. Match the grade to the process, then write the activity, the form and the source into the specification.
The catalog item is described on the invertase product page. The COA page explains how to read the certificate; the level-four page compares the units with amylase; the MOQ page covers ordering; the specification glossary entry defines the term.
In this document
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation