Bromelain activity falls with heat and moisture; the process decides the shelf life
Bromelain is a protein, and the activity declared on the certificate is the property most sensitive to how the powder is dried, blended, granulated, tableted and packed. A dry powder in a sealed foil pack holds its activity far longer than the same powder wetted, heated or left open. The process step that adds heat or water is the step that decides the shelf life.
Dry, cool and sealed keeps bromelain; heat, water and an extreme pH take activity away, and the process step that adds them sets the shelf life.
The dry powder is the stable state
The catalog limits are ≤5.0% loss on drying and a pH of 5.0–7.0 in 1% solution. Together they describe a powder dry enough and neutral enough for ambient handling. Water is the variable that matters most: at low moisture the protein is glassy and the unfolding that destroys activity is slow; as water content rises, the protein gains mobility and the rate of loss rises. The pack is part of that control. A 1 kg foil pouch or a lined 25 kg drum keeps the powder dry only while the seam and the liner are intact.
Storage at ambient temperature in a closed pack is the normal condition. Refrigeration is not a substitute for a dry pack: a cold pouch opened in a warm room condenses water on the powder, doing more damage than the warmth avoided. For a long hold, a stable cool temperature in the sealed pack is better, and the stability data should match the label condition.
Moisture also feeds microorganisms. The micro specification — APC ≤10,000 cfu/g, yeast and mould ≤100 cfu/g, E. coli and Salmonella absent — is a release gate, not a licence to store the powder damp. A lot that passes at release can fail after a humid week in an open drum.
Once water is added, the clock runs faster
In solution the protein is fully hydrated, and activity declines during storage even at room temperature. The pH matters: the catalog 1% solution sits at 5.0–7.0, and moving outside that window, or holding it warm, increases the loss. A drink mix is usually a dry powder, so test the mix, not the drink; a ready-to-drink application needs its own data and hold time.
If a process uses a liquid intermediate — a coating suspension, a granulation fluid or a slurry — the time and temperature of that step belong in the process record. A short, cold contact is not the same as an overnight hold, and the activity after the step is what the tablet or the granule actually carries.
What drives the loss
| Factor | Effect | Control |
|---|---|---|
| Heat | Faster unfolding and loss | Keep process temperature low and time short |
| Water | Mobility, caking, microbial growth | Dry to ≤5.0% LOD, foil pack, desiccant |
| pH | Activity outside the stable window | Check the matrix pH, not only the powder |
| Shear and foam | Surface denaturation | Low-shear mixing, anti-foam control |
| Metal ions and oxidants | Loss of activity | Source control, ingredient compatibility |
| Light | Slow contribution | Opaque pack or carton |
| Time | Background loss | Real-time data, end-of-shelf-life limit |
The table is qualitative on purpose. The size of each effect depends on the matrix, the moisture and the temperature, and only a measurement on the formula shows its size. A supplier's powder stability says what the drum does; it does not predict what a tablet with an acidic excipient does.
A stability protocol that answers the question
Run real-time storage at the condition on the label, with an accelerated arm beside it. A common design is 25 °C and 60% relative humidity for real time, and 40 °C and 75% relative humidity for the accelerated arm, with assay points at 0, 1, 3, 6, 12 and 24 months. The assay is GDU/g with the same method as the release certificate, plus loss on drying, appearance and micro at the start and end.
Test the material the customer buys. If the product is a tablet, the stability sample is the tablet; if it is a stick pack, it is the sealed stick. A powder study cannot stand in for a tablet: the press adds heat and shear, and the excipients bring their own pH and water. Include a control at 4 °C to separate true instability from assay drift, and keep the raw data, not only the conclusion.
Accelerated data is a screening tool for an enzyme, not a shelf-life claim. A lot that loses activity at 40 °C may still be acceptable at 25 °C, and a lot that passes the accelerated arm can fail in real time. The shelf life should rest on real-time data for the pack and matrix, with the accelerated arm used to flag a formula before the long study finishes.
Granulation, tableting and the pack
Wet granulation combines the two factors that remove the most activity: water and heat. A water granulation with a hot drying step can remove a large share of the activity before the tablet exists, and the loss is invisible in the powder certificate. Dry granulation by roller compaction avoids the water but adds pressure and heat; direct compression avoids both the water and the drying step but still exposes the powder to punch heat and shear.
Coating is a separate risk. Aqueous film coating wets the tablet and dries it with hot air; an organic coating avoids water but brings solvent handling. Effervescent systems are the least friendly matrix, because the tablet is designed to dissolve in water and the powder bed is sensitive to humidity. Stick packs and sachets are the friendlier format, provided the foil and the seal keep water out.
The pack is part of the formula. A foil laminate with a sealed seam, a desiccant where the matrix needs one, and a nitrogen flush for a sensitive blend all change the shelf life. A fiber drum needs a food-grade liner that is intact at the rim; without it the drum is a shipping container, not a moisture barrier. A pack change is a stability change and needs its own data.
Assigning the shelf life
The label activity is an end-of-shelf-life figure. If the label declares 2,400 GDU/g and the real-time study shows 85% retention at the target shelf life, the release target has to sit near 2,820 GDU/g for the label to remain true at the end. That is arithmetic, not a batch result, and the retention figure has to come from the study on that matrix and pack.
Where the retention is not known, the shelf life should be short and justified, not long and assumed. The storage statement on the pack — cool, dry, sealed — is part of the claim, and a label that promises a shelf life the pack cannot deliver is a specification error, not a marketing one. The COA page shows the activity and moisture rows the study follows; the grade page explains why a diluted grade carries more carrier into the matrix; the ordering page covers the packs. The product page lists the catalog limits, and the loss-on-drying note defines the moisture term.
Related documents
Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.
Request a quotation