06 Identity & adulteration

How we prove a bromelain lot has the declared activity

Technical document 06 · Reviewed 2026-11-19 · Bromelain

On this page
  1. Four layers, one claim
  2. The activity assay
  3. Activity against protein
  4. XRD, and why it cannot identify bromelain
  5. The routes that pass a weak test
  6. How to write the specification
  7. Five questions for a supplier

A bromelain lot is identified by four layers that have to agree: the pineapple source, the protein, the gelatin activity and the lot record. The activity figure alone is the weakest of the four, because a powder can carry the declared GDU/g and still be a different preparation. The specification and the certificate should make each layer checkable.

In one line

A bromelain lot is identified when the pineapple source, the protein, the gelatin activity and the lot record agree; no single number carries the claim.

Four layers, one claim

Layer one is the source: Ananas comosus, stem, country of origin, supplier and extraction route. Layer two is the protein: total protein and the band pattern on a gel. Layer three is the activity: GDU/g by the gelatin method, on an as-is basis, with the method's conditions. Layer four is the record: the lot code, the certificate, the retained sample and the audit trail that connects them.

Identity layers · question and evidence
LayerQuestionEvidence
SourceIs it pineapple stem?Supplier declaration, origin, plant part
ProteinIs the protein bromelain?Protein content, gel band pattern
ActivityDoes it work on gelatin?GDU/g with substrate and conditions
RecordIs this the lot tested?Lot code, COA, retained sample

No single layer carries the claim. A source declaration without activity is a statement about a plant; an activity figure without a source is a number about a powder; a certificate without a lot code is a document about no particular drum.

The activity assay

One GDU is the amount of enzyme that liberates 1 mg of amino nitrogen from gelatin in 20 minutes at 45 °C and pH 4.5. The assay is a rate measurement, so the substrate, the pH, the temperature, the time and the standard all belong in the method. The result is reported per gram as-is, and the loss-on-drying result belongs beside it: a wetter powder carries fewer GDU per gram even when the dry solids are unchanged.

The GDU assay is not one locked international method. Published versions and in-house modifications differ in the gelatin, the pH (4.5 in the common definition, 5.5 in some method sheets), the endpoint and the standard. Two laboratories can return different figures for the same powder, so a specification that names only “GDU/g” leaves the method open. The certificate should name the method, and the buyer should ask whether it is the same method as the reference product.

Activity is also not identity. A fungal protease or a papain preparation can liberate amino nitrogen from gelatin and return a GDU figure. The assay says the powder hydrolyses the substrate; it does not say which protein did it.

Activity against protein

Protein content is measured by Kjeldahl nitrogen, by Bradford or by biuret, and each method has its own bias. The useful figure is the ratio: GDU per milligram of protein, or specific activity. For a fixed grade that ratio should be stable across lots. A falling ratio at a constant GDU/g means more protein is present for the same activity, which points to dilution with a protein carrier, a different extraction cut or an inactivated fraction.

The ratio also separates dilution from inactivation. Diluting an active powder with a carrier lowers GDU/g and protein roughly together, so specific activity holds. Heating a powder lowers GDU/g while protein stays, so specific activity falls. Neither movement is visible on an activity certificate that reports only the GDU/g result, which is why the protein figure belongs in the file.

Do not turn the ratio into a purity claim. Bromelain preparations contain several protein components, and the specific activity depends on the assay and the protein method. Use it as a trend within one supplier and one method, not as a universal threshold.

XRD, and why it cannot identify bromelain

Bromelain is an amorphous protein preparation, so its powder diffractogram is a broad halo rather than a pattern of sharp peaks. XRD cannot tell a pineapple stem extract from another protease, confirm the Ananas comosus source or see the GDU activity. Peaks that do appear usually come from a crystalline carrier or an inorganic contaminant. A protein structure solved by X-ray crystallography requires a purified single crystal, not a standardised food powder.

Identity evidence sits in the gelatin assay with its conditions, the protein content, and the SDS-PAGE band pattern compared with a reference lot; a chromatographic profile can be added where the supplier changes the extraction route.

The routes that pass a weak test

Adulteration routes · what the COA shows and what detects it
RouteWhat passesWhat detects it
Dilution with carrierDeclared GDU/g if the blend is assayedCarrier declaration, mass balance, specific activity
Other proteaseGDU/g on gelatinProtein band pattern, source-specific test
Inactivated powderProtein contentGDU/g and specific activity
Fruit instead of stemProtease activitySource declaration, band pattern, supplier audit
Overstated activityA certificate figureIndependent assay with the named method

The table is not a list of accusations; it is a list of checks. Most lots are what the certificate says. The point is that a buyer who checks only the GDU/g has one layer of four, and the other three are easy to request.

How to write the specification

  • “Bromelain, enzyme preparation from Ananas comosus stem, CAS 9001-00-7.”
  • “Activity ≥2,400 GDU/g by the gelatin digestion method, as-is basis, method and conditions stated on the COA.”
  • “Protein content and specific activity reported; band pattern on request.”
  • “pH 5.0–7.0 in 1% solution; loss on drying ≤5.0%; ≥95% through 40 mesh.”
  • “Heavy metals Pb ≤3 · As ≤2 · Cd ≤1 · Hg ≤0.1 mg/kg; APC ≤10,000 cfu/g; yeast and mould ≤100 cfu/g; E. coli and Salmonella absent.”
  • “Carrier and any other enzyme activity declared; no undeclared diluent.”

The phrase “no undeclared diluent” is doing real work. A lower-activity grade is a legitimate dilution, but the carrier belongs in the specification and on the certificate, not only in a covering email.

Five questions for a supplier

  1. Which GDU method did you use, and what are the substrate, pH, temperature, time and standard?
  2. Is the result on an as-is or dried basis, and what was the loss on drying for that lot?
  3. What are the protein content and the specific activity, and what method produced them?
  4. Which plant part and origin supplied the lot, and is the material 100% Ananas comosus?
  5. What carrier or other enzyme activity is present, and where is it declared?

If the answer to the first question is “the standard method”, ask for the method sheet. If the answer to the fifth is “none”, ask for the mass balance. The COA page shows where each answer sits on the certificate; the grades page covers the dilution arithmetic; the GDU versus FIP page covers the unit question. The product page carries the catalog limits, and the quality page describes the release workflow.

Send the specification you intend to use — grade, quantity and destination market — and we will reply with the batch COA, the technical data sheet and a quotation.

Request a quotation